Has any one used plywood for making a neck? If so what were the results?

David

Views: 2298

Reply to This

Replies to This Discussion

People have talked about doing that in the past, but I never heard back from anyone saying that it was successful or not. I would not try it nor recommend it.

I remember Lonnie Pitchford playing a diddley bow at the Chicago Blues Fest back in the 90's, which I remember as simply a guitar shape cut out of plywood, then electrified with a pickup. The neck was on the short side. I would think plywood would be ok for an electric diddley bow or lap steel design.

If you wanted to make a neck, I would think it would have to be laminated in several layers to make it thicker. I don't think the sound would be that great though. If you take a piece of wood and tap on it, then you take a piece of plywood and tap on it, the wood sounds good, while the plywood, not so much.

On the other hand, we're all about freedom of design and experimentation on here, so I wouldn't let that deter you from trying it out if you want to.

Yes. I do them all the time. I laminate two pieces of 3/4" thick 5-8 ply lauan together with Titebond wood glue and clamps; the pieces are usually about 1" deep, usually 36-42" long, and the width across the fretboard is 1.5." They sand and polish up real nice; olive oil, which is the stain / finish I use on my builds, brings out he ply laminations really nicely. I am now adding mahogany fretboards atop them, to hold real frets; my first couple were simply finishing nails bent over, stuck into holes drilled into the fretboard face, and Super Glued down.

I only do 3 and 4 stringers, 25 " scale; so far I haven't had to worry about bowing or bending; the necks are incredibly strong.

Do they sound as good as an oak, maple or mahogany neck? Nope. But most of the vibration is getting transferred to the box tops, which I make from 3/16" lauan plywood, and those do resonate well acoustically. I'm also building a violin out of the same 3/4" ply, for a theater prop; it will be playable.
Also, fergot to mention, the plies face up, vertical. If you try to lay em horizontal, the neck will bend under string tension. Glueing a separate hardwood fretboard atop the vertical plies also pretty much eliminates any side-bending forces.

Many commercial necks made with internal truss rods are essentially plywood; it's just that they are typically laminated out of hardwoods.

photos pls?

Yes. I challenged myself and made a neck out of laminated strips of cigar boxes. I probably will never do it again, but made for a very strong neck. Martin also makes a neck called a stratobond neck which is a type of plywood, I believe.

Gibson did the spectra-ply les pauls for a few years there too

Thanks, the guitar looks amazing. I will need some years practice to get any where near this standard.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

smilingdog1 commented on 3 String Blues's video
10 minutes ago
smilingdog1 liked 3 String Blues's video
11 minutes ago
smilingdog1 liked Glenn Kaiser's video
13 minutes ago
Doug Thorsvik posted a video

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 195th Zoom Mtg 03/25/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
18 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
18 hours ago
Kent Thurston updated their profile
19 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
19 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
19 hours ago
Poorness Studios liked A.D.EKER's video
21 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
22 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->