How much of the capstan should protrude above the headstock once the tuning peg is installed? I've been googling all afternoon but have been unable to find this simple piece of information.

The thickness of my headstock will obviously be determined by this measurement. There is obviously a standard size tuning peg but I've no idea if mine are standard or not.

My tuning pegs have the following measurements:

Overall length of capstan measured from back plate: 27.5mm (1 3/32")

Distance of center of hole from back plate: 23.5mm (30/32")

Many thanks for your help,

WW :)

Views: 75

Replies to This Discussion

I usually go about 1/2 inch above the headstock, or the ferrule if one is used. Art

I'm not able to measure mine right now but I make my headstock 5/8" thick and always have plenty of peg protruding even when I use bushings on top.

Hi Warren, usually the peghead is 15mm thick on guitars. This will take the rotomatic [enclosed] style tuners. Some open back tuners have a longer post and some CBG's have thinner pegheads, so I would keep in mind the break angle of the string off of or over the nut as well as the height of the post hole above the peghead face.

If the hole is too high then the string may not have the desired angle from the nut. I try to keep the hole about 1/4 above the peghead face, this give enough room for a few winds of a wound string. I often put a veneer of suitable thickness on the back of the peghead to regulate the amount of post protruding out front.

Taff 

Hi,   Like the previous answer, I applied veneer to both sides of the machine head, then, like a twerp, I realised that the tuners would not protrude enough. So, I ended up Dremel routing each tuner base by an 1/8th" on the back side, a bit of a job, but it worked. I now have 5/16th" protruding, and that is fine, certainly enough for the average string sizes... this measurement is taken from the locking nut, out to the end of the peg.

OK thanks for your replies everyone. As usual there doesn't seem to be an exact answer so I will 'eyeball' it and try to use a sensible height based on the angle of my strings coming off the nut.

Such is my approach to life!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

2 string cbg

Started by Dickie. Last reply by BrianQ. Sep 1. 5 Replies

A simple tuning peg question

Started by Warren Williams. Last reply by MadGomer Aug 26. 6 Replies

How could this be?

Started by stephen davies. Last reply by stephen davies Jul 9. 2 Replies

Grounding

Started by Robert M J Loftus. Last reply by stephen davies Jun 30. 6 Replies

Pickup Placement on High G Ukulele

Started by Chris Sturhann. Last reply by Chris Sturhann Jun 19. 2 Replies

Shipping

Started by Virginia Bill. Last reply by Jim Brown Jun 12. 4 Replies

Neck Bowing?

Started by Craig Cole. Last reply by Craig Cole Jun 11. 11 Replies

Springs in an acoustic cbg

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Will "KOOL DOG HOOCH" Bonner Jun 1. 8 Replies

Weird Little Install Issue

Started by Craig Cole. Last reply by Craig Cole Jun 1. 5 Replies

CBGitty Amp kit

Started by Art Prior. Last reply by Paul Craig May 31. 4 Replies

Earthing Strings

Started by mitch jones. Last reply by mitch jones May 18. 7 Replies

Like a box of chocolates

Started by Michael shrader. Last reply by Michael shrader May 11. 3 Replies

Intonation problem

Started by Ramson. Last reply by Will "KOOL DOG HOOCH" Bonner May 3. 14 Replies

Pure and simple CBG

Started by Bill McNamara. Last reply by Craig Cole Apr 30. 6 Replies

Scale length for 17" box

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Dennis "Denbo" Goodinson Apr 30. 29 Replies

Pickup to string distance

Started by Lou Ellis. Last reply by Lou Ellis Apr 9. 8 Replies

What strings should be used for 4 string cbc tuned to GDGD?

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Paul Craig Apr 8. 3 Replies

Bonehead rookie mistake

Started by Michael shrader. Last reply by Will "KOOL DOG HOOCH" Bonner Apr 7. 24 Replies

Neck, sound hole, strings and Bridge question.

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Will "KOOL DOG HOOCH" Bonner Apr 4. 9 Replies

Blog Posts

So...

Posted by Emer M. on September 16, 2019 at 11:59am 0 Comments

Mama Pearson's Soaporium

Posted by Rick Tish on September 14, 2019 at 8:52pm 0 Comments

Fresh Diddley Bow- "Why Not?"

Posted by Glenn Kaiser on September 13, 2019 at 10:23pm 1 Comment

Good weekend selling

Posted by Rick Tish on September 11, 2019 at 10:13pm 1 Comment

Cigar Box Guitar Music - Old time Blues

Posted by John on September 9, 2019 at 6:00pm 2 Comments

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->