Replies to This Discussion

Permalink Reply by Marty O on June 23, 2013 at 9:34pm

From what I can see from all the details at CBGitty I would say yes. I use a 25 inch (635 mm) scale length and this works fine with these boxes that are advertised. I also make my whole neck length about 900 mm in length (this allows me to cut off any excess if required) which is a little under what CBGitty is selling so again I see no problems and both kits should work fine together. Just remember to make sure your bridge sits nicely towards the back of the cigar box before cutting any timber.

Cheers

Marty

Permalink Reply by Tim LaFave on June 24, 2013 at 3:12am

If I understand your question; in all my builds each neck is custom-built for each box, because boxes came in all sizes.The only time I think it would be different is if you were building multiple guitars from the exact same sized boxes.