Guys and Gals,

I've got several pieces of walnut ( 8" x 12" x 1/5" ) and I wanted to build boxes to use later on for CGBs.

The problem is that the woodgrain is across and not along the longest side. As far as I know the grain should be along the longest side for strength - I fear that it won't withstand steel strings and will be prone to cracking.

Wod do You think? Steel strings, nylon or:

1. Can I glue the top/back from two pieces ? ( not usual guitar way 'vertically' but to get the grain orientation right it have to be 'horizontally')

2. Can I glue the top from 4 pieces? (like checkerboard - or sheet of paper folded twice)

I'd be grateful for any input.

I'll include pics later today.

Best,

Tomasz

Views: 310

Reply to This

Replies to This Discussion

Here's an ebay auction for a 9K acoustic guitar with a flame maple top.

http://www.ebay.com/itm/KP-Acoustic-6-string-Guitar-Koa-body-Flame-...

I don't think you have any stability issues to worry about. Walnut is a hardwood. 

Actually the flame occurs across the grain, but if it is minor issue then I'll do neck through with those.
Thanks!

Just out of curiosity - have you build CBG not neck through?

OOPs, I'm sitting hear laughing at myself. Your absolutely right  Tomasz. Sorry about that. 

This one was built using traditional guitar construction and materials.It has the best acoustic qualities of any I've built

Some pics of some of my builds, tops are very thin. Braces can vary with the build in size and number. braces shown are of course not completed.

Hi, I'll start by saying [just so that you get a picture ]that the most  important part of a guitar as far as tone, volume and response is the top. There is far too much to understand in producing the best performing top to go into here, but suffice it to say I do bare these principles in mind when building my CBGs. BUT its not essential, it will work no matter what you do.  

Even though a CBG top is a lot smaller and has far less stress from 3-4 strings I find the cbg's I build with consideration to acoustic sound in mind and not so much a WOW look appeal, do sound a lot better acoustically.  But to answer the question

If I understand you correctly the grain in your top would run from side to side of the guitar instead of the conventional neck to tail. With the grain going the shorter distance [side to side]  would make it stiffer, so stronger, allowing you to go thinner. Suitable bracing could be used at any joined areas. The more timber in the top the less response. If you're putting a pickup in the guitar you will still get a good sound without worrying too much about what I say here.

What makes a regular guitar top stronger is the strategically placed braces inside the top. What one is looking for is enough flex in the top to allow the strings to move the top to create sound and enough bracing to provide support and tailor tone and volume, without too much dampening.

Cheers Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Forum

Ben Gitty's Simple-Build 2x4 Instruments

Started by Cigar Box Nation in Feature Articles. Last reply by Glenn Kaiser yesterday. 10 Replies

What would you do?

Started by T-Gripped in Building Secrets, Tips, Advice, Discussion. Last reply by Cigar Box Nation on Friday. 3 Replies

Tone capacitor

Started by RG Murphy in Performances, How to Play, Lessons, Concerts. Last reply by the anonymous pick on Thursday. 1 Reply

Latest Activity

Bernie Edwards commented on Laranor's photo
Thumbnail

Ukelele Soprano 33 cm

"I liked your sound board barring too. I'm not sure how much effect it has on these small…"
15 minutes ago
Bernie Edwards commented on Laranor's photo
Thumbnail

Ukelele Soprano 33 cm

"This picture clarified for me what the previous one was showing. It's like the scratch plate…"
17 minutes ago
Uncle John commented on Doug Thorsvik's video
Thumbnail

I Won't Back Down: 3-String Cigar Box Guitar

"I should have called the dulcimer a dulcimer tuned strummer.  It would not be hard to add…"
6 hours ago
Dave Lynas liked Silent Jim's video
6 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

I Won't Back Down: 3-String Cigar Box Guitar

"I fret all three strings and GDG is my standard tuning. Adding frets to a dulcimer would work, but…"
6 hours ago
Dave Lynas liked Silent Jim's video
7 hours ago
Dave Lynas commented on Cigar Box Nation's video
7 hours ago
Uncle John commented on Uncle John's video
Thumbnail

Emily ~ an original and newly written song. A work in progress.

"Thanks, Rope.  I know you like story songs too.    Tastee Freeze is long gone from…"
7 hours ago
Uncle John commented on Doug Thorsvik's video
Thumbnail

I Won't Back Down: 3-String Cigar Box Guitar

"OK, I am thinking about it.  It may be under 90 degrees most of the week and I could build new…"
7 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

I Won't Back Down: 3-String Cigar Box Guitar

"Very observant Rope! As those of you who have tried Zoom for making music are well aware, it leaves…"
7 hours ago
Rope Walker Country Star commented on RTZGUITARS's video
Thumbnail

Jugg Head Slap

"Never mind the visual, that was a fantastic sound you put together! Funky and clean at the same…"
8 hours ago
Rope Walker Country Star commented on Uncle John's video
Thumbnail

Emily ~ an original and newly written song. A work in progress.

"Thats a great song, UncleJake! Simple story, simple song, and it works so well ‘cause…"
8 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->