So I've made a few of this tin can banjo things. Having a blast playing on them. I've made a couple out of empty tin "soup" cans and one out of a beer can. I cut a few other cans to prepare them to go on a neck but my question is this: have you guys found a pretty easy and reliable way to cut the tops off the aluminum cans that won't leave a lot of shrapnel hanging about? I crimped it flat on the beer can build but didn't like the way it distorted the "head" of the can.





Views: 713

Replies to This Discussion

 Hi, I havent tried making one out of aluminium yet, But I have used the soup cans with the pop off top.  I get a ball peen hammer and use the round peen end and apply pressure to the sharp part and can get it to roll forward so the sharp part is sort of curled up so it wont cut you. Maybe it would work better on aluminium cans then the steel ones?

I haven't made a Canjo yet-just starting my first CBW, as well as a Fiddley-diddley-duclcimer-thingy(using a Bow on it whatever it turns out to be). However, i've used vegetable cans in non-musical projects, and I find an ordinary can opener works great-just take a craft file or 120-grit sandpaper to the inner rim and you're done! I doubt that would work on soda cans about a jeweler's saw or craft saw with a fine metal-cutting blade(with no downward pressure on the cut) and then medium grit paper on the rim, stroking inward?

I honestly don't think modern soda cans are sturdy enough for the hole to act as a decent bridge myself-the ones I see around here crumple like some of the thicker beer cans might do all right if the tops/botoms are thick enough.

Some people use a rotary cutting tool like a Dremel tool and I imagine it would do a great job, but I haven't bought one yet, so have not tried it. With some practice with different cutting patterns you should be able to find a way to fold the edges over so they won't be so exposed and so will be less likely to cut someone.

Also, when I choose a can for a canjo I like those with pop & peel off tops, as they leave a pretty good looking "cut" without having all those jagged edges. But,even then the edges can be sharp and require some filing.

These days I tend to use cookie tins where the problem is basically limited to the hole for the neck.

I usually cut them like this: >---<  (my "cutting pattern")

With a cut down the center and then cutting the pieces to be folded back on the diagonals. When done carefully folding, the jagged edges are inside the tin so people aren't so likely to cut themselves.


Hey tnx, Rand!

I've been wondering the ez est way to cut for a neck-thru can..


I've found using a plain ol' twist can opener works great on beer and soda cans. It leaves the lip and there's virtually no roughness on the inside.

Buy small can broth or drain though a small hole leave lid intact maybe

Google safety can opener. These do not leave sharp edge when they open. Walmart has them and they can be ordered online. If you are doing lots of canjos it might be worth the investment.  I use the pull tab type cans and then pound the shsrp edge flat with a ball peen hammer.

I have made only two beer can canjos. I use a utility knife to punch thought and cut the aluminum top. I use a Dremel with a drum sanding head to finish the edge and a little sand paper to clean. Works for me... My can opener would damage the outside of the can.

With Cans, I use a belt sander along the top.  Hold it down on it for a few seconds and eventually it will Pop off.  On a production line, the top is actually just stuck on it, so a little belt sanding on the rim will usually release it, then take some 220 along the brim and you got a clean cut can.

Couple a years ago, Ben did a video removing a can top using a slab of concrete.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Canjo Tablatures

Started by Adam Jellison. Last reply by Adam Jellison Jan 8. 6 Replies

Can Cutting

Started by Mike Whisenhunt. Last reply by Glenn Watt Nov 22, 2019. 9 Replies

The Gas/Kerosene/Oil Can variety: a community image bank

Started by Diane in Chicago. Last reply by James Conder Nov 5, 2018. 7 Replies

The Cookie Tin Variety: a community image bank

Started by Diane in Chicago. Last reply by Brown Water Jerry (Rice) Aug 17, 2018. 34 Replies

How to adjust Intonation???

Started by JL. Last reply by Wichita Sam Mar 10, 2017. 9 Replies

1st Electric Canjo Build

Started by Greg Thompson. Last reply by TN Twang Aug 20, 2016. 4 Replies

Reds Wicked Apple canjo

Started by Greg Thompson. Last reply by TN Twang Aug 14, 2016. 8 Replies

Chromatic fretting.

Started by Graham Alibone. Last reply by Graham Alibone Sep 15, 2015. 6 Replies

Gunpowder Jug Resonator

Started by David Harris. Last reply by Greg Thompson Nov 27, 2014. 1 Reply

Can Jo for Children

Started by David Bowes. Last reply by David Bowes Sep 29, 2014. 11 Replies

Strings: Materials, Techniques, Sound, Etc.

Started by Dustan Eichler. Last reply by TN Twang Jun 13, 2014. 23 Replies

Circular hole tuner design

Started by Philip Daniel. Last reply by Rand Moore Apr 4, 2014. 10 Replies

cookie tin banjo (tinjo)

Started by Hillbilly Hobo. Last reply by Rand Moore Apr 4, 2014. 1 Reply

mag pup

Started by jabes. Last reply by jabes Mar 25, 2014. 2 Replies

Overthinking a simple cookie tin ?

Started by Piht Bull (Delta Dawg Guitars). Last reply by PKB Jan 31, 2014. 7 Replies

brass canjo/cbg

Started by Mario Poggio. Last reply by Mario Poggio Nov 28, 2013. 7 Replies

Can Orientation

Started by Alan "Poor Boy" Ackerson. Last reply by Alan "Poor Boy" Ackerson Oct 20, 2013. 6 Replies

Scale length and bridge

Started by Battmann. Last reply by Thomas "Duck" Petry Jul 23, 2013. 5 Replies

Attaching the Can

Started by Jim burt. Last reply by Russ Dugger Dec 13, 2012. 9 Replies

Loudness Versus Scale Length

Started by Randal. Last reply by Randal Oct 27, 2012. 9 Replies

Latest Activity

Alice Wong updated their profile
1 minute ago
MadGomer commented on Shane Speal's group Building a Cigar Box Guitar 101
"No worries Gary, everyone here is eager to help, keep the questions coming!"
4 minutes ago
Dave Lynas commented on the anonymous pick's video

Swamp witch guitar high desert

"I like that wagon wheel sound hole Pick. "
6 minutes ago
Gary Mullens commented on Shane Speal's group Building a Cigar Box Guitar 101
"Thanks for the feedback. A bit confused on how to post here. It's different to what I am…"
8 minutes ago
Dave Lynas commented on Randy S. Bretz's video

Tennis Racket fretless

"Great sound Randy. The Racketeer !"
9 minutes ago
Dave Lynas liked Randy S. Bretz's video
10 minutes ago
KOOL DOG HOOCH replied to Sean Murphy's discussion Table saw for fretting, blades, and power
"My buddy Richard uses a copingsaw for fretting because of the kerf thickness.  So with that,…"
1 hour ago
Profile IconMadJohnShaft, Jean Francois HIEBLER, Howard Mishler and 10 more joined Cigar Box Nation
1 hour ago
3 Chord Ziggy commented on Shane Speal's group Building a Cigar Box Guitar 101
"Also wondering why Gary's question seems lost in the mist.  Thanks, Mark Bliss, for the…"
1 hour ago
Lothar Ahnert liked ChickenboneJohn's video
2 hours ago
Lothar Ahnert liked ChickenboneJohn's video
2 hours ago
MadGomer commented on Shane Speal's group Building a Cigar Box Guitar 101
"Was wondering why I couldn't find Gary's comment and reply to it. Thanks for the…"
2 hours ago



© 2020   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->