Side Dot Markers

Maybe this has been posted before or it's just common knowledge and I'm a doofus. Regardless...

I've been using airsoft pellets for fretboard dots for a while. Minimal hassle, cheap and fairly consistent results. But the side dots are my nemesis. I know I could just buy the material and be done with it, but I'm either too cheap or just too hardcore DIY or... something. Mental block on these.

The other day, I spotted a CBG with screwheads woodburned into the fretboard. Thought that was pretty neat so I tried it last night. Didn't get the results I was looking for, but the light bulb went on. Why couldn't I just bolt a nail into my soldering iron and burn side dots.

Well, you can! It's not a proper woodburning set, but I cut the head off a nail, ground it flat and screwed it into my HF 30w soldering iron. Results! Also made some nice test dots with the actual nail head too. This may be my new go-to for dark markers.

Now, if you could only burn white...

1 member likes this

▶ Reply to This

Replies to This Discussion

Permalink Reply by Rob Todd on November 21, 2016 at 5:31am

When I have used rivets to feed the strings through I save the pins that the rivets were on. These have nice round heads. I trim them off at about 1/4" and nail them into the side of the neck as markers.

▶ Reply

Permalink Reply by Fomhorach on November 21, 2016 at 6:32pm

Nice idea. I do something similar with tiny little nails. Same size as the nails used with corner protectors. For fret markers I've been using the rivet heads.

▶ Reply

‹ Previous
1
2
Next ›

RSS

Welcome to
Cigar Box Nation

Sign Up
or Sign In

Or sign in with:

The Essential Pages

Site Sponsor

Forum

Blog Posts

Latest Activity

BrianQ. commented on Glenn Kaiser's photo

Less Paul by GK

"Lots of fun!!"

6 minutes ago

BrianQ. commented on Glenn Kaiser's photo

My New Less Paul

"Diddley Paul :) "

7 minutes ago

BrianQ. liked Glenn Kaiser's photo

My New Less Paul

7 minutes ago

Glenn Kaiser posted photos

4 hours ago

Doug Thorsvik commented on Doug Thorsvik's video

Da Do Ron Ron: 3D Printed Cigar Box Guitar

"Glad to put a smile on your face BrianQ! This one is a fun one to sing and play."

4 hours ago

BrianQ. liked Doug Thorsvik's video

Da Do Ron Ron: 3D Printed Cigar Box Guitar

5 hours ago

BrianQ. commented on Doug Thorsvik's video

Da Do Ron Ron: 3D Printed Cigar Box Guitar

"Another great oldie I thought I’d never hear on cbg!! :)"

5 hours ago

Doug Thorsvik posted a video

Da Do Ron Ron: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 198th Zoom Mtg 04/15/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...

8 hours ago

2 Comments 1 Like