And here is the box and shots of the dowel-through.  It will be screwed closed, thus the screwing blocks along the sides.

 

Views: 1549

Replies to This Discussion

I was planning on using the same approach with a removable back, similar to my guitars.  How do you install the soundpost and get it to stay in place?

I cut it to fit really really tight, and then held it in place with a drop of crazy glue on the underside of the lid.  You have to be really sure where the bridge is going to go, and the soundpost goes just tail-wards of the treble foot of the bridge.  You can't fit it after assembly like on a standard fiddle, because the top and back are not arched, so you have to go the non-standard, luthier-cringing, way.

Another question Diane...  How precise did you have to be when determining the height of neck where it enters the box with respect to the top of the instrument.  I'm thinking in terms of the bridge, which is sitting on top of a flat surface instead of the rounded surface of a typical fiddle.  The curvature adds at least 1/4 inch to the thickness of the instrument, so does that mean the bottom edge of the fingerboard above the top of the fiddle has to be approx 1/4 inch less than normal?  Or, do you allow yourself the freedom of adjusting the bridge height?

Dave, on that instrument there is very little clearance between fingerboard and top at that neck join. On a standard fiddle is it not quite 1/4".  I was able to use a fairly standard bridge, but I got a "tall" one so I had plenty of carving room to get the size I needed. So yes, I was able to compensate for the lack of belly height by lowering the neck relative to the body.

This was a while ago and my recall about these sorts of things gets fuzzy pretty quickly.

Great building pics Diane! The hint with 8° inclination is super, it helped me a lot for my first violins. I didn't use the dowel, instead I reinforced the sides lengthwise (I used wooden rulers from beech). The back (1/5") itself seems to fulfill the same function as the dowel.

I'm happy this group exists, thanks for all the interesting hints.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Bow for cigar box fiddle

Started by Phil Thomas. Last reply by Phil Thomas May 23, 2017. 2 Replies

My First Cigar Box Fiddle

Started by Tim LaFave. Last reply by Alan Hawkins Mar 4, 2016. 7 Replies

Pochette build

Started by Jaber. Last reply by Jaber Jan 20, 2016. 2 Replies

First cigar box fiddle

Started by Slow Slough Guitars Dec 22, 2014. 0 Replies

First "cello" build

Started by Jaber. Last reply by Jaber Apr 26, 2014. 7 Replies

Building the "Stumpwater" fiddle

Started by Al Lyons. Last reply by Gipson Fat Fingers Shoemaker Feb 7, 2014. 29 Replies

Bass

Started by Redbelly. Last reply by Reeds Taylor Sep 21, 2013. 3 Replies

how to add an adjustable shoulder rest?

Started by Paul Cooper. Last reply by Paul Cooper Aug 29, 2013. 6 Replies

Tremendous online violin making site!

Started by Diane in Chicago Jun 15, 2013. 0 Replies

"Tips on How I Build a CB Fiddle"

Started by Tim LaFave. Last reply by Tim LaFave May 25, 2013. 4 Replies

Newbie from Asheville, NC

Started by Al Lyons. Last reply by Diane in Chicago Jan 10, 2013. 2 Replies

Little travel fiddle

Started by Diane in Chicago. Last reply by Diane in Chicago Jan 9, 2013. 9 Replies

3/4 Ohio fiddle

Started by the cigarbox table guy. Last reply by Yellowbelly Flatt Dec 30, 2012. 5 Replies

some violin pics

Started by Elmar Zeilhofer. Last reply by CrocBite May 22, 2012. 4 Replies

CB Fiddle #2 and furthermore

Started by Diane in Chicago. Last reply by Elmar Zeilhofer May 21, 2012. 18 Replies

My first attemp at a cigar box fiddle. :-)

Started by Rick Hunt. Last reply by Rick Hunt Mar 18, 2012. 23 Replies

How to take a fiddle apart?

Started by Dave Onastik. Last reply by Diane in Chicago Mar 13, 2012. 5 Replies

Build Update

Started by Bobby Wallen. Last reply by Order99 Mar 3, 2012. 5 Replies

First time build and I have a few questions

Started by Bobby Wallen. Last reply by Tristan Chambers Feb 22, 2012. 2 Replies

Latest Activity

BrianQ. liked Gary O'slide's video
5 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Flathead Diddley Bow

"Thanks. Wow! That becomes a spendy box Alan. They are pretty distinctive though. I have a few on…"
9 hours ago
Nigel McTrustry posted a video

Nigel McTrustry & The Hound Dogs are Loose! - Yellow Dog - Live - Original - Cigar Box Guitar

Nigel McTrustry & The Hound Dogs are Loose! Yellow Dog (McTrustry)@ The Cave Inn Brisbane, Australia.The song is currently on Spotify.
9 hours ago
AGP # commented on Doug Thorsvik's photo
Thumbnail

Flathead Diddley Bow

""Sweet Doug" :-), have seen quite a few Flathead Builds over the years, great looking…"
12 hours ago
AGP # liked David Dodt's photo
12 hours ago
AGP # liked David Dodt's photo
12 hours ago
AGP # liked David Dodt's photo
12 hours ago
AGP # liked Doug Thorsvik's photo
12 hours ago
AGP # liked Doug Thorsvik's photo
12 hours ago
AGP # liked Doug Thorsvik's photo
12 hours ago
AGP # liked Aaron Green's photo
12 hours ago
Keith Rearick liked Gary O'slide's video
13 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->