Posted by Brian Revels on March 9, 2016 at 10:09pm
So I am in the middle of my fanciest build yet. I am following Ted's diagram for two pickups (in my case a telecaster pup and a piezo disc), a 3 way toggle switch, a volume pot, and a jack. I see in his diagram that I need to wire all the negatives together, and then have one lead off to ground to the bridge.
I had a friend tell me to make a bridge and wire all the wires to it, but I still have a lot to learn and thought to ask here.
Also, how do most ground to the bridge?
Btw... I meant to mention that I will either be using a gold painted bolt for the bridge or a wooden bridge with a pop rivet pin for the strings to run over top.
Replies