Hi folks.

Just trying to get my head around pickups and wondering about the benefits of a three-string guitar using a three pole pickup. Am I wrong in believing that each pole of a pickup reads to the side too? Do strings HAVE TO run dead centre of the poles? What happens if they don't and is it/why is it better if they do? What about rail type pickups? How do they differ from the others? Are they generally better or worse? Genuinely just trying to learn.


Views: 1116

Replies to This Discussion

Those are cool as cool beans, Wayfinder. Thanks for explaining it all to me. T'internet truly is a marvellous thing for learning as you just rightly said. Marvellous.
Hi Dani, the single pole pickup is an Elmar "Bug". He's a great pickup maker from Austria. He makes Flatpups. They lay flat on the guitar top. You don't have to cut a big hole in the guitar top to install a Flatpup. Also have a single pole from JuJu, another pup wizard.
While searching the blog about using a 6 string pu on a 4 string cigar box, I found this post...
Don't want to bug anybody, but the way I always described pickups was being a single coil or a double coil (humbucker), each coil having 6 poles, or rails, etc...
I am getting prepared for my first CBG and was wondering if it was worth it making a 4 pole pu, except for the look.
I am still not sure though???

CBGitty has 3 and 4 pole single coil pickups for CBG's and others(including myself) have use the PBass 4pole singles that are wired together in series for CBG's. It's okay to use the 6 poles pickups as long as you get some poles under the strings.

The poles extend the magnetic field up at certain points so you can theoretically increase the volume of each string individually.

Blade type pickups extend he magnetic field across a linear path so that all the stings in any position will cross through the field.

It can be problematic using pickups with poles, try to get your strings to match up with them for volume or even in equidistant between them (not as loud but still volume ballanced) by try to avoid having some strings over them and some to the side.

Two fixes.. Turn the pickup so that it is at an angle or you can put a flat piece of metal over the top of the poles to produce the same as a blade pickup.

Thanks again Fomhorach. I'd forgotten about this thread but great that you brought it back to my attention. I've seen two single coils with a humbucker pre-wired to a selector switch and pots for a really great price on eBay. Knowing this and the help you gave on the other thread will really help should I go for that option. As always, much appreciated. 

If this is for a typical Strat type guitar they can be s great buy. Most of these have the 2 single coils at 5k to 5.5k and 10k to 12k for the double coil. I've seen them on Amazon for as little as 10 bucks, but mostly unheard of brand names. However they are most likely all made by the same company in China.

Great price if you can get them for $10! The ones I've seen are £17 but from a guy I've bought from a few times already and I've always been really happy in the past. A good experience goes a massive way to bringing customers back over and over. The peace of mind is worth a cash amount in itself. Not sure what the amount is that it's worth but it does go a long way. Thanks for helping out again :) 

I tell you something I did with a set of these pickups. The  double coil pickup in the bridge sounded great, but the neck and middle singles measured 5k for neck and 5.5k for middle were a little dull. So I wired the 2 singles together in series as a humbucker and put a 3-way switch in place of the 5-way switch. those 2 pups made one of the best sounding neck humbuckers I've ever heard.

Another way is to do a series/parallel switch for the neck and middle so you can do both the original wiring or switch to series when you want it. It gives your git an extra punch.

I'll have to see if I can find a wiring diagram for how to do that. Sounds complicated but a definite option. Thanks for the advice Paul. Awesome stuff going on in here lately.

They didn't label the pups. Far right is the neck pup. uses a 2DPT switch on/on with 6 contacts(3 sets of 2) on the bottom.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Output method

Started by Holly Hodson. Last reply by KOOL DOG HOOCH Sep 22. 5 Replies

Creackle from Volume and Tone pots

Started by Arthur Payne. Last reply by KOOL DOG HOOCH Sep 22. 4 Replies

Dealing with hum...

Started by James Pobog. Last reply by KOOL DOG HOOCH Sep 22. 6 Replies

Copper foil tape as shield.

Started by Arthur Payne. Last reply by Arthur Payne May 2. 5 Replies

Why have a switch?

Started by Arthur Payne. Last reply by ILL GREEN Apr 12. 3 Replies

Problem with second-hand amp.

Started by Arthur Payne. Last reply by Arthur Payne Apr 2. 5 Replies

Added the CB Gitty “Psycho Knob”

Started by Tim Pannabecker. Last reply by Paul Craig Mar 8. 16 Replies

Lipstick pickup and Telecaster neck pickup. What goes where?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Slow Blues Dani & Ol' Grey Bear Mar 1. 12 Replies

Wiring CB Gitty Black Ice Single Coil

Started by ILL GREEN. Last reply by ILL GREEN Jan 9. 5 Replies

Minimal effect from volume or tone pot

Started by Arthur Payne. Last reply by Paul Craig Dec 21, 2018. 9 Replies

Problem posting discussion

Started by Arthur Payne. Last reply by Paul Craig Dec 17, 2018. 2 Replies

Vol, tone, 3 way toggle and 2 single coils?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Paul Craig Nov 25, 2018. 20 Replies

two picksups - both or separate

Started by Reynhard Boegl. Last reply by Reynhard Boegl Sep 27, 2017. 8 Replies

Psycho knob

Started by bizzaro guitaro. Last reply by bizzaro guitaro Sep 19, 2017. 4 Replies

Psycho knob install

Started by bizzaro guitaro. Last reply by bizzaro guitaro Sep 19, 2017. 13 Replies

Psycho knob

Started by bizzaro guitaro Sep 18, 2017. 0 Replies

I cheated and bought a solderless wiring harness. Naughty boy!

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Slow Blues Dani & Ol' Grey Bear Aug 18, 2017. 46 Replies


Started by Rose Ericson. Last reply by Rose Ericson Jul 8, 2017. 2 Replies

Wiring A Dual Rail Pickup into A Cbg

Started by Philip Hale. Last reply by Paul Craig Jun 2, 2017. 5 Replies

Latest Activity

Dave Lynas liked 3 String Guitars's video
7 minutes ago
Uncle John commented on Uncle John's video

Two Dollar Bill ~ Traditional

"Thanks, AGP.   That Billy Strings is great.  I am going to go look for his…"
7 minutes ago
Dave Lynas commented on Dave Lynas's video

The Goat goes Electric

"I don’t know why either AGP. MAYBE THE LEAD is getting to me. Here I am making knobs for…"
13 minutes ago
Tom E liked Brian E. Paulson's photo
18 minutes ago
Tom E liked Dan's photo
19 minutes ago
Tom E liked Bill Turner (Wunkyman)'s photo
20 minutes ago
AGP # commented on Uncle John's photo

Two Dollar Bill

"And a fine year it was to be born in!  :-D"
21 minutes ago
AGP # liked Uncle John's photo
23 minutes ago
Tom E liked David Pfeiffer's photo
23 minutes ago
AGP # liked Rich's photo
23 minutes ago
Tom E liked 3 String Guitars's photo
23 minutes ago
Tom E liked Rich's photo
24 minutes ago



© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->