Replies to This Discussion

Permalink Reply by darryl kernaghan on December 7, 2013 at 9:04pm

mike,i think you will find that pup does have 2 wires inside 1 sheath,kinda like anntenna wire

• ▶ Reply

Permalink Reply by Mike D on December 7, 2013 at 9:55pm

now that i look at it closer i think i do see two wires coming out of the black and red covers. guess i just didnt look hard enough.

• ▶ Reply

Permalink Reply by the anonymous pick on December 7, 2013 at 9:11pm

it has  2  wires  in the  sleeve    . its     fine 

• ▶ Reply

Permalink Reply by ChickenboneJohn on December 7, 2013 at 10:24pm

Don't know what you guys think you are  seeing, but it's just regular shielded hook-up wire, like most pickups - one insulated inner (live) with an outer shielding (ground). Not quite sure how you'll place this under the string for a diddley bow in terms of which poles you'll line up under the strings, but I'm sure it will work! Wiring to a regular 1/4 jack is simple - solder the inner wire to the lug with makes contact with the tip , outer shield wire goes to the ground lug, ground the strings and you're good to go.

• ▶ Reply

Permalink Reply by darryl kernaghan on December 7, 2013 at 10:46pm

think that,s what i said john

• ▶ Reply

Permalink Reply by the anonymous pick on December 8, 2013 at 6:08am

yup. 

• ▶ Reply

Permalink Reply by Mike D on December 8, 2013 at 2:34am

where could I get an audio jack that has a wire connected to it that doesn't have another jack of some kind attached at the opposite end?

• ▶ Reply

Permalink Reply by Scott aka Farmer Ted on December 8, 2013 at 1:38am

That's a good price for a pair of general purpose humbuckers, but why not use something like this? It's a single pole hand wound pcikup I made for this diddly bow hockey stick cbg.

• ▶ Reply

Permalink Reply by Mike D on December 8, 2013 at 2:24am

how'd you do that?

• ▶ Reply

Permalink Reply by Scott aka Farmer Ted on December 8, 2013 at 2:27am

you can research pickup winding on Youtube...or ask someone to make it for you. perhaps

• ▶ Reply

Permalink Reply by Mike D on December 8, 2013 at 3:04am

so I looked up pickup winding on youtube like u said and right now im not feeling like going to all that trouble. I would rather just buy the ones I posted form ebay. lol

• ▶ Reply

Permalink Reply by Dan Sleep on December 8, 2013 at 3:06am

http://www.cigarboxnation.com/photo/hand-wound-pickups?context=user

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page