Here are some pictures of the solid body electric uke I just finished. 1.5 inch thick mahogany body and hard maple neck with maple finger board. Bridge plate is made of brass with strat hard tail saddles mounted on it. the pickup is homemade and similar in design to a P-90 ( http://www.stewmac.com/tsarchive/ts0036.html ).
You need to be a member of Cigar Box Nation to add comments!
Replies
Here is a video of the Micro Tele being played
https://www.youtube.com/watch?v=3TLNjNkrNBU&list=PLtoSu0AG0bNZXK...
Hey Bruce - Just curious - what's the size / scale length on the one you just finished? Is that a baritone? Thanks! Will
they are both concert scale 15 1/8 inch with low G tuning. Thanks for checking them out
Great job. Several folks on Ukulele Underground would love one of those
Might see some of them this week around Atlanta. Taking one to an open mic on Thurs then to Uke Republic get together on Sat. Thanks for checking them out..
Just finished another one. A little better than the last one.
DSCF0902.JPG
DSCF0900.JPG
That's awesome... you did a great job with that! Did you use a plan for that, and if so, can I get a copy of it? I'd love to make one myself. Thanks!
Will, I just drew up my own plan for this using some measurement from a friends acoustic ukulele. I used the stewmac fret calc. to lay out the neck.
This is awesome! Excellent job! I am going to have to try winding my own pick-up, now. Thanks for the incentive.
Very nice work, Bruce. Cute little axe
-
1
-
2
of 2 Next