I find it's easier to precut to length and shape ends of frets before putting them in the slots. I have also been using a hacksaw to cut the slots. I use a piece of square 1 1/2inch steel tube which I clamp on top of the frets. This ensures that all the frets are level on the flat surface of the fret board. Then I put a drop of super glue on end of each fret. This works for me.

Views: 168

Replies to This Discussion

So using the hacksaw, you are basically dropping the finished frets into place rather than hammering them I assume? Curious what type of blade you use.

The fret tongue measure 0.6mm in thickness with the Barb's it goes to 1.1mm. The thickness hacksaw blade on a standard hacksaw is 0.9mm. The frets will grip when using this blade. But I also use a drop of super glue on ends. I also have a mini hacksaw which has a blade thickness of 0.7mm this is a tight fit. This is fiddley to use but works well.

This is what I use

Attachments:

If you use a fretting saw, you won’t need glue? I know this works for you, but I don’t recommend using a blade with potential to warp for cutting fret slots, fretting saws have more rigidity than hacksaw blades do & make tighter cuts, but to each his own? 

I'd suggest an economy grade fret saw, with the proper blade thickness, would be one of those things you wish you had gotten far sooner once you use it.

It is also very simple to create a basic miter box that both guides your cut, and controls the depth of cut.

All that said, you may find it necessary to use glue in softer woods. 

And pre-cutting is doable as you have discovered. But with a good sharp set of wire cutters and a good quality file, I can trim and bevel a set of freshly installed frets in about ten minutes. Its the optional detailing from there that takes time!

This guy likes his glue.


Hi Gus, I think what he says makes a lot of sense. I have been gluing my frets in since around the late 1970's. Some Customers actually comment on how much better their guitars sound after a refret, so l keep ding it.

I use Titebond and run a bead of glue along the bottom of the fret tang, otherwise the same as in the video. I do refrets and new fret installations the same.

Taff

Hi Neddy, Brian Q and Mark B offer good advice there. I have been through the finding the correct saw dilemma, many, many years ago, and have many, many saws to show for it. Even filing the set of the teeth down to get a good fit. Its hard to beat the saw made for the job. You can use it for other tasks but I keep mine for just fretting only.

You need a stable saw as Brian mentions, and a "back saw" gives you that. Shown in the photo is what I mean. If you feel happy using the hacksaw blade you could make it into a back saw, as also shown in the photo. But does not give much room for slot depth control devise.

A good fit is essential. Fingerboards are not normally protected from the elements with lacquer or varnish so are susceptible to movement, this can cause frets to come lose. I would imagine that loose fitting frets can  allow a neck/fingerboard to bow up more easily under string tension, the same as too tight fitting frets can bow a neck back as they are tapped in.

Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
14 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
14 hours ago
Kent Thurston updated their profile
15 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
15 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
15 hours ago
Poorness Studios liked A.D.EKER's video
17 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
18 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
20 hours ago
A.D.EKER commented on A.D.EKER's video
23 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->