Bob, I like that and might steal your design. One thing to consider to give it an even simpler/cleaner look is to screw it to the wall through the peg holes, and then tap the dowels in after driving in the screws. Thanks for the photo!
Came up with a simple solution. Rail made from scrappy piece of 2x1 pine and hooks from an old coat hanger. Short length of garden twine tied aroumd neck ( all i had to hand at the time)
I don't remember where I got the pins from... something else that was going in the trash... deck screws with aquarium tubing or drip line tubing works good, too... Easy Peasy...
Nearly unlimited options on this one, I'm sure you'll get some interesting feedback. On one that I gave away I simply tied a loop of old baler twine on the headstock so he could hang it on a nail.
Replies
20170717_110056.jpg
IMG_20170721_102831.jpg
Excuse the decor - i'm in the process of redecorating.
2x4, Superglue, twine, tool storage hooks, screws, Imagination.
I don't remember where I got the pins from... something else that was going in the trash... deck screws with aquarium tubing or drip line tubing works good, too... Easy Peasy...