Saw for cutting fret slots - Cigar Box Nation2024-03-28T10:22:27Zhttps://www.cigarboxnation.com/forum/topics/saw-for-cutting-fret-slots?groupUrl=thebritsarecoming&commentId=2592684%3AComment%3A2300934&groupId=2592684%3AGroup%3A9610&feed=yes&xn_auth=noI've been using a Stanley fat…tag:www.cigarboxnation.com,2016-04-16:2592684:Comment:25735902016-04-16T21:44:40.261ZSimon Cartlidgehttps://www.cigarboxnation.com/profile/SimonCartlidge
I've been using a Stanley fatmax mini flush cut pull saw with a piece of wood taped to the side as a depth gauge. They're less than a tenner and the wood holds them rigid while still giving a thin cut. The brilliant thing about them is, if you're using dowel or anything like that for fret dots they'll cut them flush too (obviously, hence the name) so it's a tool that does 2 jobs in one. If you don't know what they're like, this is them:<br />
Stanley 020331 FatMax Mini Flush Cut Pull Saw…
I've been using a Stanley fatmax mini flush cut pull saw with a piece of wood taped to the side as a depth gauge. They're less than a tenner and the wood holds them rigid while still giving a thin cut. The brilliant thing about them is, if you're using dowel or anything like that for fret dots they'll cut them flush too (obviously, hence the name) so it's a tool that does 2 jobs in one. If you don't know what they're like, this is them:<br />
Stanley 020331 FatMax Mini Flush Cut Pull Saw <a href="https://www.amazon.co.uk/dp/B001QUOS0G/ref=cm_sw_r_cp_awd_5aRexbDYZ05HE" target="_blank">https://www.amazon.co.uk/dp/B001QUOS0G/ref=cm_sw_r_cp_awd_5aRexbDYZ05HE</a><br />
Incidentally, I don't use double sided tape because it can slip sideways. I got a great tip from Ben at Crimson Custom Guitars; a piece of masking tape on each surface you want to join, then superglue the two pieces of masking tape back to back. Much stronger than double sided, no sideways slip, no residue to clean after and templates etc separate really easily. I use a £1.50 junior hack saw…tag:www.cigarboxnation.com,2016-04-12:2592684:Comment:25692342016-04-12T13:18:37.244ZFomhorachhttps://www.cigarboxnation.com/profile/Fomhorach
<p>I use a £1.50 junior hack saw .. Very carefully.</p>
<p>I use a £1.50 junior hack saw .. Very carefully.</p> If you want a saw for slottin…tag:www.cigarboxnation.com,2016-01-22:2592684:Comment:24968472016-01-22T13:17:49.964ZChickenboneJohnhttps://www.cigarboxnation.com/profile/ChickenboneJohn
<p>If you want a saw for slotting fretboards, this is the proper tool for the job. Luthier's saw, 022" kerf, 250mm long Sheffield steel blade, brass back, rosewood handle. If you are only going to buy one specialist tool for guitar making, this is the one to have.</p>
<p><a href="http://chickenbonejohn.myshopify.com/collections/tools/products/fretting-saw-sheffield-steelhttp://" target="_blank">http://chickenbonejohn.myshopify.com/collections/tools/products/fretting-saw-sheffield-steel…</a></p>
<p>If you want a saw for slotting fretboards, this is the proper tool for the job. Luthier's saw, 022" kerf, 250mm long Sheffield steel blade, brass back, rosewood handle. If you are only going to buy one specialist tool for guitar making, this is the one to have.</p>
<p><a href="http://chickenbonejohn.myshopify.com/collections/tools/products/fretting-saw-sheffield-steelhttp://" target="_blank">http://chickenbonejohn.myshopify.com/collections/tools/products/fretting-saw-sheffield-steel</a></p>
<p>£24.50 including FREE UK shipping</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/306524841?profile=original"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/306524841?profile=RESIZE_1024x1024" height="426" width="721"></a>We also stock these lovely fretting hammers from Thor. UK made, they come with 2 nylon faces and spare extra hard and medium hard faces. The right tool for the job of driving in frets - nicely weighted at 250grammes with 25mm diameter replaceable heads.</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/306525962?profile=original"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/306525962?profile=RESIZE_1024x1024" height="427" width="721"></a><a href="http://chickenbonejohn.myshopify.com/collections/tools/products/fretting-hammer-by-thor" target="_blank">http://chickenbonejohn.myshopify.com/collections/tools/products/fretting-hammer-by-thor</a></p> Thanks, just bought one (a po…tag:www.cigarboxnation.com,2015-11-23:2592684:Comment:24447742015-11-23T13:37:32.446ZAnthony Collinshttps://www.cigarboxnation.com/profile/AnthonyCollins
<p>Thanks, just bought one (a pound less in Machine Mart). The wooden mitre box (Rolson) I bought at the same time is pretty shoddy but will probably do when modified with shims to make the slots fit the saw. Putting a micrometer on the saw blade I get 0.5mm.</p>
