What is the optimum nut height and bridge height combination. What are the best materials to use?

I have been building and experimenting for a couple of years now. 

 

1) I am curious for peoples thoughts on the best set up heights for the nut and bridge.

 

2) Having experimented with many materials, what is the best nut material and bridge material?  

Views: 11257

Reply to This

Replies to This Discussion

As a first step, for the nut I use an old blunt jigsaw (aka sabresaw) blade that I found was just a touch higher than my frets. To check, put it between two frets and get a short straight edge/fret rocker if you  get a little bit of rocking,  I covered one side of the old blade with  masking tape to minimize the chance of scratching the fretboard. Then I hold that against the nut and cut my string slots with a junior hack saw, stopping when the blade hits the old blade. I then adjust the width of my slots as necessary. At this stage the instrument is ready for stringing up. 

I then follow  up with the universal third fret method on all my builds. You press down between the second and third fret. There should be a slight gap of a gnat's whisker between the string and the first fret. Old time builders tested with a cigarette paper. I just make it really really close but without  touching. Given the above step I usually don't have much to do. 

This is how all instruments I build from bass ukuleles to Tahitian ukuleles are set up at the nut. No exceptions for instruments needing fingered frets.   Slide or fretless can be higher.

Action (at the 12th) varies between instruments from 1.5mm on Tahitian ukes to 6mm for bass ukes and in between  for everything else. It is more of a taste and playing style thing.  If fret noise is your thing (I call it fret growl on bass ukes) make the action lower. If your frets are a little uneven leaving the action a little  high can compensate for that. 

Thanks for the tip, Titch. Guess I've been pretty Damn lucky so far, using the "eyeballing and feels right" method. I like your method better. I couldn't get my first one to sound right now I know at. Thank you again.

Someone revived an old post.

On the cheap rosewood or Ebony for both saddle and nut, easy to shape and cut string slots nice warm tone.

Bone blocks for nuts work great for 3 and 4 string bridges. There is a reason guitar company's use tone wood and bone.

Bolts look great but don't transfer vibrations very well, I think in the last 7 years we have all learn this but still use them. We all have a box of old bolts.

On fretted necks use a headstock tuner to set string height, check intonation between open note and the 1st fret if they are not correct none will be. I didn't have a clue 7 years ago.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources


Forum

- Memorial for Dave Lynas -

Started by Cigar Box Blues in Performances, How to Play, Lessons, Concerts. Last reply by Cigar Box Blues 3 hours ago. 5 Replies

Headless Guitar Project - a $100 eBay kit & Gitty pickups

Started by Cigar Box Nation in Feature Articles. Last reply by Poorness Studios 6 hours ago. 5 Replies

Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by RTZGUITARS Sep 17. 14 Replies

Blog Posts

Prototyping with a big ol' wine box

Posted by Ben on September 23, 2021 at 4:00pm 0 Comments

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Bookie's Poor Man's Dobro

Posted by Steve Bookout on July 18, 2021 at 2:04pm 4 Comments

Latest Activity

Randy S. Bretz posted a photo
2 hours ago
Taffy Evans replied to Ben's discussion Fretboard, frets and radius
"Haha, it's gonna be a long wave, I'm still learning after 50 years building and…"
3 hours ago
Taffy Evans replied to Ben's discussion A big wine box
"Hi again, yes would be good to not use plywood for a fingerboard, I would think that the wood…"
3 hours ago
Cigar Box Blues commented on Uncle John's photo
Thumbnail

Dave and his Angel bear riding off into the wide blue yonder. New adventures.

"and Dave questions wherever or not it was a good idea to pick up hitch hikers!!!!!"
3 hours ago
Cigar Box Blues replied to Cigar Box Blues's discussion - Memorial for Dave Lynas -
"Thanks Poorness! I am trying my best, there is alot of work behind the scenes, I am so…"
3 hours ago
A.D.EKER commented on A.D.EKER's video
4 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Iris Acoustic Cover by Dave Lynas

"Thanks  John,Jim ,Danny, !  most people have a counterpart somewhere in the world ,whit…"
4 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Rusty Bottom Brown A. D. Eker 2021

"ill better play em ,or they might get Rusty !"
4 hours ago
A.D.EKER posted a video

Rusty Bottom Brown A. D. Eker 2021

When the Rust sets in ! O Boy ! are we in trouble ? or do we enjoy Rusty old age ? as long as it runs dont kill it ! take it appart? no leave as is , you mig...
5 hours ago
Taffy Evans replied to Ben's discussion A big wine box
"Hi, Ben, That's good, glad to help. Taff"
5 hours ago
Poorness Studios liked Steve Bookout's discussion Double Necked E-lectric Whachamacallit
6 hours ago
Ben posted a blog post

Prototyping with a big ol' wine box

It all started when I listened to…See More
7 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->