Learn the hard way, glued neck to Box bottom, now needs removal, any ideas short of cutting/slicing out with flat thin bladed saw?

Views: 238

Reply to This

Replies to This Discussion

Heat & a thin metal spatula? Maybe a pic would help?or try google?

Yes, post pics. There might be a hidden workaround you haven't noticed yet. 

What kind of glue?

Titebond

I had to remove a fretboard glued to a neck with Titebond III. I heated up the glue joint using a propane camping heater. My best recollection is that it took about 8-10minutes of moving the neck forward and back in front of the heat source to soften the glue sufficiently to easily pull the fretboard away from the neck. Not shilling for these guys, but the propane heater head was from Harbor Freight, @ $40.00. Threads onto a portable bar-b-que tank, heats my garage up pretty well for git buildin' on 50 degree days. That's pretty cold for So. Cal and an old man. I suppose that any good, hot, safe heat source can resolve a glue removal issue.

If you don’t have access to a neck steamer then the next best thing is an adjustable heat gun. Heat it up till you can pry a thin spatula underneath & then just work it away from the box,PATIENTLY while heating the area you’re prying. takes a little time, so work slowly for the best results? Good luck 

Hi Brent, I would like to know what went wrong to be able to offer a reliable remedy. Like lll Grean said a photo would help. There could be an easier fix.

it would also help others avoid the mistake.

Taff

Glued the neck to Box bottom with supports then found out later the neck was too high for micro pup surface mount pu clearance.

Hi, thanks Brent. Would placing a suitable thickness wooden shim under the pickup work. It could hidden under pickup by being same size, or made a fancy feature piece if nice timber.

Taff

I need to lower the pickup, neck is too high. Considering mounting the pickup under the lid so maybe a flush fir on top using a cover

Before building any guitar, I recommend to figure out what scale you want. From there, planning the position of the neck and pickups would be a lot easier.

What I do, I have a 2x4 that acts as my mannequin of planning scales and positioning of bridge and pickups.  A scale length is measured from the nut to the bridge area.  Lets say you would like to build a 25" scale; then you would measure with a ruler, 25 inches from the bone nut to the bridge (or tail too if its a wraparound). That should give you a clearer idea where to go when building.

Hi again, sorry Brent I'm confused. If the neck is too high [which is normally referenced off the face of the top] that to me means the fingerboard is too high so the strings would also be too high. This would put the strings further away from the pickup I would have thought.

On the other side of the coin, if the neck is too low,- so that the fingerboard is level with or below the top of the box -  then the strings would also be too low and too close to the pickup. Like the man said earlier a picture is worth a thousand words.

Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Forum

Discussion: Toothpick Frets?

Started by Habanera Hal in Feature Articles. Last reply by Paul yesterday. 26 Replies

Fret calculations

Started by Graham Wedepohl in Building Secrets, Tips, Advice, Discussion. Last reply by BrianQ. on Saturday. 5 Replies

Upright Ubass

Started by Titch the Clown in Building Secrets, Tips, Advice, Discussion. Last reply by Greg Potts Jun 20. 1 Reply

New here

Started by Clarence johnson in Performances, How to Play, Lessons, Concerts. Last reply by Road Rash Roy Jun 18. 13 Replies

Latest Activity

RTZGUITARS commented on Rope Walker Country Star's video
Thumbnail

Corsicana Girl (Dance Remix 21) - RopeWalker Country Star

"I heard on the X .    good stuff man"
1 hour ago
RTZGUITARS commented on Doug Thorsvik's video
1 hour ago
RTZGUITARS commented on RTZGUITARS's video
Thumbnail

Volcano

"Thanks Derek, recorded it as the Uke was going out the door so rushed could use a break"
1 hour ago
RTZGUITARS commented on RTZGUITARS's video
Thumbnail

Volcano

"Thanks PS, one of my favorite concerts was one of his"
1 hour ago
RTZGUITARS commented on RTZGUITARS's video
Thumbnail

Volcano

"Thanks Rev. John"
1 hour ago
RTZGUITARS commented on RTZGUITARS's video
Thumbnail

Volcano

"I got a  Jugg band song AD Ive done a few. I miss the Muckland Crooners. look them up here if…"
1 hour ago
RTZGUITARS commented on RTZGUITARS's video
Thumbnail

Volcano

"It the Prepper Cave Rope. "
1 hour ago
the anonymous pick commented on the anonymous pick's photo
Thumbnail

Win this swamp witch guitar !! St Louis fest raffle

"Get your tickets now  folks . you can win , even if you don't attend !!!! "
1 hour ago
Rope Walker Country Star commented on Rope Walker Country Star's video
Thumbnail

Corsicana Girl (Dance Remix 21) - RopeWalker Country Star

"Thanks DerekRose! It was fun to make."
3 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

I've Been Workin' on the Railroad: 3-String Cigar Box Guitar

"Thanks Kale! I don’t think I have heard this tune in decades and I never thought I would be…"
4 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

I Saw the Light: Weedwacker & Fishing Line 3-string Cigar Box Guitar

"Thanks Derek for the encouraging feedback. I Saw the Light has become a favorite in the last year.…"
4 hours ago
Derek Rose commented on Doug Thorsvik's video
Thumbnail

I Saw the Light: Weedwacker & Fishing Line 3-string Cigar Box Guitar

"The guitar sounds really good with those strings, Doug. I remember a few of the guys and ladies…"
4 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->