<p>Thanks, just bought one (a pound less in Machine Mart). The wooden mitre box (Rolson) I bought at the same time is pretty shoddy but will probably do when modified with shims to make the slots fit the saw. Putting a micrometer on the saw blade I get 0.5mm.</p> I've just done a repair job (…tag:www.cigarboxnation.com,2015-11-23:2592684:Comment:24447102015-11-23T00:15:48.016ZStuart Baldwinhttps://www.cigarboxnation.com/profile/StuartBaldwin
<p>I've just done a repair job (non cbg related) on some MDF furniture that involved drilling out blown screw holes and glueing dowels in. The pull saw described above was perfect for flush cutting the dowels, so I imagine it would be good for fretboard dots if they were made the same way. I suggest making sure that there are no scratches on some scrap first though. Watch your fingers though as the saw is very sharp and goes through a dowel with only a few strokes (and I was using 1/4 inch…</p>
<p>I've just done a repair job (non cbg related) on some MDF furniture that involved drilling out blown screw holes and glueing dowels in. The pull saw described above was perfect for flush cutting the dowels, so I imagine it would be good for fretboard dots if they were made the same way. I suggest making sure that there are no scratches on some scrap first though. Watch your fingers though as the saw is very sharp and goes through a dowel with only a few strokes (and I was using 1/4 inch ramin doweling).</p> And this would be good for tr…tag:www.cigarboxnation.com,2015-11-22:2592684:Comment:24445992015-11-22T14:49:06.673ZAnthony Collinshttps://www.cigarboxnation.com/profile/AnthonyCollins
<p>And this would be good for trimming fretboard dots too?</p>
<p>And this would be good for trimming fretboard dots too?</p> I'm a bit late to the party a…tag:www.cigarboxnation.com,2015-09-16:2592684:Comment:23940342015-09-16T23:45:45.238ZStuart Baldwinhttps://www.cigarboxnation.com/profile/StuartBaldwin
<p>I'm a bit late to the party as I've only just signed up.</p>
<p>The saw I use for frets is an Irwin pullsaw from Screwfix (<a href="http://www.screwfix.com/p/irwin-mini-dovetail-pull-saw-22tpi-6-165mm/21885#" target="_blank">http://www.screwfix.com/p/irwin-mini-dovetail-pull-saw-22tpi-6-165mm/21885#</a>). i can tap or press the fret wire into the resulting slots and it stays put without glue.</p>
<p>There's a video somewhere of Glenn Watt (I think) recommending the same saw for the same…</p>
<p>I'm a bit late to the party as I've only just signed up.</p>
<p>The saw I use for frets is an Irwin pullsaw from Screwfix (<a href="http://www.screwfix.com/p/irwin-mini-dovetail-pull-saw-22tpi-6-165mm/21885#" target="_blank">http://www.screwfix.com/p/irwin-mini-dovetail-pull-saw-22tpi-6-165mm/21885#</a>). i can tap or press the fret wire into the resulting slots and it stays put without glue.</p>
<p>There's a video somewhere of Glenn Watt (I think) recommending the same saw for the same job.</p> I use this.
work fine for me.…tag:www.cigarboxnation.com,2015-05-06:2592684:Comment:23009342015-05-06T18:15:33.949Zjohn mackayhttps://www.cigarboxnation.com/profile/johnmackay
<p>I use this.</p>
<p>work fine for me.…</p>
<p></p>
<p>I use this.</p>
<p>work fine for me.</p>
<p><a href="http://www.ebay.co.uk/itm/Zona-Razor-Saw-Set-3-in-1-PSA35-100/281657546114?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140107083358%26meid%3D852a218c8678462798eb7a40e29a22a1%26pid%3D100011%26rk%3D1%26rkt%3D1%26sd%3D271804802484" target="_blank">http://www.ebay.co.uk/itm/Zona-Razor-Saw-Set-3-in-1-PSA35-100/281657546114?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140107083358%26meid%3D852a218c8678462798eb7a40e29a22a1%26pid%3D100011%26rk%3D1%26rkt%3D1%26sd%3D271804802484</a></p> I have recently bought a prop…tag:www.cigarboxnation.com,2015-03-24:2592684:Comment:22667182015-03-24T18:16:20.324ZGary Charnockhttps://www.cigarboxnation.com/profile/GaryCharnock
<p>I have recently bought a proper fret slot cutting saw with guide from Stewart Macs but prior to that used a hacksaw with no problems</p>
<p>I have recently bought a proper fret slot cutting saw with guide from Stewart Macs but prior to that used a hacksaw with no problems</p> I just did a quick check and…tag:www.cigarboxnation.com,2015-02-07:2592684:Comment:22258842015-02-07T12:38:59.475ZDavid L.https://www.cigarboxnation.com/profile/DavidLloyd
I just did a quick check and modern fret wire can come with two different width tangs (the bit you tap into the slot) but the difference is so slight you can treat them the same.<br/>
<a rel="nofollow" href="http://liutaiomottola.com/construction/FretInstall.htm" target="_blank">http://liutaiomottola.com/construction/FretInstall.htm</a>
I just did a quick check and modern fret wire can come with two different width tangs (the bit you tap into the slot) but the difference is so slight you can treat them the same.<br/>
<a rel="nofollow" href="http://liutaiomottola.com/construction/FretInstall.htm" target="_blank">http://liutaiomottola.com/construction/FretInstall.htm</a>