I've got some lovely wood I'm using for some CBG necks and I'm looking at what to use as a finish. I've been using Tung oil on my past builds and have really liked the deep, hard finish it creates - but DANG it takes a long time to dry and with multiple coats, that's at least a week of just finishing. It's been worth it - but we had some remodeling work done in the house recently and the contractor left a can of Danish oil. I'm trying it on my latest build and am curious to see how it turns out, but I'm wondering what folks think as far as one vs. the other?

Views: 194

Reply to This

Replies to This Discussion

Yeah I'm kind of impatient when it comes to finish also. This method works for me and it only takes a couple days. Different woods will have different results. Poplar soaks it in and gives a nice soft shine so you may need more coats depending on how shiny you want it.while oak and other hard woods result in a harder shinier shine with less coats in my experiments. 

Good luck with it Sean. 

Hi Vern, this method is for the impatient builder.

See the photos, I applied a coat of Danish Wax finish and was playing this lap slide reso within half an hour.

Half done......

...and now the full job. Taff

Looks good. There's no finish under the wax? 

Hi Vern, as I explain in the first post on this thread.

Taff

Nice but I'll stick with my method.

Vern

Tru oil. It is a mix of tung and linseed oil. Apply with fingers 3 coats 3 hours apart. Scuff with 000 steel wool and run fridge magnet over it to remove any steel wool dust. Do another 3 coats and scuff again then do 1 light coat and leave over night.
Get tru oil from gun shop as it is used for oiling gun sticks.
I used it on 25 plus builds and love it.
You can do more coats if you need to fill the grain.

I've been curious about the tru oil and will probably pick some up, give it a shot.

Hi Stew, yes true oil gives a nice finish, I use it on electric guitar necks to give a smooth soft feel to the neck, after removing the lacquer if refinishing on a customers guitar. 

I was going to mention that I feel it is too expensive to do a whole instrument, compared to my Danish wax, the last one I bought was $15.00 for 3 f/oz from a gun shop. I just checked again and find that it is now available from guitar luthiers suppliers at $30.00 for 3 f/oz. 

Taff

So having used the Danish Oil on my latest build (though I need to read the can and see, apparently, what it REALLY is...) I have to say that I like how it dries faster, but the finish isn't as nice as the Tung Oil.

Also - is it usual that it has a kind of...fishy...smell?

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Neck mortising jig

Started by Rough Cut Tom in Building Secrets, Tips, Advice, Discussion. Last reply by Rough Cut Tom on Wednesday. 2 Replies

Swedish Inventor Creates "Ondophone" Diddley Bow Instrument!

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Paul Craig on Sunday. 3 Replies

Ukulele & piezo

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Jan 11. 1 Reply

Fun with a 2x4 Bass - Build Your Own

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by James Pobog Jan 9. 30 Replies

Blog Posts

Dual lap steel

Posted by Ron Lutz on January 9, 2020 at 2:42pm 1 Comment

My 3 Gitty Kits

Posted by Poorness Studios on January 8, 2020 at 9:20am 2 Comments

My CBG details

Posted by Paul scofield on January 1, 2020 at 9:22am 2 Comments

Latest Activity

Dave Lynas posted videos
10 minutes ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Song for Old 97

"Harmony made some great guitars for the money back in my day Daniel. My Rocket for one. Our…"
3 hours ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

The Coo Coo

"Thanks AGP. My version came from the riff I found this morning. It sounded like a bird singing to…"
3 hours ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

The Coo Coo

"Andries that’s the guy (most famous Dave). He pops up when you google me. A Brit I think.…"
3 hours ago
Dave Lynas commented on Dave Lynas's video
4 hours ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Old 97

"Thanks AGP. Thanks Nancy Kat. Thanks Daniel. Igloo is right D. Blizzard is right over Duluth. Looks…"
4 hours ago
Jeremy Wade replied to Jeremy Wade's discussion Pickup for cigar box banjo
"Thanks for the advice, a pre amp pedal is not something i thought of. I may try a wood top banjo…"
4 hours ago
Sean Murphy replied to Sean Murphy's discussion Tung oil vs Danish Oil?
"So having used the Danish Oil on my latest build (though I need to read the can and see,…"
5 hours ago
Sean Murphy replied to Sean Murphy's discussion Tung oil vs Danish Oil?
"I've been curious about the tru oil and will probably pick some up, give it a shot."
5 hours ago
Omar Mariani liked Viktor Bogdan's photo
5 hours ago
Don Craig liked Randy S. Bretz's photo
6 hours ago
Don Craig liked Jeffery A, Krueger's photo
6 hours ago

Events

Music

Loading…

© 2020   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->