"Is it normal to have a slight "bow" to the neck? Built a neck on top and not using heavy strings. (first build)"

Views: 103

Replies to This Discussion

Depends on the density of Wood 

It's the Gitty Pure & Simple kit - same design as a Crow with neck on top. Not a huge bow but maybe 1/16 - 1/8 inch ?

Stiffness of the neck (affected by the dimensions, species, and how the grain is oriented) will be your biggest consideration with respect to neck bowing. Other things impact it too but start with a good stiff neck. If you lay a straightedge on the neck, how much of a gap do you have in the middle?

Laid a metal ruler about in the middle of neck ---- I'd say about 1/16" gap. doesn't affect the strings or playing just something I noticed.

Many guitar techs purposely induce a small amount of relief (bow) in the neck. A perfectly straight neck requires a light touch when picking.

Thanks for the info.

Hi, the bow or relief in the neck is normally measured in 1000ths of an inch at the 7th fret, and is different for different set ups. If you have 1/16 to 1/8" I'd say that neck is crap. I would set relief at around  10 thousandths of an inch. I use feeler gauges. 

With a bow in the fingerboard one normally has the have a higher action to avoid fretting out (buzzing) at the high end, which in turn affects intonation. Can you get the neck exchanged.

Taff

Hi again, I should mention that the relief {bow] is measure over the 7th fret with the 1st and 12th fret held down. The fingerboard can then be seen to bow away from the straight string. On a long scale you would fret higher than the 12th fret.

Taff 

Taff - it's a fretless neck (strictly slide) and sounds great. Replaced the Flying Bridge with a piece of threaded rod . Lowered my strings a bit and seems to be fine.

Great, maybe my info will help others. At least you will not get any fret buzz, ha ha.

LOL. I'll post a pic with a metal ruler just for good measure. Hey, ALL info is most welcome.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

How could this be?

Started by stephen davies. Last reply by stephen davies Jul 9. 2 Replies

Grounding

Started by Robert M J Loftus. Last reply by stephen davies Jun 30. 6 Replies

Pickup Placement on High G Ukulele

Started by Chris Sturhann. Last reply by Chris Sturhann Jun 19. 2 Replies

Shipping

Started by Virginia Bill. Last reply by Jim Brown Jun 12. 4 Replies

Neck Bowing?

Started by Craig Cole. Last reply by Craig Cole Jun 11. 11 Replies

Springs in an acoustic cbg

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Will "KOOL DOG HOOCH" Bonner Jun 1. 8 Replies

Weird Little Install Issue

Started by Craig Cole. Last reply by Craig Cole Jun 1. 5 Replies

CBGitty Amp kit

Started by Art Prior. Last reply by Paul Craig May 31. 4 Replies

Earthing Strings

Started by mitch jones. Last reply by mitch jones May 18. 7 Replies

Like a box of chocolates

Started by Michael shrader. Last reply by Michael shrader May 11. 3 Replies

Intonation problem

Started by Ramson. Last reply by Will "KOOL DOG HOOCH" Bonner May 3. 14 Replies

Pure and simple CBG

Started by Bill McNamara. Last reply by Craig Cole Apr 30. 6 Replies

Scale length for 17" box

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Dennis "Denbo" Goodinson Apr 30. 29 Replies

Pickup to string distance

Started by Lou Ellis. Last reply by Lou Ellis Apr 9. 8 Replies

What strings should be used for 4 string cbc tuned to GDGD?

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Paul Craig Apr 8. 3 Replies

Bonehead rookie mistake

Started by Michael shrader. Last reply by Will "KOOL DOG HOOCH" Bonner Apr 7. 24 Replies

Neck, sound hole, strings and Bridge question.

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Will "KOOL DOG HOOCH" Bonner Apr 4. 9 Replies

Power tools - what buy next?

Started by Charles Z. Last reply by John Sawyer Apr 4. 6 Replies

Fretboard radius, is it to late?

Started by Ramson. Last reply by Ramson Mar 26. 7 Replies

Blog Posts

Buying in bulk

Posted by Rick Tish on August 17, 2019 at 6:31pm 0 Comments

Shellac

Posted by Rick Tish on August 15, 2019 at 7:08pm 0 Comments

first post

Posted by Rick Tish on August 14, 2019 at 8:23am 0 Comments

My first

Posted by Myron Joe Hickel on August 11, 2019 at 9:13pm 5 Comments

Latest Activity

High Bird Handcrafted Instuments posted photos
49 minutes ago
Taffy Evans replied to Joan Pace's discussion Help Tuning
"Hi, check that your string gauge suits the G tuning. Also check where the string breaks, might be a…"
1 hour ago
BUGGY (C) commented on Downtown Vinnie's video
1 hour ago
Will "KOOL DOG HOOCH" Bonner replied to Clint Spotts's discussion Spring Reverb Advice
"I have a lid like that with a threaded rod for the knob to screw on to, it rings a perfect C. These…"
1 hour ago
BUGGY (C) commented on BUGGY (C)'s video
Thumbnail

She used to be so beautiful

"Yup I agree UJ... I only smoke when I'm on fire"
1 hour ago
BUGGY (C) commented on BUGGY (C)'s video
1 hour ago
Downtown Vinnie posted a video

Buckle Up Betsy

searchin for riffage.
2 hours ago
Rick Tish posted a blog post

Buying in bulk

My dad always said the same thing when he saw something marked at a way better than average price: …See More
2 hours ago
Rick Tish commented on Rick Tish's photo
Thumbnail

Orange blossom special

"just plain old whitewood board.  Nothing fancy."
2 hours ago
Uncle John commented on Poorness Studios's photo
Thumbnail

Started my second CB Gitty kit

"Thanks! I don't think they all do have the center block. I love tenor guitars in Chicago…"
2 hours ago
Uncle John commented on Thomas Case's photo
Thumbnail

#3 mando

"Excellent. Mandos are difficult builds."
2 hours ago
Uncle John commented on Thomas Case's photo
Thumbnail

#7 dobro

"Very nice!"
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->