I am working on my first build.  

It is a 3-stringer with an oak (not quartersawn) neck and a walnut fretboard.  

I like having quite narrow string spacing and wanted to replicate the string spacing I had on a couple of other guitars that I play.  Measuring up at the neck it looks like 25mm would fit the string spacing and give a bit to spare either side of the top and bottom strings.  Then I would taper it out to 35mm at edge of the box.  

Is this too narrow?  Am I removing too much wood from a neck strength point of view? Is it going to feel like I am playing a pencil instead of a guitar?

Please, could you let me know your recommendations? 

Views: 366

Replies to This Discussion

1 1/2 inches is the standard three string neck width and corresponds to a standard lumber board width.  Any narrower and you increase the probability of the string tension bending the neck.   you would need a truss rod to counteract this.   IMHO, a narrower neck would also not be comfortable to play.  It would be like playing a dowel rod or broom handle.  The string spacing on a three string is also easier to play slide on than a six string spacing as it is more forgiving.  I've been beating on guitars and basses for many years and it wasvery easy to transfer to the 1 1/2 inch neck and string spacing.

Thanks Chuck.  Finding hardwood seems to be a bit trickier in the UK.  I am making this guitar from a bannister. 

For timber in the UK try Feuillus Fencing,sapele,oak,lime,walnut,wenge etc.For fingerboards try your local model shop for 900 lengths of 6mm hardwood or on line SLEC.Or get to know a local builder,they are pulling out hardwood conservatories and doors,replacing them with plastic! Here's a photo of some of my collection from that source.The guitar neck is wenge from Feuillus,beware of the spelks! 

P.S.Feuillus also sell replacement laths for garden seats that are about the right size for a neck

Great advice - thank you!  I love the idea of the reclaimed hardwood too.  Really good value from Feuillus - that Wenge neck looks great. 

This tenor four string is 1 1/8" at the nut and 1 3/8" at the body.being a four string it does have steel in the neck.

Thanks - that looks like a lovely guitar. I think I am going to go for something in between your two recommendations.  I really appreciate the help.  I think I will put some steel in my next one to give me a bit more flexibility. 

Michael, 

Can I just ask a follow-on question here, please?  Did you also taper the thickness of the neck up to the fretboard as well? If so how thick is the neck at the nut/heel (as opposed to the width which you have given here?)

The neck is 5/8"thick at the nut and 7/8" at the heel.The finger board and spacers add about 3/8" to that. 

Hollowbelly's old red Christian Beshore 3 stringer has a very skinny neck, about 25mm wide at the nut. He's had it years and thrashed it mercilessly on many European tours - I've recently  had it in my workshop to replace the nut and it's still in fine fettle. As long as you keep a decent amount of depth in the neck you can get a very narrow neck to work. I've tapered a few necks from my usual 35mm width and rather like the feel of them.

Thanks John.  Thanks also for organising Boxstock.  My wife and I had a great time at the day event and learnt loads.  Thanks also for the supplies - most of the hardware on the guitar (to be) I got from you.  What thickness do you normally make your necks at nut and heel? 

Typically I start with a 22mm neck blank with a 6mm fretboard glued on, and usually they are are a constant depth  from nut to heel.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Fretted....

Started by Jim Codog. Last reply by Jim Codog on Wednesday. 5 Replies

Joinery suggestions for hand-made boxes

Started by Chris Wharton. Last reply by Chris Wharton on Wednesday. 42 Replies

Connecting a guitar jack?

Started by rick schoen. Last reply by David Clewell on Monday. 5 Replies

Fretting for beginners

Started by Michael Myers. Last reply by MadGomer Nov 14. 3 Replies

Adjusting the action on a cbg 3 string.

Started by rick schoen. Last reply by Tim Pannabecker Nov 11. 8 Replies

Fitting Frets

Started by neddy. Last reply by Taffy Evans Nov 10. 6 Replies

Tuner and nut question.

Started by Bill. Last reply by Gus K Nov 6. 12 Replies

Help with first tuning procedure.

Started by James Pobog. Last reply by Mark Bliss Nov 6. 3 Replies

Too far gone??

Started by T-Gripped. Last reply by Mark Bliss Nov 6. 7 Replies

Pickup query

Started by Arthur Payne. Last reply by Arthur Payne Nov 6. 11 Replies

How do I use this string tension calculator?

Started by Warren Williams. Last reply by BrianQ. Nov 4. 3 Replies

How could this be?

Started by stephen davies. Last reply by stephen davies Oct 28. 5 Replies

Is EBE tuning more tension or less?

Started by Warren Williams. Last reply by Warren Williams Oct 24. 4 Replies

Rough scarf joint seam

Started by Michael shrader. Last reply by Michael shrader Oct 23. 5 Replies

Fret sizes.

Started by neddy. Last reply by neddy Oct 18. 13 Replies

Scarf joint headstock

Started by Lou Ellis. Last reply by Taffy Evans Oct 9. 5 Replies

2 string cbg

Started by Dickie. Last reply by BrianQ. Sep 1. 5 Replies

A simple tuning peg question

Started by Warren Williams. Last reply by MadGomer Aug 26. 6 Replies

Latest Activity

Uncle John commented on Daniel Walter's photo
35 minutes ago
Uncle John commented on Dave Lynas's photo
35 minutes ago
Uncle John commented on Ben Ridgeway's photo
Thumbnail

Lil Keef

"Looks great.  The Stones played in open G and removed the big string."
36 minutes ago
Uncle John commented on Stovepipe's video
38 minutes ago
Uncle John commented on Clarky's video
38 minutes ago
Uncle John commented on 3 String Guitars's video
39 minutes ago
Uncle John commented on Downtown Vinnie's video
Thumbnail

One Drop Short of a Storm

"Yellooo, Vinnie,  Another good title and tune.  "
40 minutes ago
the anonymous pick commented on Daniel Walter's photo
Thumbnail

took more than one photo. here's another.....

"In the word's of Tommy Lee.."well.. they uhhh,,... kinda look like me ""
1 hour ago
Richard Sundberg commented on Richard Sundberg's video
Thumbnail

NEBULA

"Yeah, Uncle you should have seen my business card! I wanted to put cleaning up your mess. Actually…"
1 hour ago
Richard Sundberg commented on Richard Sundberg's video
Thumbnail

NEBULA

"Long time AD, nice to here from you! I like that line, that payback sure pays back, might steal it!…"
1 hour ago
Richard Sundberg commented on Richard Sundberg's video
Thumbnail

NEBULA

"Sometimes I just get lucky BrianQ, thank you! "
1 hour ago
KOOL DOG HOOCH replied to GARAGE HERMIT's discussion s/s lm386 draw amp,
"Good job! Looks awesome, how does it sound?"
1 hour ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->