This could be git related or not. So, what's on your workbench at the moment?

I have 4 scarf joint necks in different stages of work.

A 25" scale pine 5 string neck for a Banjo-Res, A 25" scale Red Oak neck for my 6 string Strat-Res build, A 24 & 1/2" scale Red Oak neck for my 6 string Double Cut Tele build and a 27" scale 6 string Baritone Conversion neck for a Modern Strat body I have.

Views: 30897

Attachments:

Reply to This

Replies to This Discussion

Looking nice Cause, first song you have to play must be "Knocking on Heavens Door".

don't understand why that song but OK. Took a listen to Dylan's version and it's very doable on a GDG. But have to fake the second chord. And the song is heavy on the slide so when playing just the chords it sounds a bit flat. It's a great four chord song. I'll have to post a how to. 

Thanks Paul. I might just do that.

I'd of gotten done sooner. A friend turned me on to a Japanese Anime. Didn't realize it was a full length movie. Incase someone is interested "Bakemono no Ko". 

So here's where it's at so far. Still need to glue up the rest of the box itself. The long piece behind everything is the back access plate. 

This is the front of the guitar. Along with the 'pick guard'. It's easy to tell this will be a 24.75 scale and not a 25.75. That missing inch really shows up between those pickups. 

That bit of practicing I did on cutting straight lines with a scroll saw really paid off. Not perfectly straight. But at 20 feet and me jumping around no one will ever notice. : )

And here's the final glue up. Be a lot of sanding and shaping. Going to round up the edges. Lesson learned from my Cosmic Glider. Sharp edges are no fun. : ) 

Those home made clamps work great. Allows me to clamp both the sides and what's inside the guitar supporting the top, pickguard and bridge at the same time. 

And a change of plans. going to use the Probora pickups. Their black. So this will have a black neck. Black pickups. Black knobs and a black bridge. No, the box isn't going to be black. Or bright pink. : ) 

Top looks great. I was making a poor attempt at humor on the song seeing how the wood came from an old door. Nuk Nuk Nuk

I like those clamp, easy to make, effective and inexpensive to make.

OK now I understand. That joke went WAY over my head. : )

These clamps are both easy to make and use. Finger tight first. Making sure they're level. Then ease them down. I use a ratchet wrench.  Hold onto the threaded rod till it's hard to hold wile tightening down. You don't have to crush to clamp. 

Hi, my first thought when I saw these clamps was good idea [and I've used something similar in the past myself], but then I thought they may put more clamping pressure on the ends near the rods, than in the middle. I could be wrong and your in the best place to judge Cause.

I the picture of the system I used to clamp the tops of hollow neck slide guitars, I only needed the pressure over the edge of the sides. I set the photo up to illustrate.

Also shown is my much more laborious method. Your clamps save the need for deep throated clamps. so long as the clamping pressure is also in the middle of the job. Easy to check really. I'll have to give that type of clamp a try.

Cheers Taff

Ya, if you get really crazy tight you'll bow the clamps. Loose pressure in the middle. If you know your going to need a lot of pressure  (if your working with warped wood ) you could always slip a very thin shim under the center. 

It's best to get used to working with this kind of clamp. I've used those old two handle wooden screw clamps for years. Absolute favorite clamps. So I'm used to how they work. Put one in place and, after finger tightening, check to make sure it's flat all the way across. Check to make sure it's flat after fully tightening the clamp as well. 

A hardwood like oak or similar would be less likely to bow and thickness would also play a part. Probably needs to be at least 1 & 1/2" square. Of course they'll get heavy to handle that way too.

I used what I got free from work. Pine. That's why their chunky. Just a 2x4 cut in half. 

Hi, if weight is a consideration as well as strength in a length of timber, may I suggest keeping in mind the following. Its what one does when working with the bracing of guitars.

Braces are, in the top anyway, higher than they are wide. This is to get the maximum strength with a lot less mass [weight]. Going wider does not add as much strength to a beam as going taller or thicker. 

With guitar braces I keep in mind that 20% off the height equals 50% less strength. I suppose the reverse would be true. 

The clamp pictured  [I made a dozen or more of these some years ago] shows the sort of dimensions that give a good strength to weight ratio, 1 1/8 x 13/16.

Cheers Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
14 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
14 hours ago
Kent Thurston updated their profile
15 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
15 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
15 hours ago
Poorness Studios liked A.D.EKER's video
17 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
18 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
20 hours ago
A.D.EKER commented on A.D.EKER's video
yesterday
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->