I have built my first couple of cbgs one is set up with GDG the other is EBE. The frets I used were on eBay 2.2mm. I am fine playing the single finger chords on the thinner strings EBE. But have trouble with the GBG set up due to the thicker strings. The height of the frets are only 1.00 mm. Would changing frets to jumbo size eg 2.90 mm which are higher solve my problem thanks ned

Views: 115

Replies to This Discussion

Maybe you could supply some pics? It may be just a set up issue, hard without a visual?

Sounds like you have it set up with E,A,D strings? I recommend A,D,G strings for GDG tuning? You’ll have less tension on the bigger string since you’re tuning it down a whole step to G? If the big string is an E, then you’re tuning it up a step & a half to G, that’s where that tension is coming from? 

String sizes messured with venier callipers low G .047inch. D string .031 inch G string 019 inch not sure how to add pictures.

how long have you been playing? were you a guitar player before you started on CBG ?

fret size shouldn't make that much of a difference in your ability to play a guitar. if you

are new to playing guitars in general, give yourself time to be able to play properly.

just keep playing and it will come.

Yes, I agree with Slim, I’m playing a cbg with string tie frets, which are way lower than 2mm with no problems? Here’s how to post a pic, like I said, it might be a set up issue? You might want to check out one of the action set up videos over at Glenn Watt & Del Puckett YouTube channel? 


My frets are only 1mm high. I can't get a page up resembling the one shown I am only using my phone for internet.

I’m also using a phone? Screen is same for me whether iOS or Android? You may try refreshing the page? Is your action high above the frets, that might be your problem, that’s why I prompted a pic, usually easier to spot the problem if we can see it? 

I set my hieght of strings using playing cards 3 cards at nut fret and 7cards at 12th fret.

Doesn’t look like the action is too high, but the strings look like they’re in a little deep in the nut? I like to put some back angle on my necks when I’m using a fretboard, it makes a world of difference? Maybe it’s just a case of beginners hands, keep playing & see if it gets better? If not then maybe it is a set up issue, I’ve gone back through a few of my early cbgs a few times to get em set right? Hope you figure things out :)

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Fretted....

Started by Jim Codog. Last reply by Jim Codog yesterday. 5 Replies

Joinery suggestions for hand-made boxes

Started by Chris Wharton. Last reply by Chris Wharton yesterday. 42 Replies

Connecting a guitar jack?

Started by rick schoen. Last reply by David Clewell on Monday. 5 Replies

Fretting for beginners

Started by Michael Myers. Last reply by MadGomer Nov 14. 3 Replies

Adjusting the action on a cbg 3 string.

Started by rick schoen. Last reply by Tim Pannabecker Nov 11. 8 Replies

Fitting Frets

Started by neddy. Last reply by Taffy Evans Nov 10. 6 Replies

Tuner and nut question.

Started by Bill. Last reply by Gus K Nov 6. 12 Replies

Help with first tuning procedure.

Started by James Pobog. Last reply by Mark Bliss Nov 6. 3 Replies

Too far gone??

Started by T-Gripped. Last reply by Mark Bliss Nov 6. 7 Replies

Pickup query

Started by Arthur Payne. Last reply by Arthur Payne Nov 6. 11 Replies

How do I use this string tension calculator?

Started by Warren Williams. Last reply by BrianQ. Nov 4. 3 Replies

How could this be?

Started by stephen davies. Last reply by stephen davies Oct 28. 5 Replies

Is EBE tuning more tension or less?

Started by Warren Williams. Last reply by Warren Williams Oct 24. 4 Replies

Rough scarf joint seam

Started by Michael shrader. Last reply by Michael shrader Oct 23. 5 Replies

Fret sizes.

Started by neddy. Last reply by neddy Oct 18. 13 Replies

Scarf joint headstock

Started by Lou Ellis. Last reply by Taffy Evans Oct 9. 5 Replies

2 string cbg

Started by Dickie. Last reply by BrianQ. Sep 1. 5 Replies

A simple tuning peg question

Started by Warren Williams. Last reply by MadGomer Aug 26. 6 Replies

Latest Activity

the anonymous pick commented on Richard Sundberg's video
Thumbnail

NEBULA

"yup"
43 minutes ago
the anonymous pick commented on Uncle John's photo
Thumbnail

Painless dentist for Dave Lynas

"dang .. Daniel  used my  "tooth hurty" joke already :-( "
48 minutes ago
Stovepipe posted a video
50 minutes ago
the anonymous pick commented on Shane Speal shanespeal.com's group Introduce Yourself!
"Awesome story  John B ;-) thanx  for the inspiring  share , and welcome  to the…"
52 minutes ago
BrianQ. replied to James Pobog's discussion Question about pre-amps
"Have you tested the tubes?"
58 minutes ago
Uncle John commented on Uncle John's photo
Thumbnail

Muddy's Place

"It does look salvageable."
1 hour ago
Uncle John commented on Uncle John's photo
Thumbnail

Painless dentist for Dave Lynas

"Good one, Daniel. Gonna steal it."
1 hour ago
Uncle John commented on Daniel Walter's photo
Thumbnail

Uncle John waiting for the train.........

"Where is my Marlboro? Oh, that's right- I don't smoke. I wish I was long legged and lean…"
1 hour ago
Uncle John commented on Daniel Walter's photo
Thumbnail

Uncle John waiting for the train.........

"Where is my Marboro? Oh, that's right- I don't smoke. I wish I was long legged and lean…"
1 hour ago
Uncle John commented on Dave Lynas's photo
Thumbnail

Old Timer and the new guy Omar

"Great looking build and pickup.  Dave did they name the pick up for you?   Nice one…"
1 hour ago
GARAGE HERMIT posted a discussion

s/s lm386 draw amp,

amp cab i made from an old 1940/50's draw, speaker is an old FANE 15 ohm, amp is a simple lm386…See More
1 hour ago
Uncle John commented on Richard Sundberg's video
Thumbnail

NEBULA

"Yes, pretty much magical to see and hear.  Good magic.  "
1 hour ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->