Wine Box guitar and box airtighness - Cigar Box Nation2024-03-29T01:13:36Zhttps://www.cigarboxnation.com/forum/topics/wine-box-guitar-and-box-airtighness?feed=yes&xn_auth=noThanks :-)
I didn't close it…tag:www.cigarboxnation.com,2021-09-23:2592684:Comment:36657672021-09-23T19:52:12.564ZBenhttps://www.cigarboxnation.com/profile/Ben161
<p>Thanks :-)</p>
<p>I didn't close it yet to be able to further manipulations, but I think I will stop here and try to screw/glue it tight and see if it changes it's sound, I'll keep you posted</p>
<p></p>
<p>Thanks :-)</p>
<p>I didn't close it yet to be able to further manipulations, but I think I will stop here and try to screw/glue it tight and see if it changes it's sound, I'll keep you posted</p>
<p></p> Personally, I set pillars in…tag:www.cigarboxnation.com,2021-09-20:2592684:Comment:36645352021-09-20T02:17:35.208ZJames Poboghttps://www.cigarboxnation.com/profile/JamesPobog
<p>Personally, I set pillars in the inside corners and screw to them (though I am far from expert). I also screw the neck to internal support blocks.</p>
<p>Personally, I set pillars in the inside corners and screw to them (though I am far from expert). I also screw the neck to internal support blocks.</p> Shane Speal & many others…tag:www.cigarboxnation.com,2021-09-19:2592684:Comment:36644342021-09-19T20:32:37.657ZBrianQ.https://www.cigarboxnation.com/profile/BrianQ
<p>Shane Speal & many others use hot glue under the lid of cbg’s, it seals em up proper? Boxes with warpy tops could be somewhat of a challenge, I usually screw those stubborn corners down after gluing them, it’s worked so far, knock on wood :) good luck on this, let us know what happens :)</p>
<p>Shane Speal & many others use hot glue under the lid of cbg’s, it seals em up proper? Boxes with warpy tops could be somewhat of a challenge, I usually screw those stubborn corners down after gluing them, it’s worked so far, knock on wood :) good luck on this, let us know what happens :)</p>