What is the optimum nut height and bridge height combination. What are the best materials to use?

I have been building and experimenting for a couple of years now. 

 

1) I am curious for peoples thoughts on the best set up heights for the nut and bridge.

 

2) Having experimented with many materials, what is the best nut material and bridge material?  

Views: 11257

Reply to This

Replies to This Discussion

As a first step, for the nut I use an old blunt jigsaw (aka sabresaw) blade that I found was just a touch higher than my frets. To check, put it between two frets and get a short straight edge/fret rocker if you  get a little bit of rocking,  I covered one side of the old blade with  masking tape to minimize the chance of scratching the fretboard. Then I hold that against the nut and cut my string slots with a junior hack saw, stopping when the blade hits the old blade. I then adjust the width of my slots as necessary. At this stage the instrument is ready for stringing up. 

I then follow  up with the universal third fret method on all my builds. You press down between the second and third fret. There should be a slight gap of a gnat's whisker between the string and the first fret. Old time builders tested with a cigarette paper. I just make it really really close but without  touching. Given the above step I usually don't have much to do. 

This is how all instruments I build from bass ukuleles to Tahitian ukuleles are set up at the nut. No exceptions for instruments needing fingered frets.   Slide or fretless can be higher.

Action (at the 12th) varies between instruments from 1.5mm on Tahitian ukes to 6mm for bass ukes and in between  for everything else. It is more of a taste and playing style thing.  If fret noise is your thing (I call it fret growl on bass ukes) make the action lower. If your frets are a little uneven leaving the action a little  high can compensate for that. 

Thanks for the tip, Titch. Guess I've been pretty Damn lucky so far, using the "eyeballing and feels right" method. I like your method better. I couldn't get my first one to sound right now I know at. Thank you again.

Someone revived an old post.

On the cheap rosewood or Ebony for both saddle and nut, easy to shape and cut string slots nice warm tone.

Bone blocks for nuts work great for 3 and 4 string bridges. There is a reason guitar company's use tone wood and bone.

Bolts look great but don't transfer vibrations very well, I think in the last 7 years we have all learn this but still use them. We all have a box of old bolts.

On fretted necks use a headstock tuner to set string height, check intonation between open note and the 1st fret if they are not correct none will be. I didn't have a clue 7 years ago.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources


Forum

Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by RTZGUITARS Sep 17. 14 Replies

Blog Posts

Prototyping with a big ol' wine box

Posted by Ben on September 23, 2021 at 4:00pm 0 Comments

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Bookie's Poor Man's Dobro

Posted by Steve Bookout on July 18, 2021 at 2:04pm 4 Comments

Latest Activity

Carl Floyd updated an event
Thumbnail

South Carolina Cigar Box Guitar and Arts Festival at Stoneledge Park Event Center

September 25, 2021 from 10am to 6pm
Roots music has the Americana twang sound. That's the sound is found in Blues, Rock n Roll, Country…See More
56 seconds ago
Randy S. Bretz liked Kirk Whitham's photo
44 minutes ago
Buggsy updated their profile
2 hours ago
RON NORTHCUTT commented on Uncle John's photo
Thumbnail

Our friend, Dave Lynas, passed away Friday, 9,17,21

"It is with great sadness that I just learned of Dave's passing. I never got to meet him…"
2 hours ago
Cigar Box Blues commented on Kirk Whitham's photo
2 hours ago
Dr George Melvyn Ella liked Randy S. Bretz's photo
4 hours ago
Dr George Melvyn Ella liked Adam Cripps's video
4 hours ago
Gary O'slide posted a video
5 hours ago
Bernie Edwards liked Kirk Whitham's photo
6 hours ago
Michel liked Kirk Whitham's photo
7 hours ago
Uncle John commented on A.D.EKER's video
Thumbnail

Rusty Bottom Brown A. D. Eker 2021

"Got the pic, Andries.  Thanks.  Will share it with a couple of biking friends."
9 hours ago
Uncle John commented on Uncle John's video
9 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->