...but does it go to 11?

Views: 90

Reply to This

Replies to This Discussion

I think that goes to eleventeen ;-)

A friend of mine had a guitar with built in effects back in the 80's. Eventually the effects stopped working and that made the whole guitar quit working. He asked me to fix it, but I didn't have a schematic to follow and not much internet info to follow back then. Had to disconnect all the electronics and wire it up like a regular guitar.

looks like it has a regular guitar jack and a second output for what looks like a synth/drum machine in old school analog form.. 

if you save the pic and turn it upside down it has switches for 16',8', 5 3/8', 4', 2 2/3' like pipe organ stops on an old hammond organ each with ther own volum pot so you can adjust the mix .

looks really thick too, to fit all the electronics in it..

The  description  said  something about  an  organ,  so yeah there's that  going  on...

I think the second jack might be an XLR jack used simply for phantom power. I've seen that before on guitars with built-in effects.

Hang it on the wall for a conversation piece.

Possibly the poster-gitty for Wretched Excess.

LOL, for sure!

I appreciate guitars with the innovation and craftsmanship that goes into them. This is a nice looking piece, but all the knobs, switches and wording totally distract your attention away from the rest of it!  For example, Taffy Evan's latest work, that's eye candy! Just like a good work of art your eyes move from area to area taking in the overall effect. This thing! Your eyes are glued to the electronic part of it and no where else. If you do look else where you are drawn back to the bling. I personally wouldn't enjoy this guitar to play. Number 1, if I wanted that much in voices, I'd use my keyboard(it has several guitar voices). Number 2, way too much to break and go wrong with a hefty repair bill! My keyboard! Gut it out salvage parts and buy another, find them cheap for sale all over! Just my 2cents.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

new bridge

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig 12 hours ago. 22 Replies

Pup redux...

Started by James Pobog in Performances, How to Play, Lessons, Concerts. Last reply by Paul Craig 12 hours ago. 15 Replies

Make a Lo-Fi Telephone Microphone! EASY 5 Minute Project

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Shane Speal shanespeal.com 13 hours ago. 5 Replies

Salt when clamping!

Started by KOOL DOG HOOCH in Building Secrets, Tips, Advice, Discussion. Last reply by Titch the Clown yesterday. 15 Replies

Homemade Fretless Bass Schematic

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by BrianQ. on Sunday. 2 Replies

My CBG History

Started by Uncle John in Other stuff - off topic, fun stuff, whatever. Last reply by Dennis "Denbo" Goodinson on Saturday. 39 Replies

Latest Activity

Paul Craig replied to Paul Craig's discussion What's on your workbench?
"I bought a old Motorola 1957 stand alone record player at a yard sale for 20 bucks. All the veneer…"
1 hour ago
Fergus Lester replied to Paul Craig's discussion What's on your workbench?
"For now I think I'll keep the tube chassis in there. It's the safest place to store it. I…"
1 hour ago
Jeff 'Bones' Reilly liked Uncle John's photo
1 hour ago
Paul Craig replied to James Pobog's discussion lots of new stuff and possibly an original idea...
"Keep it fretless so you can make the nut movable to change scale lengths. Use a clamp for securing…"
1 hour ago
Paul Craig replied to James Pobog's discussion Another wiring question
"Only problem with moving the nut is putting all the frets out of place, unless you have a fretless,…"
1 hour ago
Paul Craig replied to Paul Craig's discussion What's on your workbench?
"So it is, I was thinking of the neck above which is maple under the headstock and what looks like…"
1 hour ago
Paul Craig replied to Paul Craig's discussion What's on your workbench?
"Fender has a Coral Red that is Pinkish and they have the Shell Pink and the Frost Rose which is…"
1 hour ago
Paul Craig replied to Paul Craig's discussion What's on your workbench?
"Those caps are of large volt ratings and they can have enough voltage stored to stop your heart, so…"
2 hours ago
Taffy Evans replied to Paul Craig's discussion What's on your workbench?
"Oops, that Ibenez neck above is maple Paul. Some people can break anything haha, ask Mike…"
2 hours ago
Paul Craig replied to Fergus Lester's discussion CB gitty 2.5w amp distortion
"A lot of these amps come with a block type gain pot on the board to set the gain level. You can…"
2 hours ago
Fergus Lester replied to Fergus Lester's discussion CB gitty 2.5w amp distortion
"Yes that sounds like what I'm after but am curious to know how it sounds without the psycho…"
2 hours ago
Paul Craig replied to Paul Craig's discussion What's on your workbench?
"Having those maple pieces in it is probably what keeps them from breaking. Haven't seen a…"
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->