The black paint on this box scratches very easily. (I have been hiding scratches with a permanent marker.)

Should I spray some kind of clear coat on to protect it? If so, which is best for this?

Views: 451

Reply to This

Replies to This Discussion

To be clear , the wear in the photo above is not "natural " . just made to look that way ./( sand paper ,  and  instant coffee stain in appropriate areas )   ;-)

Right, it looks like unintentional ware, that’s the art

I would use spray lacquer. It dries in an hour so you can add As many Coats as you Want to get the finish that you want.
I use Modge-Podge. You'd be surprised how useful that stuff is for protecting box art. No problems with tone. Cheap, easy, and easy clean up.

I do a lot of artwork for a Nature Centre. One thing I do use is the clear coat exterior Varithane to coat projects. The SPRAY version which is also water based. This can seal the paint and the box.  Since you used a marker, I would not use anything with a thinner base in it that is for oils or laquers etc.  Water based products will not run the paint or the pen marks.  Always test something similar that you don't want to use or is scrap.  I have found this process to work very well!  I have even made play cameras with paints and insulation foams, and finished coated with this method.  The new exterior products are plastics, and they hold up much better than they used to do! If kid proof, it should also be instrument proof. I have also built , carved and created many different instruments, and used the spray methods for some of the finishes.  On wood boxes, don't forget to try out the old fashioned gun stock oil! That simply is the best oil out there and instruments can have anything from soft satin to high polish look when using gun stock oil. Hope this helps:) Cheers!

I sprayed some water-based Varathane on this box. Worked pretty well. I’m sure it will eventually get some natural wear, assuming the guitar ends up being a good one...it will just take a little more time.

I used clear Rust-Oleum on this one.

During the build I put blue tape on the areas I’ll be cutting and mask the rest of the box with some heavy weight paper to protect it. For finish I use Minwax fast drying Polyurethane on most of my cigar boxes. It goes well over everything. Spray the first coat light, then recoat within an hour and walk away.  Hit it lightly with 320 the next day and spray a third coat nice and thick then walk away. Let it cure for a couple days and repeat the process. 

That does work great. But, if you can only spray a couple of times, you can also brush on the rest of the coats. Gives it an artists look too as well as going on a bit thicker, but be careful not to create runs.  . Also,  you can also use gun stock oil to do the instruments:) That is an original finish for many instruments even today. I have had much success with using that process too:)  However with cardboard projects, not wood, the poly does tend to allow for more flex. Just my experiances...:)

Cheers!:) 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Frets and fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 2 hours ago. 4 Replies

Fret Sides Dressing

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Titch the Clown 4 hours ago. 8 Replies

Slide off decals

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 11 hours ago. 10 Replies

Perma grit sandpaper

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 23 hours ago. 2 Replies

30.5" scale lay-out help needed please!

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner yesterday. 20 Replies

Break angle for bridge

Started by Fantacone Box Works in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 28 Replies

Navigating this forum

Started by Fantacone Box Works in Performances, How to Play, Lessons, Concerts. Last reply by Fantacone Box Works on Sunday. 5 Replies

Blog Posts

Getting ready for next build

Posted by Sean Murphy on July 17, 2019 at 12:54pm 1 Comment

What wood is this?

Posted by Sean Murphy on July 16, 2019 at 10:48am 7 Comments

apology

Posted by Danny Gordon on July 13, 2019 at 7:30pm 3 Comments

Latest Activity

Andries D. EKER commented on Beetlejuice!'s video
Thumbnail

Earth Tilting Fence Busting Blues - Hey Kool Aid

"chuggaroo Board Billy ! cheeeeet !!  thats Playback !"
20 minutes ago
Dave Lynas liked Daniel Hulbert's video
20 minutes ago
Dave Lynas liked BUGGY (C)'s video
27 minutes ago
Dave Lynas commented on BUGGY (C)'s video
Thumbnail

Freeborn Man

"Great Jug band sound Buggy. Fit perfect with carny. Vaudeville!"
27 minutes ago
Andries D. EKER commented on Andries D. EKER's video
Thumbnail

Hobo Lament BCB 3 string 2019

"Thanks Dave ! cant sleep whit that toothache ? yep its a insperational 3 stringer!"
29 minutes ago
Andries D. EKER commented on BUGGY (C)'s video
Thumbnail

Freeborn Man

"Blackpool? "
32 minutes ago
Dave Lynas liked Andries D. EKER's video
33 minutes ago
Dave Lynas commented on Andries D. EKER's video
Thumbnail

Hobo Lament BCB 3 string 2019

"Awesome funky bass Andries. Funky Blues for real. I like the Owl head!"
33 minutes ago
Andries D. EKER commented on Dave Lynas's video
36 minutes ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Tooth Ache Blues

"Andries, I use Goldenseal as a rinse. It works good. I just need a dose of courage."
39 minutes ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Tooth Ache Blues

"Great Lion D. Uncle, I was real Blue. A durge is what it is."
41 minutes ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Tooth Ache Blues

"Oh Richard, i’m Giving the Twins and MaHotMa a break. Few friends were watching them. To…"
43 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->