Replies to This Discussion

Permalink Reply by Gene Robinson on February 24, 2013 at 7:22am

Next, cut a slot for the wires to exit the neck.

• ▶ Reply

Permalink Reply by Gene Robinson on February 24, 2013 at 7:24am

Then you can add your nicely soldered pick up with wires

• ▶ Reply

Permalink Reply by Gene Robinson on February 24, 2013 at 7:26am

Squirt some hot glue in the hole and get ready to stick it all together

• ▶ Reply

Permalink Reply by Gene Robinson on February 24, 2013 at 7:28am

Try to fill up the hole so it will be even with the top of the neck surface.  Get a piece of clear mylar plastic and lay over the still warm hot glue.  Try to get it as flat as possible with the neck.  Let the excess squeeze out of the hole the wire exits.

• ▶ Reply

Permalink Reply by Gene Robinson on February 24, 2013 at 7:31am

After the hot glue cools you can peel off the mylar (nothing sticks to mylar) and it should be a nice smooth surface that won't give you any problems when you put the glue down and stick the neck to the top of your box.  Buries it quite nicely and makes a pretty mellow sound when strung.  

I almost always use two pick ups now.  One buried like this, and I suspend one in high density foam just under the neck at the fret end of the neck inside the box.  With the C.B. Gitty gold three way switch, you can have the best of both worlds!  The jangly acoustic pickup, the more mellow buried pickup or both!

Gene

• ▶ Reply

Permalink Reply by Bill Powell on February 24, 2013 at 8:40am

Gene, thank you for the photos. I didn't realize that the piezo can be coated with glue and still function. Yeah, I know, new guy ...

;-)

• ▶ Reply

Permalink Reply by Gene Robinson on February 24, 2013 at 8:48am

Shoot, Bill.....  I consider myself to be pretty dang new to this too!  But these guys keep saying the same thing over and over.  "There are no rules, just try it!"

I think one of the plans I saw, or maybe it was here where they recommended getting a bottle cap and filling that with glue and embedding the piezo in that - then gluing that to the inside of the box.  I just decided to make my own hole instead of adding something else!

Gene

• ▶ Reply

Permalink Reply by Bill Powell on February 24, 2013 at 8:52am

Gene, makes sense. I used the Radio Shack piezo transducer and just screwed the plastic case to the bottom of the neck under the bridge. I have David Sutton's book, and he said the take the piezo out of the plastic, so I might be in error. I know the thing sure creates feedback!

• ▶ Reply

Permalink Reply by Richard G Caudill on February 24, 2013 at 12:37pm

Gene,, this is just a super cool idea  .. Never woulda thought of this ,, but u can betcha i"m a gonna use it !!!

always did not like the cut out in the neck to make the piezo fit  ..  tks man   !!

• ▶ Reply

Permalink Reply by Randy S. Bretz on February 24, 2013 at 12:45pm

Thats been done years ago here

• ▶ Reply

Permalink Reply by Gene Robinson on February 24, 2013 at 1:31pm

What's old is new......

That's the problem when these forums get really big.  These little tidbits get lost.  I did a search on piezo placement and got 8,562 hits..... well, maybe not that many, but it was more than I wanted to sift through :)

Gene

• ▶ Reply