I'm new to the box guitar building world, I do have woodworking experience.
Just started designing and planning the guitar. 

Can someone run through the plans to check if I'm overlooking stuff or done my research wrong. :)
Please inform me, I'm here to learn before starting my first build because I know I'm going to learn from all the "mistakes" during the building process..

I'm planning to use oak for the neck and looking into wood for the box at this moment.

The plans are available for download (pdf) below. BTW the plans are in mm because I'm from the Netherlands. 

New version
Thanks to the great suggestions, I've made some changes to the plans V1.1 is now available! 
Made some changes to:

  • Positioning of the box
  • Support blocks inside the box
  • Added fret positions (via stewmac.com)
  • Added a volume knob to the setup

For the people who want to compare the versions, V1.0 is still available for download as PDF

v1.1



Views: 310

Attachments:

Reply to This

Replies to This Discussion

Hi Hans

Welcome and good luck with your first build. I can't really comment on your plans other than to say that they seem to look OK.

What I do advise is to look at the videos on YouTube by Del Puckett. There are many, including some great ones on neck making and some CBG beginners ones. I have learned a great deal from Del's videos

Thanks for your advice, I've been looking at them and really love them!

plans look great. dual piezo and neck pick is nice.  is that a 3 way switch ? 

As a first build this will be very good. you do know that there is no such thing as 1, they are addictive. 

my first guitar box wa the same as these dimensions but 275 long. 

Hey Timothy,
Yes, it's a 3-way switch, and I'm going to add a volume nob as well.
I'll share the progress and end result

Hello Hans,

Nice drawing. I'm glad to see that you are building a three-string, fretless guitar. Tuned to and open (or power) chord, it is a nice sounding instrument that is easy to learn to play. Without frets, the string height becomes less critical which help to make building easier. The hardtail bridge is (in my opinion) a good move. It is not as rustic as, say, a screw or bolt, but if you firmly secure it through the box and into the oak neck it will produce great sustain.

I didn't see any on scale length on the drawing, but maybe my old eyes missed it. Anyway, something in the 24" to 25" inch scale is most common (610~625 mm).

A Piezo  pickup has a good, gritty sound, but some people don't like the microphone effect that picks up a lot of box noise and string touching, but it really depends on your playing style. If you don't like it you can always try a magnetic pickup which is pretty inexpensive.

I think you will enjoy box guitars, They are quick to learn and you can join in with others to jam.

Keep us posted on progress

I'm planning on building a fretted one :) In the new plans, I added the fret positions. 
Pickup wise I'm going to use a piezo under the bridge and an MGB Seven Fitty Screamin Pickup

I've made some changes to my plans positioning of the box and some refinements

Thanks for the advice


The plans look fine Hans. I would use a fret calculator, Fret Position Calculator | stewmac.com although the fret length you`re using is close to a strat. Oak is great, strong and easy to work with and relatively inexpensive ;)

I`ve used all sorts of wood for boxes but to start with some 2mm ply will do nicely ( especially as your using pick ups)

From the plans it looks like you`re going to use a single coil pickup. But that, piezo and even under saddle pickups all have their merits.

One thing I can guarantee.... you will build one and you will HAVE to build more! It`s a very addictive hobby! 

Thanks, I've used the calculator and changed some other things added them to the new plans

I'll keep you posted

 I build fretless as well. Gonna try fretting soon, but I don't like to fret. It'll be interesting, no doubt. 

 I second that on Del Puckett. He was one of the first that I watched as well Learned a huge amount from him before my first build as well as recently. Jock is right about the beginner's video's, but Del gets rather advanced in his instruction on "tempered" and "Just" intonations and other types of tuning as well as the Golden ratio... Interesting stuff. I bought one of his fretboards that he offered for CBN members awhile back. VERY nice piece. Don't know if he is still doing that.

Thanks for the advice. I added frets on this one

made some adjustments to the plans and step by step it's getting better :)

Looks good to me . The only thing I would mention to consider is the  switch placement . As is ... it is pretty close to the jack input (factoring in the male cord  ends inserted  length ) . Just make sure it doesn't touch or come too close to the base of the switch inside .  Not to mention ,  where the switch is now , it may get in the way of playing  ( ie: switching off while playing  in a seated position ,( or angled between the legs )  hitting your pants or clothing . and getting an unwanted  switch off .)  There is also a possibility  of   accidentally  hitting the switch when adjusting volume or tone .. or even palm muting .

If this guitar is for you . Mock up how you play,  and where your hands . clothing  etc  may be an issue .  depending on that . it may be fine as is .

Everything else .. you've already over-thought  ;-)

 Good luck ;-)

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Forum

Licence plates

Started by Michael Myers in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd on Friday. 15 Replies

Completed Builds

Started by ThePracticalPeasant in Building Secrets, Tips, Advice, Discussion. Last reply by ThePracticalPeasant Oct 20. 5 Replies

Chords

Started by Mitchell Cutsinger in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Sep 29. 5 Replies

Blog Posts

Leonard Cohen Life

Posted by Keith Rearick on October 7, 2021 at 11:18am 0 Comments

CBGer’s Lament

Posted by Ghostbuttons on October 3, 2021 at 12:11am 0 Comments

Sasquatch!

Posted by Mark E. Martinsen on September 29, 2021 at 8:39pm 3 Comments

Prototyping with a big ol' wine box

Posted by Ben on September 23, 2021 at 4:00pm 0 Comments

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Latest Activity

Jack Gray posted a discussion

Anyone in or near Fayetteville, NC area building CBG’s? other than me.

Hello, anyone in the Fayetteville, NC area building CBG’s?other than me. Thanks……..JackSee More
2 hours ago
Chuck Hunsinger commented on Uncle John's video
2 hours ago
BrianQ. left a comment for Jimbo
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
3 hours ago
Profile IconJimbo, Bob Doyle and Jurgs joined Cigar Box Nation
4 hours ago
A.D.EKER commented on A.D.EKER's video
5 hours ago
A.D.EKER posted a video

Kind hearted Woman R. Johnson - A. D. Eker 2021

Something you whish for but dont allways meet, usely they are Dragons who try to suck you dry ,or mentaly hurt you by loving you not for what you are ,or do...
5 hours ago
3 String Blues commented on 3 String Blues's photo
Thumbnail

who can relate???

"yes lots of kids come here and my site!"
6 hours ago
Thomas "Duck" Petry commented on the anonymous pick's photo
Thumbnail

swamp witch guitars arsenal 5

"Nice job Mr. Pick. Looks like someone built it down in the mining camp."
6 hours ago
BrianQ. commented on Uncle John's photo
Thumbnail

Banjo on my Knee -stolen from AGP- please do not tell him.

"Good one, I used to look forward to reading the Far side in the Sunday paper :)"
6 hours ago
BrianQ. commented on Randy S. Bretz's photo
6 hours ago
BrianQ. liked Randy S. Bretz's photo
6 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP #446 - ''Jolly Jumbuck''

""Thanks UJ", Yep!, slowly getting the hang of it, should have it down pat after another…"
8 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->