I've got some lovely wood I'm using for some CBG necks and I'm looking at what to use as a finish. I've been using Tung oil on my past builds and have really liked the deep, hard finish it creates - but DANG it takes a long time to dry and with multiple coats, that's at least a week of just finishing. It's been worth it - but we had some remodeling work done in the house recently and the contractor left a can of Danish oil. I'm trying it on my latest build and am curious to see how it turns out, but I'm wondering what folks think as far as one vs. the other?

Views: 307

Reply to This

Replies to This Discussion

Yeah I'm kind of impatient when it comes to finish also. This method works for me and it only takes a couple days. Different woods will have different results. Poplar soaks it in and gives a nice soft shine so you may need more coats depending on how shiny you want it.while oak and other hard woods result in a harder shinier shine with less coats in my experiments. 

Good luck with it Sean. 

Hi Vern, this method is for the impatient builder.

See the photos, I applied a coat of Danish Wax finish and was playing this lap slide reso within half an hour.

Half done......

...and now the full job. Taff

Looks good. There's no finish under the wax? 

You got any of that gray wet/dry sandpaper?  Flip it over and use the paper side like you would the paper bag.  The poor man's micro-fine sandpaper.

Hi Vern, as I explain in the first post on this thread.

Taff

Nice but I'll stick with my method.

Vern

Tru oil. It is a mix of tung and linseed oil. Apply with fingers 3 coats 3 hours apart. Scuff with 000 steel wool and run fridge magnet over it to remove any steel wool dust. Do another 3 coats and scuff again then do 1 light coat and leave over night.
Get tru oil from gun shop as it is used for oiling gun sticks.
I used it on 25 plus builds and love it.
You can do more coats if you need to fill the grain.

I've been curious about the tru oil and will probably pick some up, give it a shot.

Hi Stew, yes true oil gives a nice finish, I use it on electric guitar necks to give a smooth soft feel to the neck, after removing the lacquer if refinishing on a customers guitar. 

I was going to mention that I feel it is too expensive to do a whole instrument, compared to my Danish wax, the last one I bought was $15.00 for 3 f/oz from a gun shop. I just checked again and find that it is now available from guitar luthiers suppliers at $30.00 for 3 f/oz. 

Taff

So having used the Danish Oil on my latest build (though I need to read the can and see, apparently, what it REALLY is...) I have to say that I like how it dries faster, but the finish isn't as nice as the Tung Oil.

Also - is it usual that it has a kind of...fishy...smell?

Hi, here is a bunch of wood finishes, wax's and oils that I have also used, work really well.

I have  used the Hard shellac, the shellac flakes, The ultrashine wax and shellawax cream

http://ubeaut.com.au/ubhome.htm

Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

VIDEO FEATURE: Building a micro shop for the work area challenged

Started by KOOL DOG HOOCH in Feature Articles. Last reply by Shane Speal shanespeal.com 11 hours ago. 15 Replies

Califest cancelled?!

Started by Silent Jim in Fests and Concerts: Organizing and Promoting. Last reply by Richard Sundberg 13 hours ago. 11 Replies

Latest Activity

Soap Box Blues commented on Dave Lynas's photo
Thumbnail

Building up the color

"rooster cogburn!"
6 minutes ago
Mellowmuso87 replied to Mellowmuso87's discussion Resources for Australian cigar Box guitar builders!
"Cheers Bro! I do love a dumpster dive! got a couple of old smoke alarms for piezos!"
58 minutes ago
Mellowmuso87 replied to Mellowmuso87's discussion Resources for Australian cigar Box guitar builders!
"Hey Taff! wow that's an epic drive to grab some strings!  https://cbgemporium.com im…"
1 hour ago
Mellowmuso87 replied to Mellowmuso87's discussion Resources for Australian cigar Box guitar builders!
"Thanks Lads! There is heaps of music shops but nothing parts wise in specifics for CBG's.…"
1 hour ago
Mellowmuso87 and Jeff 'Bones' Reilly are now friends
1 hour ago
Gary W aka Rev. Bluejeans commented on Dave Lynas's photo
Thumbnail

wet Paint

"Sort of a "FrankenChicken" vibe going on there! Love it!"
2 hours ago
Gary W aka Rev. Bluejeans commented on Dave Lynas's photo
Thumbnail

Building up the color

"Dave!  That's wild!  Love it!"
2 hours ago
Jeff 'Bones' Reilly replied to Mellowmuso87's discussion Resources for Australian cigar Box guitar builders!
"Gday Cobba I’m in Hobart welcome to the Nation . If your lucky you can still get old cigar…"
3 hours ago
Taffy Evans replied to Mellowmuso87's discussion Resources for Australian cigar Box guitar builders!
"Hi and welcome, I'm in North Queensland so I buy from Melbourne, Sydney and Brisbane, and from…"
4 hours ago
François replied to James Pobog's discussion The more I use piezos...
"Piezos don't come in many flavors or quality. Disk or linear, big or small, and that's…"
4 hours ago
Jeff 'Bones' Reilly commented on Dave Lynas's photo
Thumbnail

Sound Hole and Wicked Bucker

"Very nice Dave those wicked buckers are the best so glad I use them as well . "
4 hours ago
Jeff 'Bones' Reilly liked Dave Lynas's photo
4 hours ago

Music

Loading…

© 2020   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->