I used a bolt on neck from CB Gitty for my last two builds. The neck attaches to a plank that goes through the box. To get the neck back angle right, I had to create a slight bevel on the plank where the neck connects. This bevel had to be flat, square and the correct angle. Please see the attached file to see a simple setup to do this using a bench plane. Planing%20a%20neck%20bevel.pdf

Views: 97

Attachments:

Reply to This

Replies to This Discussion

Hi, now that's using the grey matter.

Taff

Awesome work! 

Now that is much easier than the jig I made for my router. Quick and easy I like it.

I usually use a through piece to bolt the neck to on my CBG's and if I need a back angle, I cut the through piece with my Miter Saw.

If you don't have a Miter Saw, Plane or any other way to cut it, Stewmac sell Degree Shims made of solid wood for neck pockets of solid body guitars for about $2 dollars a piece. You can get 1 degree or 3 degree shims. You would have to make adjustments to the through piece height or adjust at the bridge for the extra shim height.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Kool tool find!

Started by KOOL DOG HOOCH in Other stuff - off topic, fun stuff, whatever. Last reply by KOOL DOG HOOCH 1 hour ago. 7 Replies

Necks

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Southpaw yesterday. 16 Replies

Amp kit

Started by Tim Ahlberg in Performances, How to Play, Lessons, Concerts. Last reply by Tim Ahlberg yesterday. 5 Replies

Ukulele question

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Titch the Clown yesterday. 1 Reply

Blog Posts

New Member need a little advice.

Posted by Don Paul on January 26, 2020 at 10:29am 5 Comments

Neck bowing

Posted by Mike Kinzie on January 24, 2020 at 5:38pm 2 Comments

Dual lap steel

Posted by Ron Lutz on January 9, 2020 at 2:42pm 4 Comments

My 3 Gitty Kits

Posted by Poorness Studios on January 8, 2020 at 9:20am 2 Comments

My CBG details

Posted by Paul scofield on January 1, 2020 at 9:22am 2 Comments

Latest Activity

the anonymous pick commented on Daniel Walter's photo
Thumbnail

idea

"Canadabis"
56 minutes ago
Mark Ballard posted a discussion

Finding Cigsr Boxes

Where are the best sources to look for cigar boxes?  Just starting out and need to pickup a stash…See More
1 hour ago
KOOL DOG HOOCH replied to KOOL DOG HOOCH's discussion Kool tool find!
"You're welcome and thanks cor the idea of the drop down shelf. I'm kicking around the…"
1 hour ago
Michael shrader added a discussion to the group Building a Cigar Box Guitar 101
Thumbnail

Questions on a first time electric build.

Hi all,I’m planning out my first electric build and have a couple of question. First, is there any…See More
2 hours ago
Myron Joe Hickel replied to Cause the Blue rat's discussion Beginner guitar playing tips by a seasoned player (40+ years )
"Thanks I'll practise your tips"
3 hours ago
Taffy Evans replied to KOOL DOG HOOCH's discussion Kool tool find!
"Thanks for the kind words Hooch, and your interesting but somewhat sad story. I have a couple of…"
3 hours ago
Don Paul liked Taffy Evans's photo
4 hours ago
Dave Lynas liked Poorness Studios's video
4 hours ago
Dave Lynas commented on Poorness Studios's video
Thumbnail

Doesn't Remind Me

"I find that a rhythm maker like a hand drum or shaker adds a lot. I’m a terrible drummer but…"
4 hours ago
Taffy Evans commented on Don Paul's blog post New Member need a little advice.
"Hi, Id say Keith is on the money with his reply. At the 12th I would have 2mm at most, and at the…"
4 hours ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Where the Soul of Man Never Dies

"Thanks Boyz. Yes a dulcimer would be nice indeed Derek. Thanks Uncle John. You are the Hymn Master.…"
4 hours ago
James Pobog replied to James Pobog's discussion fret (and fret marking) experiments
"Sounds pretty cool. You know, I tried something on a whim, but I had stained the wood so I…"
4 hours ago

Music

Loading…

© 2020   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->