Can someone help me with a diagram or good description on how to place a rod piezio pickup under the bone?  Does the bone go directly on the pickup or is the pickup in a channel under the saddle?

Also  how does one wire an 1/8 inch plug onto the 1/4 inch jack?  is there a simple wiring diagram available anywhere?

Thanks,

Steve

Views: 207

Reply to This

Replies to This Discussion

When i do my rod bridges, i cut a slot that goes all the way through the bridge base, it`s the same width as the rod about 1/8". The rod sits down in the slot, the bone saddle sits on top of the rod. The rods work from pressure on them from the strings on the saddle. Then i add a piece of veneer to the bottom of the bridge base and drill a small hole for the rod wire to go through. I cut off the 1/8" plug on the wire, fish the hot wire [ plastic coated ] out of the braided wire [ ground ] and solder them up to a regular input jack. Tip ; if you need to cut the rod shorter, cut it on the side, not down from the top. Also test it to make sure it`s working properly before you install it in the bridge base. I do this by having the rod wire set up for soldering, have a jig with 2 alligator clips soldered on a input jack. Clip the wires on the jig and plug the rod in, tap on the rod to see if it`s working correctly. If you look at the pic`s on my page you can see some of the other custom rod bridges i`ve made.

Randy S. Bretz, when you said "cut on the side, not the top". Are there markings like on a diode or physical characteristic such as a flat spot on a 'LED'? I've never seen one up close, but plan on using them. Also what is the shortest usable length without killing performance?

Kool dog, there’s an article on cutting rod piezos in the cigarboxguitar.com archives? If you scroll down towards the bottom of this page, there’s a link box to the archives? Cheers  :)

Thanks.

Sweet!  Thanks.

Steve

just to build on what Randy said I have found that the closer you get the rod to the strings the better the volume. Especially if you are not using a preamp. So I build some of my bridges with a spacer under rod to bring the rod up a little closer(bone or other bridge material is a bit shorter to bring it closer ) to the string

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Fretless cbg

Started by Caleb D Bennett in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans 9 hours ago. 3 Replies

We build guitars

Started by Wal Callaby in Other stuff - off topic, fun stuff, whatever. Last reply by Jerry Jordan 9 hours ago. 17 Replies

Open Gear Tuners

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Jerry Jordan 13 hours ago. 9 Replies

One Finger Lesson: Take Me Home Country Roads - VIDEO & TAB

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Chuck otto 15 hours ago. 2 Replies

Box fiddle #1

Started by Gervase Gallant in Building Secrets, Tips, Advice, Discussion. Last reply by Gervase Gallant yesterday. 6 Replies

Nut and #1 fret spacing.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Monday. 2 Replies

Zero fret/nut idea

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Sunday. 8 Replies

Rescued ss can.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Saturday. 15 Replies

Looking for Builders and Players in Florida!

Started by Will "KOOL DOG HOOCH" Bonner in Fests and Concerts: Organizing and Promoting. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 15 Replies

Fun with a 2x4 Bass - Build Your Own

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Mike Parker on Thursday. 24 Replies

Blog Posts

A Tale of Two Ukes

Posted by Poorness Studios on June 25, 2019 at 10:00am 1 Comment

Adventures in headstock-making

Posted by Sean Murphy on June 15, 2019 at 4:41pm 2 Comments

site bugs

Posted by the anonymous pick on June 13, 2019 at 8:05pm 6 Comments

Cheesecake Banjolele

Posted by James Matthews on May 21, 2019 at 7:14pm 3 Comments

Latest Activity

the anonymous pick commented on Ricky's photo
29 minutes ago
Wekasper updated their profile
44 minutes ago
Lonman commented on Cigarbox Slim's photo
Thumbnail

New Resonator

"real nice.  good job on the tin"
3 hours ago
Lonman posted a photo

first bass guitar

my first bass guitar went to its owner tonight. I enjoyed making this. I was perturbed that the CB…
3 hours ago
Mauricio Twelve commented on AGP #'s video
Thumbnail

AGP #356 ''LOWDM'' Paris Texas 25 May 2019

"Linda interpretação com melodia que me faz fechar os olhos e viajar pela…"
4 hours ago
Mauricio Twelve liked AGP #'s video
4 hours ago
Richard Sundberg commented on Richard Sundberg's video
Thumbnail

Hopeless. By George Jones Jr. with Richard Sundberg

"I’m just a studio musician haha! ! This is an outstanding song written and played, and sung…"
5 hours ago
BeetleJuice! commented on Daniel Walter's photo
Thumbnail

The Devil Dog.

"Red Dog!"
5 hours ago
Richard Sundberg commented on Richard Sundberg's video
Thumbnail

Hopeless. By George Jones Jr. with Richard Sundberg

"I think George sings a bit like Neil Young Danny. Thank you Danny!"
5 hours ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Fiddle Thing

"Thanks Poorness. Thanks Matthew. I could have a fiddle in every major key. :^) But really I have E,…"
5 hours ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Fiddle Thing

"Oh Nancy, a fancy Nancy Kat. Now that’s a little fiddle."
6 hours ago
charles byrum liked gary herget's photo
6 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->