I looked and haven't found any reference to this, so here goes, Has anyone embedded a disc Piezo under the fretboard? The reason I'm asking because the neck that I'm working on is laminated butcher block red oak and it has a beautiful resonance quality about it. I'm not a big fan of magnetic pick-ups for the simple reason they interfere with the looks of the guitar(my opinion). But I like the sound quality that they produce especially close to the fretboard. I'll have 19 frets on my project, so I thought I'd place the disc under the 12th or 17th. If it the sound I'm looking for happens great if not oh well! Cut the wire and move on! I'm placing a rod type in the bridge and a disc inside by the springs with the third under the fretboard and a switching arrangement. Has it been done? If so how was the sound? Any advice or thoughts?

Views: 328

Reply to This

Replies to This Discussion

many moons ago, back in the 80's when i first tried a piezo disc on my 12 string guitar i even clipped it to the headstock and got sound. my only concern with it being in the middle of the neck is that as it is basically a contact mic, it will pick up all the noise of your hand moving on the neck.  now it might turn out to be a cool sound.. 

no rules, give it a go , as you said if you dont like it just cut the wires..lol

I plan on a 1uf cap to cut down some of the high end noise plus a pre-amp.

I wouldn't do 1uf... maybe .01uf  or .001  but if you're using a preamp, skip the cap!  that function is built in for you.  with a preamp and a cap,  the sound will just get muddy...

Agree - no cap with a preamp because they have one built in. Missed that.

That was a typo on my part, you are right, it should be .01. Thanks for the heads-up about the pre-amp and a cap, there isn't any information other then a couple of videos.

A lot of 6 string electric guitar guys like to put a piezo in the neck pocket of a bolt on neck guitar. You have to cut a hole for it in the pocket of the body and attach the piezo to the neck. Some have also used rod style piezo between the neck and body near the end of the fretboard and add a preamp. It works great and sounds very close to a big body acoustic.

Funny thing I was contiplating a rod Piezo instead of a disc but I don't fully understand the the placement. I was wondering if I should cut a groove length ways in the neck or perpendicular for a short one. I was thinking under 18th fret or should I go disc. A pre-amp is in the works.

Rod piezos work best when the strings are in contact with them?

That was my understanding from what I read and heard, I'm putting one in the bridge, two disc, one under the fretboard and one by the resonator spring. Each one will have a switch to bring them online through a preamp.

If you put on in the neck pocket area, you do have to have some pressure from the neck to make it work. Getting the right amout of pressure withouth breaking the crystal is the hard part. It picks up the vibrations from the neck that flow through the whole guitar. You get a very woody tone without the sometimes harsh string tone that a bridge placement gets.

I can say that I don't know which piezo would be best in this application. Either type will work, but the rod type should work fine with a preamp.

Piezo in the neck pocket.,.,?? I'm off to try that.,., sounds like a good idea.,.,ya learn something new every day.,.,.,no rules.,.,.,!!

The way to do it is to lay the piezo in the neck pocket(between the neck screws) and draw a circle around it. Route/cut /chisel a cavity that's just deep enough so the piezo crystal doesn't break when the neck is bolted in place. Cut a channel for the wires to go into the box/body. Attach the piezo to the neck, fish the wires through the channel into the box and bolt the neck into place. Wire it up and Rock on baby.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Preping boxes

Started by White Raven in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans 16 hours ago. 2 Replies

This month's installment of "WHAT THE HECK IS IT?"

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by the anonymous pick yesterday. 11 Replies

couple more pix

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by James Pobog yesterday. 3 Replies

Baritone first pix

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig on Thursday. 7 Replies

Blog Posts

Tab for Ry Cooder

Posted by Keith Gibson on September 30, 2019 at 12:44pm 2 Comments

Ducktail Run in James Dean Country

Posted by Rick Tish on September 29, 2019 at 9:57pm 1 Comment

Tiki mask guitar

Posted by Phil Stickings on September 27, 2019 at 12:39pm 5 Comments

Festival in the land that time forgot

Posted by Rick Tish on September 23, 2019 at 10:09am 2 Comments

Latest Activity

Profile IconJimmy James, Chris Curtis, Randy Trout and 4 more joined Cigar Box Nation
29 minutes ago
Greg Henshaw commented on smojo's group The Brits are coming
"I've just seen the Terrys Chocolate Orange tin for this Christmas. It is crying out to be made…"
34 minutes ago
Kevin Keating commented on Adam Cripps's video
Thumbnail

Something In The Way (Nirvana cover)

"Nice!  Great cover n nice tone."
1 hour ago
Kevin Keating liked Adam Cripps's video
1 hour ago
Kevin Keating liked Elmar Zeilhofer's photo
1 hour ago
Bob Payton commented on Adam Cripps's video
Thumbnail

Something In The Way (Nirvana cover)

"Spot on! more please :)"
1 hour ago
jamezgang liked Daniel Walter's photo
1 hour ago
Kevin Keating posted a status
"Is there a short cut app for this site i can put on my phone?"
1 hour ago
Bob "Ambrose" Negus commented on Dave Lynas's photo
Thumbnail

under the hood.

"Nice "under the lid" shot."
2 hours ago
Bob "Ambrose" Negus commented on Dave Lynas's photo
Thumbnail

Coming home from the gig

"Hope everyone is ok... That cello is made of sturdy stuff... no crumple zones on that beauty!"
2 hours ago
Bob "Ambrose" Negus liked Dave Lynas's photo
2 hours ago
Bob "Ambrose" Negus liked Jeff 'Bones' Reilly's photo
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->