This could be git related or not. So, what's on your workbench at the moment?

I have 4 scarf joint necks in different stages of work.

A 25" scale pine 5 string neck for a Banjo-Res, A 25" scale Red Oak neck for my 6 string Strat-Res build, A 24 & 1/2" scale Red Oak neck for my 6 string Double Cut Tele build and a 27" scale 6 string Baritone Conversion neck for a Modern Strat body I have.

Views: 17314

Attachments:

Reply to This

Replies to This Discussion

: ) more like fixing what I should have fixed. I wired Rusty up so i could blend the bridge pickup in with the neck. Or the other way around depending on where the five way switch is set. This requires no load pots to work right. Wired it up with regular pots. It works, but not the best. The glider has been wired backwards from the start. And really does need a tone control. The bridges on both guitars were to far forward. Actually had to cut the adjustable screws so the stings wouldn't break on them on Rust. 

What I may do with Rust is switch the bridge and middle pickups. Not a real fan of the quaky sound. Also I really never use the bridge pickup on a strat. I know I'll have to lower the mid pickup to make up for the volume differences. 

If you switch the middle and bridge pickups, you'll still get the quack sounds when those 2 are played(comes from 2 pickups in parallel and 1 pickup is rwrp of the other), but the bridge and neck together will have a thin out of phase type sound which some like and some don't. 57 Strat's didn't have a middle rwrp pickup, but they were wired to a 3 way switch(no combinations).

So you could leave the pickups in their usual place and wire in a 3 way switch or wire in a toggle switch for series/parallel in the 2 and 4 switch positions of the 5 way switch. The series option sounds really good because the pickups are a bit away from each other, it's different from the regular humbucker. Sounds a lot like the Telecaster Deluxe that had Wide Range Humbuckers.

The quack sound is the reversed wound middle pickup. That out of phase sound. It's Fender's version of hum canceling. Both the bridge and neck pickups are wired the same. I would end up with something more like the original Fenders. Before they started going with the reversed wound middle pickup. 

May leave the bridge pickup hole empty. Don't think a hole would look to bad in a rusty box. :)  But still leave the 5-way switch in. Eventually put a mini humbucker in. Just a matter of taste I guess. 

I'm doing this to a Squier Bullet Strat.The bridge(Cavalier Fat Lion) pickup is a Telecaster Bridge pickup, middle pickup is a DeArmond style Gold Foil(RWRP of the bridge) and the neck is a Seymour Duncan minibucker(made like the snake oil) that I'm converting to a real Firebird.

Bridge and middle will be wired to a 4-way switch for bridge/bridge & middle in parallel/middle/bridge & middle in series with 250k volume & tone. Neck pickup will be separate volume only to blend in when wanted.

Not your typical Strat pickup selection. This is going to be a Hot Rod. 8)

Let's hear it when you get it back together, looks great so far!

I got the SD minibucker converted to a Firebird. The Gold Foil and Tele bridge pickup ended up being the same polarity and wind direction. I couldn't alter the GF pickup because of the way it was grounded, i could flip the wires on the Tele pickup but not the magnets. So I ordered another Tele pickup done the other direction and polarity. A small set back.

Another setback for this loaded pickguard. The pickups wouldn't work right with the 4-way switch and the minibucker on a volume to the same jack. If The Gold Foil wasn't grounded internally and I had some isolation diodes, I could fix this.

I do have a 5-way switch though so I started wiring it up and everything worked.

The Seymour Duncan mini-bucker I converted to a Firebird wasn't potted with wax from the factory. I attempted to pot the pickup, but used something that ended up being conductive resulting in a shorted pickup.

I've had to order another pickup from GFS because I know they're already potted in wax and easier to mod. When this pickup comes in I can mod it and wire it in, then the guitar can be strung up and enjoyed.

Sometimes plans just don't work out the way you envision them to.

Working on 45

Looks great Fantacone.

https://photos.app.goo.gl/SnKRGMg8aDPfv5Pf8
Less Pauley
Damaged box with mahogany top
Mahogany neck , fretboard of unknown origin
Scrounged up some sweet used parts on the ole Ebay
Probably could have bought a Les Paul for what I have in it but where's the fun in that?

looks like a Mike Orr fretboard. He likes to use walnut, usually a 25.5 scale length. Where did you find it? He does fine work,

It was in a box with a bunch of other wood I bought online
I fretted this one at 24.75

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Today's progress 9/22/19

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Poorness Studios 46 minutes ago. 2 Replies

My Obsession

Started by Del Puckett in Performances, How to Play, Lessons, Concerts. Last reply by Will "KOOL DOG HOOCH" Bonner 21 hours ago. 4 Replies

Info please.

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Andries D. EKER 23 hours ago. 11 Replies

Hollow construction?

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Andries D. EKER yesterday. 7 Replies

Sigh........

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Friday. 4 Replies

Sigh........

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by James Pobog on Thursday. 2 Replies

Nuts

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by BrianQ. on Thursday. 6 Replies

Another idea...

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 3 Replies

Yeah, OK,...

Started by James Pobog in Other stuff - off topic, fun stuff, whatever. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 9 Replies

Shovel guitar and sizes

Started by Laurence Owen in Building Secrets, Tips, Advice, Discussion. Last reply by Laurence Owen on Tuesday. 5 Replies

Blog Posts

Mailing boxes for CBG's

Posted by Kevin Patrick on September 18, 2019 at 10:02am 4 Comments

So...

Posted by Emer M. on September 16, 2019 at 11:59am 0 Comments

Mama Pearson's Soaporium

Posted by Rick Tish on September 14, 2019 at 8:52pm 0 Comments

Latest Activity

Dave Lynas commented on Dave Lynas's video
Thumbnail

Hohner Special 20 and the Goose

"It does have a good cross harp sound. A Marine Band with attitude Uncle."
2 hours ago
Jeff 'Bones' Reilly commented on Jeff 'Bones' Reilly's photo
Thumbnail

#4 Commissioned Build

"You know me to well AGP I’m always left of  can’t bring myself to a central neck…"
4 hours ago
the anonymous pick replied to James Pobog's discussion Today's progress 9/22/19
"love the electric conduit :-)"
4 hours ago
Dennis "Denbo" Goodinson liked Dave Lynas's video
4 hours ago
Dennis "Denbo" Goodinson liked Korrigan's photo
5 hours ago
Dennis "Denbo" Goodinson liked Korrigan's photo
5 hours ago
Dennis "Denbo" Goodinson liked Korrigan's photo
5 hours ago
Dennis "Denbo" Goodinson liked Vern Hallett's photo
5 hours ago
Dennis "Denbo" Goodinson liked Vern Hallett's photo
5 hours ago
Dennis "Denbo" Goodinson liked Vern Hallett's photo
5 hours ago
James Pobog posted a discussion

Today's progress 9/22/19

Got stuff done, but not as much as I wanted, had some damage control to think through...Right…See More
6 hours ago
Myron Joe Hickel replied to GARAGE HERMIT's discussion my diy table saw, it's not for the squeamish,
"Now that bring back memories. Back in the late 70's early 80's I use to buy a…"
6 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->