This could be git related or not. So, what's on your workbench at the moment?
I have 4 scarf joint necks in different stages of work.
A 25" scale pine 5 string neck for a Banjo-Res, A 25" scale Red Oak neck for my 6 string Strat-Res build, A 24 & 1/2" scale Red Oak neck for my 6 string Double Cut Tele build and a 27" scale 6 string Baritone Conversion neck for a Modern Strat body I have.
Paul, I thinkith you're perhaps over thinking this. People like cigar boxes, I have several non-smoking relatives keeping a keen eye out for special boxes.
Hi, you got laugh, cars kill people too, are they gonna ban them as toys too.
And don't let your kids ride bikes. They'll grow up and become bikers and join a gang. :) Special people. Keep doing what your doing and let the crazy people ruin their own lives.
Time to turn lemons into lemon aide. The story behind this new hole and what this new hole is going to be. Turns out the crate plywood I've used for the top of this guitar is a bit two thick. So I decided to use a forstner bit to make it a bit thinner. Well all I can say is it worked on the first try. Good news! It's a quality bit. Didn't chip the hole out. So guess where my new second sound hole is. Going to cut off a piece of that punchi and screw it in from the inside. Then drill another volume knob hole closer to the neck side of the guitar. I'll have to get some long shaft 250K pots to finish this one. Be a one of a kind guitar with a one of a kind sound hole. Who else would put a sound hole between a volume and tone knob? :)
Awesome. Lots of work pays off. Kudos!
Love the gloss !
I'm hoping it doesn't happen, just never know what some people will find next to Bi**h about. ;) Logic doesn't matter and Common Sense isn't as common as it used to be.
Super nice. Clean work !
Looks really good! Have a beer or two or three. With or without the pizza! :-)
Thanks for the comments fellas. I posted a sound clip over on the videos page. It sounds pretty awesome.