Screwed up in a big way! Working on a CBG on my picnic table aka work bench when I knocked off my box of tuner parts(see where this is going). Living in Fla the land of sun and sand, lots and lots of sand. To make a long story short, I need to replace the screws, without them my projects are dead in the water. I can't find them in any hardware store. What size are they, so I can order some? Thanks.

Views: 183

Reply to This

Replies to This Discussion

shovel and a sieve??  might find them..lol 

but seriously after a bit of searching the googles i found this in a forum post "For vintage (Kluson type) tuners they are #2 x 3/8", round head Philips sheet metal screws." 

stew mac also carries an assortment of tuner screws  https://www.stewmac.com/Hardware_and_Parts/Tuning_Machines/Tuner_Pa...

Quick, head down to Home Depot and pick up a hand full of those strong magnets. Glue them to some string and drag around the area where your stuff fell. If they are there, those magnets will yank them out.

LOL, I went the route of magnets, they are either plated brass or aluminum. As far as the shovel/ sieve route. To expand on the tale of whoa, while I was on my hands and knees, the dog decided to help me dig. Need I say more! I scooped up a shovelfull of sand and sifted it on a piece of screen. Fla being what it is, the area I dropped the screws in just happened to be a giant cat box. So needless to say it wasn't screws I found! :-(   But hey thanks for the ideas and size, as long as they don't come by slow boat from China I'll order a hundred or so, just not from Stewmac. I don't have a problem with profit, but do with being bent over!

That's really funny! I have so many days like that when building my CBG'S.Nothing you can do but laugh. Sorry but the dragging the magnets through the kitty littler box really got me roaring. Glad you got this sorted out.

For sure! Some days you're the 'dog', other times the hydrant! All you can do is laugh!

Bummer.

CBGitty sells 'em online, Try SKU:30-034-01. They also are kind enough to include an extra or two in tuner packs, which is very much appreciated. 

Thanks I'll check them out. I didn't know which size to order, being all thumbs I'm not use to working with thing that small.

Not at home  depo , or the usual suspects .. but ..

Ace Hardware "usually " has them .

Tried my local ace but no joy. Went to one of the guitar store/repair shop, no luck my neighbor that's responsible for getting me hooked on this addiction let me borrow a dozen out of his kits until my arrives next Monday. Found them on eBay 100 for less than $5+ free ship. The next time we get a good rain and I don't forget, I should be able to recover a bunch on the ground! Or they'll sprout and I'll end up with a tree with loose screws. Thanks everyone.

I would just search Lutherie Suppliers, you got dozens to choose from over there, lucky buggers. Australia got its fair share too.

Taff

For solid headstock:
https://www.cbgitty.com/craft-parts-hardware/100pc-2-x-3-8-stainles...

For slotted headstock:                                                                                            https://www.cbgitty.com/craft-parts-hardware/100pc-2-x-1-4-stainles...

I found them in brass the other day at Lowes.,.,#2 flat blade button head, 3/8"., in little plastic packs., they are available all over the net too.,stew-mac spams me about them all the time, in bulk.,.,The hobby store might have them.,.,around here they have craft stores (Michael's).,

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Piezo pup handling noise

Started by Kevin Keating in Building Secrets, Tips, Advice, Discussion. Last reply by Cause the Blue rat 9 hours ago. 5 Replies

CB-stompbox

Started by Jeremy Wade in Building Secrets, Tips, Advice, Discussion. Last reply by the anonymous pick yesterday. 1 Reply

Neck mortising jig

Started by Rough Cut Tom in Building Secrets, Tips, Advice, Discussion. Last reply by Rough Cut Tom on Wednesday. 2 Replies

Ukulele & piezo

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Jan 11. 1 Reply

Blog Posts

Dual lap steel

Posted by Ron Lutz on January 9, 2020 at 2:42pm 2 Comments

My 3 Gitty Kits

Posted by Poorness Studios on January 8, 2020 at 9:20am 2 Comments

My CBG details

Posted by Paul scofield on January 1, 2020 at 9:22am 2 Comments

Latest Activity

Dennis "Denbo" Goodinson liked BUGGY (C)'s video
2 hours ago
Dennis "Denbo" Goodinson liked BUGGY (C)'s video
3 hours ago
BUGGY (C) commented on BUGGY (C)'s video
Thumbnail

Funky Jam Dognut

"Thanks UJ, Will send some pics soon havent forgotten, just been a bit manic lately"
3 hours ago
the anonymous pick commented on the anonymous pick's video
Thumbnail

SWAMP WITCH GUITAR , MARY JANE

"Lol , Yup , Although i don't partake , i'm startin off 2020 on a "high" note…"
3 hours ago
Downtown Vinnie commented on the anonymous pick's video
Thumbnail

SWAMP WITCH GUITAR , MARY JANE

"Thats dope...uh uhhuhuh."
4 hours ago
Downtown Vinnie liked the anonymous pick's video
4 hours ago
the anonymous pick commented on BUGGY (C)'s video
Thumbnail

Song for Nancy

"OHHH Nancy kat .. :'-(   We pet owners  know this feeling all to well ....... but…"
4 hours ago
Ernest Gusella commented on Uncle John's video
Thumbnail

Sunday AM Gospel~ When That Train Comes Along.

"Nice sounding dog bowl resonator there! Good song too! Strum und Twang!"
5 hours ago
Doug Thorsvik left a comment for Clark Huffman
"Clark Just wanted to let you know Cigar Box Guitar Slingers - Spokane meets at the Airway Heights…"
5 hours ago
Doug Thorsvik left a comment for Ed Parry
"Ed Just wanted to Remind you Cigar Box Guitar Slingers - Spokane meets at the Airway Heights…"
5 hours ago
Doug Thorsvik left a comment for Craig W.Solomon
"Craig Just wanted to remind you that Cigar Box Guitar Slingers - Spokane meets at the Airway…"
5 hours ago
Doug Thorsvik left a comment for Larry Wright
"Larry Just wanted to let you know Cigar Box Guitar Slingers - Spokane meets at the Airway Heights…"
5 hours ago

Music

Loading…

© 2020   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->