Post up photos of your tin-tars!  These are the ones that look mostly like this:






Views: 5008

Replies to This Discussion

Here are a few more I built:

My effort for what it's worth. Since the picture was taken I've replaced the bridge with one made from an old ebony piano key.

Well, we have to have a close up of that bridge, then!
Mark aka. Junk Box Instruments said:
My effort for what it's worth. Since the picture was taken I've replaced the bridge with one made from an old ebony piano key.


Diane in Chicago said:
Well, we have to have a close up of that bridge, then!


A quick shot with a phone camera (best I can do for the time being)

If we can't use "canjo" as a generic name, maybe Diane's idea of "tin-tars" would be a good one. Could have a contest to come up with the best generic name and then promote that name on Google, CBN and other instrument making sites. But, I still personally prefer "canjo".

Diane, Mark: Those are some nice looking tin-tars! How are you bracing the necks to the cookie tins? It would be nice to have a few internal bracing / neck-to-cookie tin photos as well, if that's not asking to much.
Rand Moore said:
If we can't use "canjo" as a generic name, maybe Diane's idea of "tin-tars" would be a good one. Could have a contest to come up with the best generic name and then promote that name on Google, CBN and other instrument making sites. But, I still personally prefer "canjo".
I think canjo is established as a generic name (and there's probably a history for it that goes back a long way). But there's a discussion on this elsewhere. I've tended to call mine a tin banjo.
There are some pictures on my website, but it's difficult to explain the construction properly with a photo. Here's a quick sketch that (hopefully) shows how the neck and body are fixed together.

tin-tones...made from tea tins...ck the primitive raw sound. http://www.tin-tone.com/
I want that Nukki canjo so bad it kills me!
Diane in Chicago said:
Here are a few more I built:




Those Nukki tins come up on Ebay every once in a while. Some are deeper, with graphics on the side, too.

Jason Nelms said:
I want that Nukki canjo so bad it kills me!

Here's the innards, i put those little feet on either end and screw them to the bottom of the tin. I just use scraps, but others cut feet like that as part of the neck.

Rand Moore said:
Diane, Mark: Those are some nice looking tin-tars! How are you bracing the necks to the cookie tins? It would be nice to have a few internal bracing / neck-to-cookie tin photos as well, if that's not asking to much.
Nice looking instruments. Are they all electric? Or can such a small can make a fairly loud "personal sized" strummer. I like the upside-down head/neck design with the tuners on the bottom. Looks ultra-modern. No frets, I see. Four strings. How are they tuned? Re-entrantly like a ukulele? The small cans (tea tins, you say) remind me of some mini electric "guitars" made from altoid (sp?) cans I saw somewhere on the Internet.



AKA.WILLARDJ. said:
tin-tones...made from tea tins...ck the primitive raw sound. http://www.tin-tone.com/
Yes, this is the kind of photo I was asking for, thanks. And your method appears much more sturdy as compared to just attaching the cookie tin to the neck with a few wood screws. [By the way, Chinese immigration wouldn't let me out of the country yesterday because I accidentally overstayed my visa by one day. I was there one month ago, May 22nd and my plane tickets were for June 22nd and it didn't click that there were actually 31 days between the two dates. I need to get into the mindset that a "30 day Visa" means "2 weeks Visa" so that I have a lot of "slop time" to get around to exit to Hong Kong so I can return again for another 30 day -- I mean 14 day -- stay. Today I have to go to the Immigration Police Station downtown to pay a fine. They were closed yesterday when I discovered this problem, so they will likely charge me for 2 days overstay in spite of the fact that the station was closed at the time the problem was discovered. Enough to make me wonder why I put up with living here. Must be because of my wife, daughter and her family. My flight has been rescheduled for tonight and I'm returning to the States for a little R&R form the extremely hot summer weather in China. So, anyway, I've used some of this time to read/reply to CBN, e-mail and the like.]
Diane in Chicago said:
Here's the innards, i put those little feet on either end and screw them to the bottom of the tin. I just use scraps, but others cut feet like that as part of the neck.

