How is intonation on a canjo adjusted?  On a CBG you string it up, tune it, check the 0 & 12 frets and adjust the saddle till intonation is correct.

With a canjo where the string is anchored in the end of the can, you have to punch holes in the can to mount it,  string it up and check the tuning, find its off, and then .... ???

how do you adjust it after putting the mounting holes in the can?

Views: 456

Replies to This Discussion

I'm still tinkering with finding a good design, but the one I made and am trying to play has the can bolted on with a wing nut so I can make fine-tuning adjustments of the can. This is roughly equivalent to tweaking the bridge saddle. (Hey, I didn't say I had it all figured out yet.)

So far, so good. Just a working prototype I made to try to learn to play.

I put the open end of the can pointed away from the headstock so the entire sounding length of the string is exposed. That makes it easier to pluck near the "bridge" and easier to see where the "bridge" is in relation to the frets. But it does make the can label read upside down, and some don't like the look.

The real trick is to convince the wife to open cans upside down.

with a hair dryer you can soften the glue, remove the label, and put it on other-way-around while the glue is still warm.

Thanks. So obvious when you think about it...

The smart assistance answer is measure accurately and build it right in the first place. A more helpful answer is reattach the can to correct the intonation. The cool thing about can Joe's is that once you get it right you can burn through multiple copies in no time.

Good point

rethought the question about intonation.  Assuming you have action about right... string it up BEFORE fretting.  Use slide to find the 12th fret (equivalent) ... back figure scale length and lay out frets accordingly.

that what I've done converting CBGs fretless to fretted.  why not this?.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Can Cutting

Started by Mike Whisenhunt. Last reply by Adam Jellison Oct 7. 8 Replies

The Gas/Kerosene/Oil Can variety: a community image bank

Started by Diane in Chicago. Last reply by James Conder Nov 5, 2018. 7 Replies

The Cookie Tin Variety: a community image bank

Started by Diane in Chicago. Last reply by Brown Water Jerry (Rice) Aug 17, 2018. 34 Replies

How to adjust Intonation???

Started by JL. Last reply by Wichita Sam Mar 10, 2017. 9 Replies

1st Electric Canjo Build

Started by Greg Thompson. Last reply by TN Twang Aug 20, 2016. 4 Replies

Reds Wicked Apple canjo

Started by Greg Thompson. Last reply by TN Twang Aug 14, 2016. 8 Replies

Chromatic fretting.

Started by Graham Alibone. Last reply by Graham Alibone Sep 15, 2015. 6 Replies

Gunpowder Jug Resonator

Started by David Harris. Last reply by Greg Thompson Nov 27, 2014. 1 Reply

Can Jo for Children

Started by David Bowes. Last reply by David Bowes Sep 29, 2014. 11 Replies

Strings: Materials, Techniques, Sound, Etc.

Started by Dustan Eichler. Last reply by TN Twang Jun 13, 2014. 23 Replies

Circular hole tuner design

Started by Philip Daniel. Last reply by Rand Moore Apr 4, 2014. 10 Replies

cookie tin banjo (tinjo)

Started by Hillbilly Hobo. Last reply by Rand Moore Apr 4, 2014. 1 Reply

mag pup

Started by jabes. Last reply by jabes Mar 25, 2014. 2 Replies

Overthinking a simple cookie tin ?

Started by Piht Bull (Delta Dawg Guitars). Last reply by PKB Jan 31, 2014. 7 Replies

brass canjo/cbg

Started by Mario Poggio. Last reply by Mario Poggio Nov 28, 2013. 7 Replies

Can Orientation

Started by Alan "Poor Boy" Ackerson. Last reply by Alan "Poor Boy" Ackerson Oct 20, 2013. 6 Replies

Scale length and bridge

Started by Battmann. Last reply by Thomas "Duck" Petry Jul 23, 2013. 5 Replies

Attaching the Can

Started by Jim burt. Last reply by Russ Dugger Dec 13, 2012. 9 Replies

Loudness Versus Scale Length

Started by Randal. Last reply by Randal Oct 27, 2012. 9 Replies

resso cone

Started by Mal Chilvers. Last reply by rusty case Oct 10, 2012. 2 Replies

Latest Activity

Bernie Edwards liked Bill Turner (Wunkyman)'s photo
4 minutes ago
Bernie Edwards liked Bill Turner (Wunkyman)'s photo
5 minutes ago
Bernie Edwards liked Miku's photo
6 minutes ago
BUGGY (C) replied to Slowpaw Steve T's discussion CIGAR BOX NATION CHRISTMAS ALBUM 2019
"Christmas dinner sorted!! ;>)"
1 hour ago
BUGGY (C) replied to Slowpaw Steve T's discussion CIGAR BOX NATION CHRISTMAS ALBUM 2019
1 hour ago
BUGGY (C) replied to Slowpaw Steve T's discussion CIGAR BOX NATION CHRISTMAS ALBUM 2019
"Steve how's it going?... yeh count me in for one...I will let you know more when I figure it…"
1 hour ago
Cause the Blue rat replied to Slowpaw Steve T's discussion CIGAR BOX NATION CHRISTMAS ALBUM 2019
"Thanks Slowpaw teve for doing this again. Something I look forward to participating and hearing…"
2 hours ago
BrianQ. liked Miku's photo
2 hours ago
BrianQ. liked Bill Turner (Wunkyman)'s photo
3 hours ago
BrianQ. replied to James Pobog's discussion Question about pre-amps
"I play through those amps all the time, no problem? How many inputs does it have, does it have an…"
3 hours ago
BrianQ. replied to Jon's discussion How do I solder a rod piezo to a jack?
"That’s a rod piezo? I bought that same one from gitty, really only 1/4” shorter than a…"
3 hours ago
Taffy Evans replied to James Pobog's discussion Question about pre-amps
"Maybe Paul Craig will buy in with some first hand knowledge. Taff"
3 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->