Can someone help me with a diagram or good description on how to place a rod piezio pickup under the bone?  Does the bone go directly on the pickup or is the pickup in a channel under the saddle?

Also  how does one wire an 1/8 inch plug onto the 1/4 inch jack?  is there a simple wiring diagram available anywhere?

Thanks,

Steve

Views: 207

Reply to This

Replies to This Discussion

When i do my rod bridges, i cut a slot that goes all the way through the bridge base, it`s the same width as the rod about 1/8". The rod sits down in the slot, the bone saddle sits on top of the rod. The rods work from pressure on them from the strings on the saddle. Then i add a piece of veneer to the bottom of the bridge base and drill a small hole for the rod wire to go through. I cut off the 1/8" plug on the wire, fish the hot wire [ plastic coated ] out of the braided wire [ ground ] and solder them up to a regular input jack. Tip ; if you need to cut the rod shorter, cut it on the side, not down from the top. Also test it to make sure it`s working properly before you install it in the bridge base. I do this by having the rod wire set up for soldering, have a jig with 2 alligator clips soldered on a input jack. Clip the wires on the jig and plug the rod in, tap on the rod to see if it`s working correctly. If you look at the pic`s on my page you can see some of the other custom rod bridges i`ve made.

Randy S. Bretz, when you said "cut on the side, not the top". Are there markings like on a diode or physical characteristic such as a flat spot on a 'LED'? I've never seen one up close, but plan on using them. Also what is the shortest usable length without killing performance?

Kool dog, there’s an article on cutting rod piezos in the cigarboxguitar.com archives? If you scroll down towards the bottom of this page, there’s a link box to the archives? Cheers  :)

Thanks.

Sweet!  Thanks.

Steve

just to build on what Randy said I have found that the closer you get the rod to the strings the better the volume. Especially if you are not using a preamp. So I build some of my bridges with a spacer under rod to bring the rod up a little closer(bone or other bridge material is a bit shorter to bring it closer ) to the string

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Nut and #1 fret spacing.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 6 hours ago. 2 Replies

Zero fret/nut idea

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 18 hours ago. 8 Replies

Rescued ss can.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Saturday. 15 Replies

Looking for Builders and Players in Florida!

Started by Will "KOOL DOG HOOCH" Bonner in Fests and Concerts: Organizing and Promoting. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 15 Replies

Fun with a 2x4 Bass - Build Your Own

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Mike Parker on Thursday. 24 Replies

Secret codes?

Started by Will "KOOL DOG HOOCH" Bonner in Performances, How to Play, Lessons, Concerts. Last reply by Will "KOOL DOG HOOCH" Bonner Jun 17. 21 Replies

Latest Activity

Uncle John commented on Uncle John's video
Thumbnail

See That My Grave Is Kept Clean ~ By Blind Lemon Jefferson 1927

"Derek, I missed your comment.  Thank you, my friend."
6 minutes ago
gary herget commented on the anonymous pick's photo
Thumbnail

swamp witch guitars . because

"Every time I see this I find something new that I hadn't seen before. "
18 minutes ago
Art Prior commented on BeetleJuice!'s group Three string guitars
"Try a drop of clear nail polish--------works like locktite but its a little more "diy".…"
45 minutes ago
Paul Craig replied to Paul Craig's discussion New Used Guitar Day x 2
"The frets are a little low, but that makes for good slides. The pickups are awesome, sound like the…"
2 hours ago
Paul Craig replied to Paul Craig's discussion What's on your workbench?
"I know a guy with a Strat and he has 6 different loaded pickguards to swap out if he fancies a…"
3 hours ago
Paul Craig replied to Wal Callaby's discussion We build guitars
"Gibson is under new management now and if you haven't seen the prices on their new line up,…"
3 hours ago
Paul Craig replied to Wal Callaby's discussion We build guitars
"Whatever you play or build, eventually there will be a snob.  Oh that's not even a Cigar…"
3 hours ago
Shane Sylvester commented on Uncle John's photo
Thumbnail

Hobo Fiddle ~ 3 string

"whats the sound like"
4 hours ago
Shane Sylvester commented on Lee Custom Shop's photo
Thumbnail

2

"that would be a inverted dog bowl I guess very nice finish.thats a cool look with the  strings…"
4 hours ago
Shane Sylvester commented on Rob Ingram's photo
Thumbnail

Screen Shot 2013-12-15 at 1.12.00 PM

"love the natural look the tin lid rocks"
4 hours ago
Jeff 'Bones' Reilly commented on Jeff 'Bones' Reilly's photo
Thumbnail

Wicked Bucker antiquing

"Glad you approve UJ .. I got more moves than a snake ..... "
5 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->