Rand Moore said:
Diane, Mark: Those are some nice looking tin-tars! How are you bracing the necks to the cookie tins? It would be nice to have a few internal bracing / neck-to-cookie tin photos as well, if that's not asking to much.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Can Cutting

Started by Mike Whisenhunt. Last reply by Adam Jellison Oct 7. 8 Replies

The Gas/Kerosene/Oil Can variety: a community image bank

Started by Diane in Chicago. Last reply by James Conder Nov 5, 2018. 7 Replies

The Cookie Tin Variety: a community image bank

Started by Diane in Chicago. Last reply by Brown Water Jerry (Rice) Aug 17, 2018. 34 Replies

How to adjust Intonation???

Started by JL. Last reply by Wichita Sam Mar 10, 2017. 9 Replies

1st Electric Canjo Build

Started by Greg Thompson. Last reply by TN Twang Aug 20, 2016. 4 Replies

Reds Wicked Apple canjo

Started by Greg Thompson. Last reply by TN Twang Aug 14, 2016. 8 Replies

Chromatic fretting.

Started by Graham Alibone. Last reply by Graham Alibone Sep 15, 2015. 6 Replies

Gunpowder Jug Resonator

Started by David Harris. Last reply by Greg Thompson Nov 27, 2014. 1 Reply

Can Jo for Children

Started by David Bowes. Last reply by David Bowes Sep 29, 2014. 11 Replies

Strings: Materials, Techniques, Sound, Etc.

Started by Dustan Eichler. Last reply by TN Twang Jun 13, 2014. 23 Replies

Circular hole tuner design

Started by Philip Daniel. Last reply by Rand Moore Apr 4, 2014. 10 Replies

cookie tin banjo (tinjo)

Started by Hillbilly Hobo. Last reply by Rand Moore Apr 4, 2014. 1 Reply

mag pup

Started by jabes. Last reply by jabes Mar 25, 2014. 2 Replies

Overthinking a simple cookie tin ?

Started by Piht Bull (Delta Dawg Guitars). Last reply by PKB Jan 31, 2014. 7 Replies

brass canjo/cbg

Started by Mario Poggio. Last reply by Mario Poggio Nov 28, 2013. 7 Replies

Can Orientation

Started by Alan "Poor Boy" Ackerson. Last reply by Alan "Poor Boy" Ackerson Oct 20, 2013. 6 Replies

Scale length and bridge

Started by Battmann. Last reply by Thomas "Duck" Petry Jul 23, 2013. 5 Replies

Attaching the Can

Started by Jim burt. Last reply by Russ Dugger Dec 13, 2012. 9 Replies

Loudness Versus Scale Length

Started by Randal. Last reply by Randal Oct 27, 2012. 9 Replies

resso cone

Started by Mal Chilvers. Last reply by rusty case Oct 10, 2012. 2 Replies

Latest Activity

Paul Craig replied to James Pobog's discussion Pup redux...
"He's hitting the string and pulling it sharp with the tremolo, then does a bend…"
1 minute ago
Uncle John posted a photo

Good ole' Dirty Thirty and soon to be, Nifty Fifty

Using this birth year 1950 Iowa license plate has take me a long time. It's too cold here to work…
2 minutes ago
Uncle John commented on Uncle John's video
5 minutes ago
Uncle John commented on Uncle John's video
5 minutes ago
Uncle John posted a video

Pistol In My Hand ~ original by me.

I think the song is done. The title is still a work in progress.
6 minutes ago
François replied to Paul Craig's discussion What's on your workbench?
"I've never tried but unless you pull on it or bend it in crazy ways while heating it, I think…"
25 minutes ago
Shane Speal shanespeal.com replied to Shane Speal shanespeal.com's discussion Make a Lo-Fi Telephone Microphone! EASY 5 Minute Project
"These hacked phones have been used in studios for decades.  Here's Joe Satriani singing…"
31 minutes ago
Paul Craig commented on Bernie Edwards's blog post scale length vs personal physical characteristics??
"The different group names for the scale lengths are there to help identify what size guitar is…"
40 minutes ago
Gary O'slide posted a video

Gary O'slide - Nature - Cigar box guitar made in Borowice Lutherie

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
46 minutes ago
AGP # liked Andries D. EKER's photo
48 minutes ago
AGP # liked Bill Turner (Wunkyman)'s photo
49 minutes ago
AGP # liked Bill Turner (Wunkyman)'s photo
49 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->