I'm building this rather different from the norm. I have a solid piece of Malaysian Rubberwood(Oak) from a chair seat that I had lying around. I've made guitar bodies out of this wood before with great results. My plan is to route out a cavity in the body under the plate and mount the Red Oak neck in a cavity pocket like most solid body guitars.

It will have a bridge position Humbucker(probably mounted towards the middle position) with a coil tap and wired to a 3-way switch that will also be wired to a piezo that I'll mount under the plate. Hoping that it will work well. I have corian for the nut and I'm going to make my own adjustable bridge.

The neck is done except for the nut. It's a 25" scale with 22 frets. Red Oak neck and fretboard with natural finish and Truoil. Used Blue colored pencils for the side markers and Blue plastic coat hangers for the fretboard markers. Jumbo fret wire and tuners from CBGitty. The headstock is painted and will match the body. Used a 3/8ths" steel rod for a non-adjustable trussrod.

I wanted a color(Ice Blue Metallic) that I couldn't find. I usually use Dupli-Color Perfect Match spray paint, so I went to the auto parts store and found some Light Blue Metallic that wasn't quite what I wanted. So I got some Silver to use as a base coat since most metallic paints are thin enough for the base/base coat to show through. I got just what I wanted. I might have a hard time matching the body to the headstock since the Red Oak is different from the body wood.

Here's a couple of pics of what I have so far.