"Is it normal to have a slight "bow" to the neck? Built a neck on top and not using heavy strings. (first build)"

Views: 87

Replies to This Discussion

Depends on the density of Wood 

It's the Gitty Pure & Simple kit - same design as a Crow with neck on top. Not a huge bow but maybe 1/16 - 1/8 inch ?

Stiffness of the neck (affected by the dimensions, species, and how the grain is oriented) will be your biggest consideration with respect to neck bowing. Other things impact it too but start with a good stiff neck. If you lay a straightedge on the neck, how much of a gap do you have in the middle?

Laid a metal ruler about in the middle of neck ---- I'd say about 1/16" gap. doesn't affect the strings or playing just something I noticed.

Many guitar techs purposely induce a small amount of relief (bow) in the neck. A perfectly straight neck requires a light touch when picking.

Thanks for the info.

Hi, the bow or relief in the neck is normally measured in 1000ths of an inch at the 7th fret, and is different for different set ups. If you have 1/16 to 1/8" I'd say that neck is crap. I would set relief at around  10 thousandths of an inch. I use feeler gauges. 

With a bow in the fingerboard one normally has the have a higher action to avoid fretting out (buzzing) at the high end, which in turn affects intonation. Can you get the neck exchanged.

Taff

Hi again, I should mention that the relief {bow] is measure over the 7th fret with the 1st and 12th fret held down. The fingerboard can then be seen to bow away from the straight string. On a long scale you would fret higher than the 12th fret.

Taff 

Taff - it's a fretless neck (strictly slide) and sounds great. Replaced the Flying Bridge with a piece of threaded rod . Lowered my strings a bit and seems to be fine.

Great, maybe my info will help others. At least you will not get any fret buzz, ha ha.

LOL. I'll post a pic with a metal ruler just for good measure. Hey, ALL info is most welcome.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

How could this be?

Started by stephen davies. Last reply by stephen davies Jul 9. 2 Replies

Grounding

Started by Robert M J Loftus. Last reply by stephen davies Jun 30. 6 Replies

Pickup Placement on High G Ukulele

Started by Chris Sturhann. Last reply by Chris Sturhann Jun 19. 2 Replies

Shipping

Started by Virginia Bill. Last reply by Jim Brown Jun 12. 4 Replies

Neck Bowing?

Started by Craig Cole. Last reply by Craig Cole Jun 11. 11 Replies

Springs in an acoustic cbg

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Will "KOOL DOG HOOCH" Bonner Jun 1. 8 Replies

Weird Little Install Issue

Started by Craig Cole. Last reply by Craig Cole Jun 1. 5 Replies

CBGitty Amp kit

Started by Art Prior. Last reply by Paul Craig May 31. 4 Replies

Earthing Strings

Started by mitch jones. Last reply by mitch jones May 18. 7 Replies

Like a box of chocolates

Started by Michael shrader. Last reply by Michael shrader May 11. 3 Replies

Intonation problem

Started by Ramson. Last reply by Will "KOOL DOG HOOCH" Bonner May 3. 14 Replies

Pure and simple CBG

Started by Bill McNamara. Last reply by Craig Cole Apr 30. 6 Replies

Scale length for 17" box

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Dennis "Denbo" Goodinson Apr 30. 29 Replies

Pickup to string distance

Started by Lou Ellis. Last reply by Lou Ellis Apr 9. 8 Replies

What strings should be used for 4 string cbc tuned to GDGD?

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Paul Craig Apr 8. 3 Replies

Bonehead rookie mistake

Started by Michael shrader. Last reply by Will "KOOL DOG HOOCH" Bonner Apr 7. 24 Replies

Neck, sound hole, strings and Bridge question.

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Will "KOOL DOG HOOCH" Bonner Apr 4. 9 Replies

Power tools - what buy next?

Started by Charles Z. Last reply by John Sawyer Apr 4. 6 Replies

Fretboard radius, is it to late?

Started by Ramson. Last reply by Ramson Mar 26. 7 Replies

Blog Posts

Getting ready for next build

Posted by Sean Murphy on July 17, 2019 at 12:54pm 1 Comment

What wood is this?

Posted by Sean Murphy on July 16, 2019 at 10:48am 7 Comments

apology

Posted by Danny Gordon on July 13, 2019 at 7:30pm 3 Comments

Latest Activity

Dennis "Denbo" Goodinson posted photos
4 minutes ago
Clint Spotts and Darryl Tuttle are now friends
17 minutes ago
Smokin' Guitars commented on Smokin' Guitars's photo
Thumbnail

Guitar rack

"I should have mentioned that the rack was a gift from my brother at Christmas. He found a few ideas…"
27 minutes ago
Darryl Tuttle commented on Smoothead's video
Thumbnail

One Step Away From The Blues

"Very good! Put a lot of work into this"
27 minutes ago
Smokin' Guitars commented on Smokin' Guitars's photo
Thumbnail

Guitar rack

"Build #10 The cohiba 4 string on the left is build #10. I bought a lot of 10 martin guitar…"
29 minutes ago
Uncle John commented on Clint Spotts's photo
Thumbnail

Tom Waits

"I like old Tom. Not a bad actor either."
29 minutes ago
Uncle John commented on Dave's photo
Thumbnail

Build #2 - pic 1

"Good on yer, Dave. Looks like a player. Go to page top under resources for 'how to play'…"
31 minutes ago
Metal hic posted a video

Irish tune (or britain?)

An old Irish (I believe) tune I played long time ago. This time, it's played on my new three strings guitar - the chanterelle is doubled Un vieil air Irlanda...
32 minutes ago
Uncle John commented on Smokin' Guitars's photo
Thumbnail

Guitar rack

"Very good!  I like a nice rack."
33 minutes ago
Metal hic posted a status
"Looks like I have troubles to upload video… her's the new one with the 3+1 strings https://www.youtube.com/watch?v=eNPsguvdMNM"
33 minutes ago
Smokin' Guitars posted a photo
33 minutes ago
Uncle John commented on BUGGY (C)'s video
34 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->