It was suggested to me that one of my designs might benefit from a built in speaker, so I had a couple of questions about how to go about it.

For starters, I was thinking about breaking apart and rehousing one of those mini amps you see on ebay, but I'm aware that practically speaking, this may be difficult. So first question I guess would be:

Break apart and rehouse a mini amp OR wire up individual components - which is the best (not necessarily easiest) move?

Next, the mini amp got me thinking about the actual output. Obviously the primary output would be the speaker, but they also come with a headphone jack, so I guess secondary output would be headphones. Which leads me to wonder about times when I need more volume, so two more questions spring to mind:

1. Can you plug in to a headphone jack and run it into a bigger amp?

2. If not, can you wire something up to  use the speaker/headphones when the speaker is turned on and bypass the speaker when the speaker is off, and output to an external amp instead, and if so, how?

And on a related not, is there any point in wiring the (mag) pickup to volume and tone knobs and then wiring that to a speaker with volume and tone knobs? Could I (or indeed should I) just cut out the amp controls altogether?

And while I'm on the subject, if I build my own circuit (as opposed to ripping apart a mini amp), how can I put in an overdrive option like the amp has - assuming it can be done at all!

Sorry for the question spam!

Views: 173

Replies to This Discussion

I have a kids electric 6 string with built in amp and speaker and output for an external amplifier. I was going to try to get it playing, but it will never play in tune, so it's just gathering dust

I'll PM you

Denis

Now that's a point, I forgot about those things! Guess that proves its possible!

Shit, old thread.  In honor of our sponsor, I'll first suggest a (now) $37 speaker kit from CBGitty. "Great 2.5-watt Parts-Only Cigar Box Guitar Amplifier Kit". They also have 2 "cigar box" speaker kits for about $50 Maybe you can use the extra parts for builds.

I recently received a "TrashAmp" a mp3/guitar amp ($40). It's fun to experiment with different sized glass jars (just has to have a Mason/Ball jar type lid top)  It has two "headphone" outlets, one for input, another for output so they can be "daisy chained". I suppose with an adapter I could plug it into a full-sized amp, too. But I'm suggesting kits rather than tearing apart mini-amps because of capacitors and other circuitry in the amps. Personally I know a minimal amount about these components and on a pre-made amp, I'd have to worry about identifying them and/or diagnosing what including them and excluding them might do. A kit is going to at least identify these (you may have to do some searching for actual functions). worth a few extra bucks I think. 

There's now an article about capacitors on CBGitty https://www.cbgitty.com/news/electronics-pickup-harness-disk-piezo-...  I just found it and it's absolutely going to be put into a CBG or two I have that presently go straight from piezo to connector outlet.

You may want to checkout Guitar Fuel, they sell on EBay and sell a good product.  There are several 3watt and a 5watt option. They also include an effects knob, which offers gain, overdrive, music styles effects.

Gitty has a great 2.5 prewired amp harness.  And they sell an effects board called “psych knob”, which is an Artec QDD board, also prewired.  I’m sure there are more, but I haven’t used them so no Referal.

i have used all the above in amps or guitars.

last recommendation, get a bigger better speaker.  A good speaker will cost more than the Gitty amp.  But you could get a nice one for $20-$30.  

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Output method

Started by Holly Hodson. Last reply by Tim Pannabecker May 13. 4 Replies

Copper foil tape as shield.

Started by Arthur Payne. Last reply by Arthur Payne May 2. 5 Replies

Why have a switch?

Started by Arthur Payne. Last reply by ILL GREEN Apr 12. 3 Replies

Problem with second-hand amp.

