I recently tried title bond 3, and at the risk of teaching my grandma to suck eggs.
I found that it leaves a black line along the joint, which is virtually impossible to get rid of, so I will stick to titebond 2.
Just thought I would let you know before you spend your money.
I will try to use it up where it can't be seen, but I won't be buying any more.

Hope It Helps

Philyaboots.

Views: 277

Reply to This

Replies to This Discussion

I use Gorilla Glue (the white PVA, not the foaming polyurethane glue) it dries to a slight tan, clamping time of about 30 minutes...

Thanks for the tip on TB III!
I had bad luck with gorilla glue. Super strong at first but later the joints were brittle and some joints broke. I won't use it again.

Hi Philip. I have used TB III to glue fretboard to necks as well as most of my cbg gluing requirements through 2 big bottles. I have not observed the black line you describe. My wood is mostly red oak (necks and fret boards), a little poplar, and scraps of other stuff laying around. Wonder if the wood you use might have a hand in your negative effect? Not shillin' for TB3, just wondering.

I don't have observed the black line you describe neither, my necks are beech tree and it's even hard to check where the joint is.

When was it made "new"? The stuff I used foamed but it was quite a while ago.

TB lll dries darker than Elmers and if the joint isn't tight you might see a line of the glue there making the line. When joints are tight it never shows. TB lll is all I have ever used and it works fine when I pay attention to quality in my work, if not then I get what's deserved.

Hope this helps but I should have realised that a water based product would affect the white oak I am using.
I built my own camper van and lined the interior with oak finished ply panels, and you really need to keep water away from them as any water marks are black. I think I will stick with titebond 2 in the future.
Good luck and happy building and playing to you all.
Regards Philyaboots.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Frets and fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Tim Hooper 9 hours ago. 7 Replies

Perma grit sandpaper

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 17 hours ago. 4 Replies

Fret Sides Dressing

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Titch the Clown on Friday. 8 Replies

Slide off decals

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Friday. 10 Replies

30.5" scale lay-out help needed please!

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 20 Replies

Break angle for bridge

Started by Fantacone Box Works in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 28 Replies

Navigating this forum

Started by Fantacone Box Works in Performances, How to Play, Lessons, Concerts. Last reply by Fantacone Box Works Jul 14. 5 Replies

Blog Posts

Getting ready for next build

Posted by Sean Murphy on July 17, 2019 at 12:54pm 1 Comment

What wood is this?

Posted by Sean Murphy on July 16, 2019 at 10:48am 7 Comments

apology

Posted by Danny Gordon on July 13, 2019 at 7:30pm 3 Comments

Latest Activity

Dave Lynas commented on Dave Lynas's video
Thumbnail

Mean Old Tooth Ache Blues

"I go in for extraction today at 2:30. It will be nice to be rid of one more. This one won’t…"
46 minutes ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Ain’t No Mercy in this World

"The fruit curtains are in the little tin cabin on wheels Andries. Later in early autumn when the…"
52 minutes ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Waltz of the Scarecrows

"Thanks Andries. Wish I could make some room for a drum kit. Your drum adds so much. I’d love…"
1 hour ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

The Rabbit and My 22

"Yup Andries. I’ll change the facts in a song just for a good rhyme anytime. Ain’t no…"
1 hour ago
Will King commented on Rich's photo
Thumbnail

RTL TinBG Collection1

"I am partial to the Reeses PB Cups....Nice job Rich!"
1 hour ago
Rich commented on Rich's photo
Thumbnail

RTL Tinbox Batman Head stock rear view

"Thanks. I was more difficult than I'd thought it'd be. Seemed Like a Simple idea."
1 hour ago
Rich commented on Rich's photo
Thumbnail

RTL scarf joint

"I've never had one break... here."
1 hour ago
Evan Keeling left a comment for Poorness Studios
"Thanks. You do nice work as well."
1 hour ago
Evan Keeling and Poorness Studios are now friends
1 hour ago
Evan Keeling liked Poorness Studios's photo
1 hour ago
Evan Keeling liked Poorness Studios's photo
1 hour ago
Evan Keeling liked Poorness Studios's photo
1 hour ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->