Hi, I made a slide show of a guitar build to give to the customer along with the guitar, which I did. Now I would like to show the slide show on here but it has a song playing along in the back ground. Its an old Hank Williams track, does anybody know if I can share this video/slide show, or would I upset somebody? I don't know how or if I can remove the soundtrack.

Cheers Taff 

Views: 130

Reply to This

Replies to This Discussion

Unfortunately no. But you could mute the original video sound and put something like your own playing. 

Removing and replacing depends on the video editing software you have. Best be is hit Youtube. Type in what you want to do with the name of your software. 

There's a million videos on YouTube that has "somebody's" music for a soundtrack! To cya, I have seen credits at the end.

I looked this up and here is a partial answer.  It appeared that if you dug deep enough that you could find out if a particular song's copyright is now cleared.

When does music become public domain? Music falls under the same copyright as text, but sound recordings are governed by a different set of rules, so you should know which set of laws control the content you’re seeking.

Music itself is protected by standard copyright law.

Music and lyrics are protected by the same copyright law that protects books and other fixed works. While the specifics vary in some cases, general guidelines for copyright law are:

Works created before 1923 are public domain.

Works created between 1923 and 1964 are protected for 28 years. Copyright holders can renew copyrights for an additional 67 years, but, if they don’t renew, copyright protection lasts for only 28 years.

Works created between 1964 and 1977 are copyright protected for 28 years, but the 67-year renewal is automatic, for a total of 95 years of copyright protection. The earliest works under this category are in the public domain starting in 2059.

Works created after January 1, 1978, are protected for the life of the creator plus 70 years.

Sound recordings fall under a different set of rules.

Hi Guy's, thanks Blue Rat, I see if I can get my head around your suggestion.

Uncle John, thanks for putting in all that effort, I did a little search but did not get anyware.

Taff

And because you are in Australia  not in the US. The advice by Uncle John is only slightly wrong.

In Australia, by treaty we recognise the copyright as it applies in other countries according to where the creation was. 

In Youtube they try to recognise local law.

In Australia, in line with the Bern convention and English Common Law we had a till death plus 50 rule up to 2004 when we changed to the plus 70 rule. Complicating this is that our free trade agreement with the US recognises US Copyright so everything Uncle John wrote applies for American works. The most odd consequence being that the copyright for "Waltzing Matilda" was registered in the US by some charlatan in the 1950s even though it was a well known Australian poem with a tune applied (and simplified) from a book of "Scottish Airs". The Scottish copyright currently follows the UK legislation but may have been different because they have their own legal system separate from but linked to the current English system. The most common used versions of Waltzing Matilda seem to be based on the 1934 Billy Tea advertisement, which is the one coppied by the 1950s American charlatan.

  • It is enough to make any red blooded Aussie quake in the sheepskin boots he is no longer allowed to call UGG boots because some damned Yankee registered it as a trade mark in the US.

Yep, got it Tich. I found it's a complicated exercise to even find out who the copyright owners are.

One  account mentioned that even if he as the performer/writer was to give permission others like record companies or whoever, could stand in the way. Bottom line is don't do it. 

I had two versions of the video one with soundtrack and one without, guess which one I lost.

Thank for your help  Tich.

 Taff

should be easy to do Taff.  Kden Live is a free multiplatform video editor.

here is a tut on how to remove audio. in this he is swaping out audio for music but all you want is to remove the audio?

https://www.youtube.com/watch?v=iiNryxwAnSo

Great Tim, I'll look into it, thanks.

Taff

Hi Tim, had a look at the video a lot to get my head around. Looked at the download for the Kden and it looks too involved for me. When  I see do this - do that - but don't do this.....and if this happens, I sorta shy away cos'  I don't know what I'm doing. Thanks anyway.

Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Question about parallel piezo setup.

Started by Cause the Blue rat in Building Secrets, Tips, Advice, Discussion. Last reply by Cause the Blue rat 45 minutes ago. 7 Replies

Volume/Tone Pots

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Cause the Blue rat yesterday. 4 Replies

CONTEST CANCELLED: We Need Your Photos!

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Alex Fong on Friday. 2 Replies

Mods to CBG kit

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by James Pobog on Wednesday. 4 Replies

s/s lm386 draw amp,

Started by GARAGE HERMIT in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig on Wednesday. 8 Replies

Latest Activity

3 String Guitars posted photos
10 minutes ago
Dave Lynas commented on Poorness Studios's video
Thumbnail

Into The Mystic on CBG

"I clipped my tuner to my pad and you were playing D for the first chord. Then C#. Then G for the…"
43 minutes ago
Cause the Blue rat replied to Cause the Blue rat's discussion Question about parallel piezo setup.
"Thanks again Taffy. Any idea of the impedance of three piezo in a row? I was going to slap a Duncan…"
45 minutes ago
Dave Lynas commented on cbgkent's video
Thumbnail

How to remove unwanted stickers easily

"I have a Wagner heat gun. I’ll try the “man dryer”. Thanks CB! Nice to see you…"
56 minutes ago
Dave Lynas liked Fantacone Box Works's photo
1 hour ago
Dave Lynas commented on Dave Lynas's photo
1 hour ago
Dave Lynas commented on Dave Lynas's photo
Thumbnail

The Duke of Padouk

"I’m at least two screws missing AGP. I wired Duke up today and didn’t work! Duke hums…"
1 hour ago
Fantacone Box Works posted a photo
1 hour ago
Taffy Evans replied to KOOL DOG HOOCH's discussion HELP!! Going out of my flipping mind(intonation problem)
"Hi Hooch, the actual bridge is not skewed but the saddle itself is angled to give strings…"
1 hour ago
Myron Joe Hickel replied to Mark Bowen's discussion Setup for planing neck back angle for bolt on neck
"Now that is much easier than the jig I made for my router. Quick and easy I like it."
1 hour ago
Myron Joe Hickel liked Mark Bowen's discussion Setup for planing neck back angle for bolt on neck
1 hour ago
Uncle John commented on cbgkent's video
Thumbnail

How to remove unwanted stickers easily

"I don't seem to have a hair dryer. But my sweety does and this will come in handy.  Thank…"
1 hour ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->