Started by Arthur Payne. Last reply by Arthur Payne Apr 2. 5 Replies

Added the CB Gitty “Psycho Knob”

Started by Tim Pannabecker. Last reply by Paul Craig Mar 8. 16 Replies

Lipstick pickup and Telecaster neck pickup. What goes where?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Slow Blues Dani & Ol' Grey Bear Mar 1. 12 Replies

Wiring CB Gitty Black Ice Single Coil

Started by ILL GREEN. Last reply by ILL GREEN Jan 9. 5 Replies

Minimal effect from volume or tone pot

Started by Arthur Payne. Last reply by Paul Craig Dec 21, 2018. 9 Replies

Problem posting discussion

Started by Arthur Payne. Last reply by Paul Craig Dec 17, 2018. 2 Replies

Creackle from Volume and Tone pots

Started by Arthur Payne. Last reply by Arthur Payne Nov 27, 2018. 3 Replies

Vol, tone, 3 way toggle and 2 single coils?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Paul Craig Nov 25, 2018. 20 Replies

two picksups - both or separate

Started by Reynhard Boegl. Last reply by Reynhard Boegl Sep 27, 2017. 8 Replies

Psycho knob

Started by bizzaro guitaro. Last reply by bizzaro guitaro Sep 19, 2017. 4 Replies

Psycho knob install

Started by bizzaro guitaro. Last reply by bizzaro guitaro Sep 19, 2017. 13 Replies

Psycho knob

Started by bizzaro guitaro Sep 18, 2017. 0 Replies

I cheated and bought a solderless wiring harness. Naughty boy!

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Slow Blues Dani & Ol' Grey Bear Aug 18, 2017. 46 Replies

Capacitor

Started by Rose Ericson. Last reply by Rose Ericson Jul 8, 2017. 2 Replies

Wiring A Dual Rail Pickup into A Cbg

Started by Philip Hale. Last reply by Paul Craig Jun 2, 2017. 5 Replies

Buzz or maybe humm

Started by Rose Ericson. Last reply by Paul Craig Mar 12, 2017. 8 Replies

Blog Posts

Shellac

Posted by Rick Tish on August 15, 2019 at 7:08pm 0 Comments

first post

Posted by Rick Tish on August 14, 2019 at 8:23am 0 Comments

My first

Posted by Myron Joe Hickel on August 11, 2019 at 9:13pm 5 Comments

Latest Activity

Duane M replied to Clint Spotts's discussion Spring Reverb Advice
"Lowes is where I found my springs. You'll need 1.5lbs tension. I've done 5 or 6 and this…"
24 minutes ago
Denny liked Steve Holladay's video
51 minutes ago
Robbie posted a discussion

Phsyco Knob wiring

Ok. I want to build a guitar with a piezo and a mag pick up using this system. Anyone wire one of…See More
1 hour ago
Uncle John commented on Poorness Studios's photo
Thumbnail

Started my second CB Gitty kit

"Hmm.  I don't recall mine having the center braces with cutouts."
1 hour ago
Uncle John commented on Poorness Studios's photo
Thumbnail

Started my second CB Gitty kit

"Yup, light and strong.  I have one, but have not built with it.  I don't like the…"
1 hour ago
Uncle John commented on JD's video
Thumbnail

cb sitar

"It does.  Nice woody tone and volume at the same time."
1 hour ago
Uncle John commented on BUGGY (C)'s video
Thumbnail

She used to be so beautiful

"This one is fun, but sadly true.   Great skiffling sound, Buggy.  I like that so…"
1 hour ago
Uncle John commented on Dave Lynas's video
Thumbnail

Green Fields of Virginia

"Cello sounds so good in the background.   Nice, nice Dave.  It's old timey…"
1 hour ago
Uncle John commented on Uncle John's video
Thumbnail

Poor Man ~ Traditional Old Song

"Thanks, Dave.  Thanks Danny.  Harps are expensive and that sounds like a good buy. "
1 hour ago
Will "KOOL DOG HOOCH" Bonner replied to Clint Spotts's discussion Spring Reverb Advice
"Disc Piezo will pick up a nat farting on your CBG! They are basically a microphone/speaker. As a…"
3 hours ago
jala commented on Derek Rose's video
Thumbnail

Some Kind of Fantasy

"Hello derec  Always simple and sweet song make for your voice  Beautiful Joe "
3 hours ago
BUGGY (C) left a comment for BUGGY (C)
5 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->