Replies to This Discussion

Permalink Reply by François on July 16, 2019 at 9:01am

Thanks for the tip. I didn't know you could get paper like that.

I find it funny that under this product in the specs Walmart says that this item's gender is female...

They obviously didn't think of all the model makers who use things like that.

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on July 16, 2019 at 12:17pm

I'm surprised to learn that! You don't think there will be a protest.

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on July 18, 2019 at 3:44am

I read somewhere, if you print out decals spray a light clear coat on them, to prevent the ink being washed off!

• ▶ Reply

Permalink Reply by Taffy Evans on July 18, 2019 at 2:56pm

Hi Will, I was having a tidy up around the shop and came across this.

Its sheets of sticky back plastic for making stickers. I got a pack of these from the local office supply store. I made up my design on the computer and printed out a batch. 

I have pealed a bit of the corner back to show the transparency. I use these on boxes that I want the grain to show through, the Logo on the CBG shown has a solid background.

Thought it might be what you are looking for.

Taff

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on July 18, 2019 at 6:04pm

Thanks Taff, I was mostly putting out there in case anyone was interested, it was a fluke that I found the slide off paper. I like the idea of sticky back, do you varnish over the label? Speaking of which, is that label a "pdf" I'd love to get a copy of it!

• ▶ Reply

Permalink Reply by Titch the Clown on July 18, 2019 at 4:11pm

I use tracing paper as it turns largely transparent when embedded in either superglue or varnish. I use a cheap water based inkjet so the solvents do not affect them but they would run if using waterslide without additional treatment. Blacks work well. Other colours tend to look a little washed out.

The below was embedded in varnish.

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on July 18, 2019 at 6:14pm

Tracing paper! Never in a million years thought about even trying it for that purpose. Impressive. What brand are your tuners and source? Also the strings they're unique, are they nylon or gut?

• ▶ Reply

Permalink Reply by Titch the Clown on July 19, 2019 at 2:33am

The tuners are, or at least were regular open  back bass tuners that I widened the slots of.  The strings are bass ukulele strings apparently by Aquila but are apparently resold OEM sets. 

Full build at https://www.instructables.com/id/Designing-and-Making-a-Bass-Ukulele/

• ▶ Reply

Permalink Reply by Titch the Clown on July 19, 2019 at 2:37am

 These would  do the trick  https://www.cbgitty.com/tuners-machine-heads/chrome-bass-guitar-did...

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on July 19, 2019 at 2:56am

Cardboard Aided Design! LOL I didn't know that this process had a name. Thank you for the information. Nice build btw.

• ▶ Reply