Ive been looking for data for a baritone build.   I have read a 26.67” scale helps to define the guitar as baritone.  Before I get down to this, I wondered if I could get the parameters, is scale length, fret count, 3-4 string, typical tuning, what type of strings and any other parameters that define the build as baritone.

if this is info that is easily found, I would be happy for a link.  But finding cigar box baritone guitar plans or parameters were not easy for me to find. 

Thanks for your consideration

Views: 114

Replies to This Discussion

Ie.  G open fret, g on 12 fret.   I’ve got the

at but on the 12th fret it maybe flat or sharp, based a digital tuner.

Is that considered good, though not 100% “on” ?

Depends on how far off it is on the 12th. A little compensation tuning is expected as long as the compensating doesn't ruin the open tuning, a lot means the intonation is off. ;)

I always tune open and then compensate at the 12th every time I tune up.

Pardon me for resurrecting a four month old post, but what's drop C or drop B tuning going to be?

I'm imagining that drop C is going from DAD to CAD...But I haven't a clue on what 'drop C-drop B' means, nor am I quite sure what tuning you'd be dropping from to get to drop B.

I'm enamored of the idea of a baritone CBG after watching some of Shane Speal's videos, but I'm trying to figure out what sort of tuning (he says something about drop C in one of his videos).


A standard Bass is tuned with the same notes as the guitar except they are one octave lower than what is tuned on the guitar. So people that wanted darker tones on their guitar's would "drop" the tuning of their guitars to a lower than standard tuning.

A drop C would be C/G/C lower than the usual G/D/G on a 3 string CBG. It is hard to drop more than 2 or 3 notes because the strings start to get too loose on a standard length CBG/Guitar(24.5" to 25.5"), but a Baritone scale guitar(26" to 28.5") will take out that looseness of the strings for lower tunings.

Of course a lot of this depends on what gauge strings are being used and on what scale length is being used.

My first build was a 25.5” scale acoustic pencil box.

Everywhere I read was Open G.

I wanted lower and found Open E. 

So the strings I used are E .046, B .035, E .026

Now I found Open D or Drop D tuning.  

I purchased a set of Dunlop Heavy Core for drop D tuning.  .054 is heaviest string in the pack.

(these are electric guitar strings)

I think as long as you have the mix of strings to get you the deep you need scale could be anywhere from 25 to 30.

My second build is a 25” inch Gitty made neck.  Going to buy the Shane Spiel Open D strings for it.  Will be my Grumbler.  :)

The term Baritone does apply to scale length, but as Jim Kurtz points out, heavy gauge string can get you convincing Baritone sound.

A Baritone scale is going to be tuned lower than a regular guitar scale and that brings lower tone like the heavier strings will also do while not technically being a Baritone scale. 25.5 isn't very far off from Baritone scale anyway.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

what defines a cigar box, baritone guitar

Started by Tim Pannabecker. Last reply by Paul Craig Nov 1. 18 Replies

Short Scale Resonator Bass Build

Started by Paul Craig. Last reply by Paul Craig Jun 8. 28 Replies

My latest build

Started by Donny Bell. Last reply by Reg Seward Mar 31, 2018. 2 Replies

Baritone a la fender bass VI

Started by Adam Crofts. Last reply by William J Russell Oct 22, 2015. 2 Replies

Joining Lumber

Started by Where's Uranus? May 22, 2013. 0 Replies

Latest Activity

Glenn Kaiser liked Gary W aka Rev. Bluejeans's photo
1 minute ago
Poorness Studios posted photos
12 minutes ago
Uncle John commented on Gary W aka Rev. Bluejeans's photo

KFFA King Biscuit Joint - Helena AR Blues Fest

"Oh, that would be cool to visit and attend."
25 minutes ago
Uncle John commented on Gary W aka Rev. Bluejeans's photo

Project: Barbed Wire

"How are you tuned? I take it that it's a wall hanger. Well, a cool one."
26 minutes ago
Uncle John commented on Gary W aka Rev. Bluejeans's photo

Project: Barbed Wire

"That is pretty cool. Long scale traveling 3."
27 minutes ago
Uncle John commented on Gary O'slide's video
28 minutes ago
Lonman left a comment for Poorness Studios
"My apologies for the late return- thanks for the request. Always enjoy seeing your work"
47 minutes ago
Lonman and Poorness Studios are now friends
48 minutes ago
BrianQ. liked Rick Tish's blog post Player's Gear--brick and mortar shop
1 hour ago
BrianQ. commented on BrianQ.'s photo

One stringer shaping up...

"Thanx for the kind comments :D"
1 hour ago
BrianQ. commented on BrianQ.'s photo

Mock up -Tinjo

"Thanx for the Likes fellas, much appreciated  :D"
1 hour ago
BrianQ. commented on BrianQ.'s photo

Mock up -Tinjo

"Thanx Ghostbuttons, I decided to go with bamboo toothpicks & skewer for the nut this time, only…"
1 hour ago



© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->