I'm making my very first attempt at scarf joints for twin CBG's at the same time. Do I cut down the head thickness before or after I make the angle cut?

Views: 92

Reply to This

Replies to This Discussion

I prefer after, using an old hand plane which belonged to my father.

I always do it after, has worked well for over 10 builds

Should the extra material from the top or bottom of the headstock? Any pics please.

If you plan to remove the extra thickness of the head-stock after gluing it to the neck, then the only practical approach it to remove it from the top surface. If you have a table saw you can press the top of the head stock against the fence and cut the excess.

On the other hand, I've built about 45~50 CBGs over the past four years and always cut the excess thickness from the head stock "before" gluing it to the neck. My logic is that I can handle the small straight piece of head stock better than a glued up neck head stock. Besides, If I screw up the head stock before gluing, I can build another. If I screw up the cut after gluing, then I have to build both a new neck and head stock.

Obviously, you can do the cut before or after glue up, it's just a matter of preferences.

  1. I plan on removing before glue up using a router. I only have a chopsaw and router. I have a jig to place headstock in and the router acts like a power planer. Should I just remove 3" or the whole length of the head?

Hi Will, as they say there are many ways to skin a cat. When I do a scarf joint I cut it so that the sliced piece left on the neck shaft is the top face of the peghead. Where it's angle changes at the neck that is my nut position. 

I then flip the short piece over and glue it on the other side to complete the peghead. I measure from the nut position, say 3 or4 inches and trim off the the end to get peghead length.

i then measure from my nut position to the end of the neck shaft and cut that to suit the scale length and mounting to box method.

Then I remove wood from the back of the peghead only. Removing it from the front would move my nut position. If you had not allowed for that......trouble.......your neck could be too short.

if I have not explained this too well, sorry about that. Quite a few methods to thin the peg head using a jigsaw, bandsaw, tablesaw, router or sander/drumsander.

I thin from the end of the peghead to close to the nut position, leaving some material under the nut for strength.

Taff

understood perfectly. I stay away from sawing, belt Sanders, hand planes and wood rasp when I'm trying to get something on the level. I could screw up a bowling ball with a wet news paper before I got something cut a smoothed out.  Thanks for the heads up on jacking with the topside. I was just planing on doing that very thing on my one piece neck and pegboard cut from one solid piece of wood. That advice came just in time thanks.

Glad to help. 

I prefer to thin out the headstock piece before I cut the angle/degree piece. Gives me more material to clamp in a vise or jig.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Break angle for bridge

Started by Fantacone Box Works in Building Secrets, Tips, Advice, Discussion. Last reply by the anonymous pick 2 hours ago. 19 Replies

Slide off decals

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 9 hours ago. 2 Replies

Frets and fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion on Sunday. 0 Replies

Fret Sides Dressing

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Fantacone Box Works on Sunday. 6 Replies

Navigating this forum

Started by Fantacone Box Works in Performances, How to Play, Lessons, Concerts. Last reply by Fantacone Box Works on Sunday. 5 Replies

30.5" scale lay-out help needed please!

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner Jul 6. 15 Replies

Free Cigar Box Tablature Library

Started by Ben "C. B. Gitty" Baker in Performances, How to Play, Lessons, Concerts. Last reply by Brad Schoonmaker Jul 4. 12 Replies

Blog Posts

What wood is this?

Posted by Sean Murphy on July 16, 2019 at 10:48am 2 Comments

apology

Posted by Danny Gordon on July 13, 2019 at 7:30pm 3 Comments

Latest build

Posted by Sean Murphy on July 5, 2019 at 8:34am 5 Comments

Latest Activity

David L. replied to JP Lace Master's discussion Day 2: folding Travel Diddley Bow
"Nice work - all excellent (but SpongeBob rules :0))"
34 minutes ago
Richard Sundberg posted a video

Summertime......Floating Away

WOW, summer is half over. A walk-a-bout with my DMR Big Payback
1 hour ago
Beetlejuice! posted a photo

Pignose Amplifiers

-----------------The Pignose amp is a great amp to record with, they record vintage sounding slide…
1 hour ago
JP Lace Master replied to JP Lace Master's discussion Day 2: folding Travel Diddley Bow
"Thank you Tom and yes I do."
2 hours ago
JP Lace Master replied to JP Lace Master's discussion Day 2: folding Travel Diddley Bow
"Thank you Tom and yes I do."
2 hours ago
Dennis "Denbo" Goodinson liked Uncle John's video
2 hours ago
Dennis "Denbo" Goodinson commented on Uncle John's video
Thumbnail

Gone Gone Gone

"Another great rendition UJ. I don't know the song, but your stamp's all over it. …"
2 hours ago
Dennis "Denbo" Goodinson commented on cbgkent's video
Thumbnail

Juice box preamp

"Good video. I did this Shane Speal trick too with a defunct & gutted 60's Radio.…"
2 hours ago
John Welsh liked cbgkent's video
2 hours ago
the anonymous pick replied to Fantacone Box Works's discussion Break angle for bridge
"cool .. not to mention .. a lil  magic marker / ink pens/  paint /  wood burners…"
2 hours ago
Fantacone Box Works replied to Fantacone Box Works's discussion Break angle for bridge
"Neck has slight built in offset. I drop the rear 1/8" or a little more. Looks like the bridge…"
2 hours ago
Dennis "Denbo" Goodinson commented on Clarky's video
Thumbnail

Can't Stop - Red Hot Chili Peppers - Cigar Box Guitar Cover

"Super cover yet again Clarky, nice to see you back too, well, some of you lol :D"
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->