Got stuff done, but not as much as I wanted, had some damage control to think through...

Right starting out I saw, tried to fix, and promptly screwed up, a problem with my headstock. Way too banana-shaped, and 'fixing' it only made it worse. The angles were not equal side to side. Since starting from scratch was not an attractive option, staring mode commenced and several ideas were thought through. The first, but way too much work was to cut it off and dowel/glue a new piece of wood and reshape. Scary. Next.....

Hmmmm....dowels, and a memory from jr. high wood shop. Pull the tuners, dowel the holes, sand/mill smooth, and re-layout the headstock. MUCH better, it's goiing to be painted anyway.

So that fix took some time, but I also got some fitment done. Also did some routing. This is the first time I've ever used a router. Have done the p/u cavity, the edges, and pulled off a rabbit cut to fit a recessed lid. Decided the nut is aluminum angle.

It's not completely fitted yet so the bridge and nut aren't mounted and the tone pot still needs a hole to crawl into.

I think the paint is going to be Colonial Red, with the wings gloss black lacquer.





Views: 67

Reply to This

Replies to This Discussion

love the electric conduit :-)

Wow. It looks really good James. Top notch build. It appears the nut may be a tiny bit higher than the bridge (that could just be pic angle though). If it is higher, I'd probably glue a small 1/8" (or whatever works) wooden shim under the bridge to raise it up just a tad. Other than that, it looks like you've got a really nice build coming along here.

Sweet looking so far. How are you going to finish the wood?

The body will be Rustolium Colonial Red, and the 'wings' will be gloss black

Can't wait to hear it.......

Like we use to say in construction, "looks good from my house!"  Seriously though, nice job. Just make sure you post a video can't wait to hear what it sounds like.

Sure will, but this project is far from being on a Shane Spiel 1-hour fast track...

Even Shane started out with less than perfect builds. All you can do is learn from others.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Preping boxes

Started by White Raven in Building Secrets, Tips, Advice, Discussion. Last reply by BrianQ. 21 hours ago. 3 Replies

This month's installment of "WHAT THE HECK IS IT?"

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by the anonymous pick on Sunday. 11 Replies

couple more pix

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by James Pobog on Saturday. 3 Replies

Wiring question

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by James Pobog on Saturday. 11 Replies

Blog Posts

Tab for Ry Cooder

Posted by Keith Gibson on September 30, 2019 at 12:44pm 2 Comments

Ducktail Run in James Dean Country

Posted by Rick Tish on September 29, 2019 at 9:57pm 1 Comment

Tiki mask guitar

Posted by Phil Stickings on September 27, 2019 at 12:39pm 5 Comments

Festival in the land that time forgot

Posted by Rick Tish on September 23, 2019 at 10:09am 2 Comments

Latest Activity

Steve Register replied to Steve Register's discussion First time using the Gitty Amp Kit
"I have an Epiphone guitar that I used to make sure it worked. Sounds good for a practice amp. I…"
6 minutes ago
Tom T replied to Steve Register's discussion First time using the Gitty Amp Kit
"Very clean build.Nice work.... Do you have anything to plug into it for a sound check?"
16 minutes ago
Bob "Ambrose" Negus liked 3 String Guitars's video
19 minutes ago
Bob "Ambrose" Negus liked Phil Stickings's photo
20 minutes ago
Bob "Ambrose" Negus liked Calim's photo
21 minutes ago
Bob "Ambrose" Negus liked AGP #'s photo
23 minutes ago
Bob "Ambrose" Negus commented on AGP #'s photo
Thumbnail

AGP #370 - ''Stellar''

"It's Game, set and match AGP.  I like the subtle and minimalistic build approach. Stellar…"
23 minutes ago
Bob "Ambrose" Negus liked AGP #'s photo
24 minutes ago
Martin Owen commented on smojo's group The Brits are coming
"I get all my bits and bobs on eBay"
26 minutes ago
Bob "Ambrose" Negus liked AGP #'s photo
28 minutes ago
BrianQ. posted a status
"That last gitty gang show got me all riled up, got 3 different gutbuckets on the bench, plus a whamola just for the hell of it :)"
29 minutes ago
Steve Register posted a discussion

First time using the Gitty Amp Kit

Here is my first time building an amp using the kit from CBGitty. I think it turned out pretty good…See More
29 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->