For a 12 fret guitar and 635 mm scale length this site is at odds with two others.  Which is right?

The first three fret spacings (for brevity) from this site are 33.675; 65.461; 95.462

From the other two they are 35.640; 69.279; 101.031

I agree ths site specifies a three string instrument while the others assume a 6 string acoustic guitar or banjo etc., but the degee of variance is such that I don't want to start cuttting until I know for sure where to do so.

Any ideas?  Tks muchly.

Views: 121

Reply to This

Replies to This Discussion

According to my calculations - the three you listed from this site are for 600 mm scale length. So something is off - somewhere. 

well, another site is also at variance with CBN,  I confirm using data of 12 frets and 635 mm.  So I'm wondering why CBN is different to everyone else?.  I am not arguing, I just want to know. says " If you divide any scale length by the constant 17.817, you will get the distance from the front edge of the nut to the first fret. Here is one example: a scale length of 25.5" (650mm) divided by 17.817 gives 1.4312173" (36.482011mm), which can be rounded down to 1.431" (36.48mm)."

Therefore if three sites give the same figures, why is Cigar Box Nation different?

Hey Colin -  from where on this site are you getting these numbers? Can you please point me to the tool / post / discussion? Thanks. 

Ahhh! a problem solved.  The CBN site is, as you know, at

I did as per instructions, entering 635 in the yellow box not realising the figures were not changing from the 600 value; not sure why but thank you for helping.  Back to the workbench!

I will be trying the fret calculator at for my next build. 


3 reasons:  I have access to a laser cutter at the local makerspace and this tool can output the file type that I need to layout the fret board by inscribing the cuts and cut the tapered sides for the fret board.  I'll only etch the frets and finish the cuts by hand to the proper depth.

Secondly, I've already tried this with a layout for a 17 inch scale length fret board for a ukulele using a scrap board and it matches *exactly* with the template you can buy from CB Gitty. And I can add etch's for inlays or other things as i like.

And lastly...  since each uke I make has a slightly different scale length depending on the box, it's super easy to vary the scale length, the overhang, number of frets, and FB dimensions.

I have used fretfind2d a few times using my basic printer. The program creates a PDF. You may have to be careful printing it out as last time I used it the browser used its own PDF reader and printed it like a screenshot (about half the length it should have).  Using Adobe reader I had to change an option to print 100% rather than fit to page because Adobe reader's default shrank the printout just enough to get annoying. 

If you install adobe flash (don't ask why it's required) you can export the plans in DXF and SVG formats (others, too).  The DXF format is used by a lots of CNC equipment.  I've had no trouble with the scaling, either.

it also depends on your printer. always best to compare the calculated measurment with the print. some printers are not 100% even when told to print 100%.  page margins also interfere with propper printing. 

this is the fret calculator i used too... it can do fan frets too! anyone ever done a fan fret CBG??   yes you do need flash to see the save buttons.

635  mm scale length is 25".

Based on the 12th root of 2 rule the first fret would be 35.64 mm from the nut. the 2nd fret would be 69.28 mm from nut. The third would be 101.03 mm from nut. Of course the 12th fret would be 635/2 or 317.2mm from nut.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Preping boxes

Started by White Raven in Building Secrets, Tips, Advice, Discussion. Last reply by BrianQ. 21 hours ago. 3 Replies

This month's installment of "WHAT THE HECK IS IT?"

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by the anonymous pick on Sunday. 11 Replies

couple more pix

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by James Pobog on Saturday. 3 Replies

Wiring question

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by James Pobog on Saturday. 11 Replies

Blog Posts

Tab for Ry Cooder

Posted by Keith Gibson on September 30, 2019 at 12:44pm 2 Comments

Ducktail Run in James Dean Country

Posted by Rick Tish on September 29, 2019 at 9:57pm 1 Comment

Tiki mask guitar

Posted by Phil Stickings on September 27, 2019 at 12:39pm 5 Comments

Festival in the land that time forgot

Posted by Rick Tish on September 23, 2019 at 10:09am 2 Comments

Latest Activity

Steve Register replied to Steve Register's discussion First time using the Gitty Amp Kit
"I have an Epiphone guitar that I used to make sure it worked. Sounds good for a practice amp. I…"
7 minutes ago
Tom T replied to Steve Register's discussion First time using the Gitty Amp Kit
"Very clean build.Nice work.... Do you have anything to plug into it for a sound check?"
16 minutes ago
Bob "Ambrose" Negus liked 3 String Guitars's video
19 minutes ago
Bob "Ambrose" Negus liked Phil Stickings's photo
20 minutes ago
Bob "Ambrose" Negus liked Calim's photo
21 minutes ago
Bob "Ambrose" Negus liked AGP #'s photo
23 minutes ago
Bob "Ambrose" Negus commented on AGP #'s photo

AGP #370 - ''Stellar''

"It's Game, set and match AGP.  I like the subtle and minimalistic build approach. Stellar…"
24 minutes ago
Bob "Ambrose" Negus liked AGP #'s photo
24 minutes ago
Martin Owen commented on smojo's group The Brits are coming
"I get all my bits and bobs on eBay"
26 minutes ago
Bob "Ambrose" Negus liked AGP #'s photo
29 minutes ago
BrianQ. posted a status
"That last gitty gang show got me all riled up, got 3 different gutbuckets on the bench, plus a whamola just for the hell of it :)"
29 minutes ago
Steve Register posted a discussion

First time using the Gitty Amp Kit

Here is my first time building an amp using the kit from CBGitty. I think it turned out pretty good…See More
30 minutes ago



© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->