I looked and haven't found any reference to this, so here goes, Has anyone embedded a disc Piezo under the fretboard? The reason I'm asking because the neck that I'm working on is laminated butcher block red oak and it has a beautiful resonance quality about it. I'm not a big fan of magnetic pick-ups for the simple reason they interfere with the looks of the guitar(my opinion). But I like the sound quality that they produce especially close to the fretboard. I'll have 19 frets on my project, so I thought I'd place the disc under the 12th or 17th. If it the sound I'm looking for happens great if not oh well! Cut the wire and move on! I'm placing a rod type in the bridge and a disc inside by the springs with the third under the fretboard and a switching arrangement. Has it been done? If so how was the sound? Any advice or thoughts?

Views: 301

Reply to This

Replies to This Discussion

many moons ago, back in the 80's when i first tried a piezo disc on my 12 string guitar i even clipped it to the headstock and got sound. my only concern with it being in the middle of the neck is that as it is basically a contact mic, it will pick up all the noise of your hand moving on the neck.  now it might turn out to be a cool sound.. 

no rules, give it a go , as you said if you dont like it just cut the wires..lol

I plan on a 1uf cap to cut down some of the high end noise plus a pre-amp.

I wouldn't do 1uf... maybe .01uf  or .001  but if you're using a preamp, skip the cap!  that function is built in for you.  with a preamp and a cap,  the sound will just get muddy...

Agree - no cap with a preamp because they have one built in. Missed that.

That was a typo on my part, you are right, it should be .01. Thanks for the heads-up about the pre-amp and a cap, there isn't any information other then a couple of videos.

A lot of 6 string electric guitar guys like to put a piezo in the neck pocket of a bolt on neck guitar. You have to cut a hole for it in the pocket of the body and attach the piezo to the neck. Some have also used rod style piezo between the neck and body near the end of the fretboard and add a preamp. It works great and sounds very close to a big body acoustic.

Funny thing I was contiplating a rod Piezo instead of a disc but I don't fully understand the the placement. I was wondering if I should cut a groove length ways in the neck or perpendicular for a short one. I was thinking under 18th fret or should I go disc. A pre-amp is in the works.

Rod piezos work best when the strings are in contact with them?

That was my understanding from what I read and heard, I'm putting one in the bridge, two disc, one under the fretboard and one by the resonator spring. Each one will have a switch to bring them online through a preamp.

If you put on in the neck pocket area, you do have to have some pressure from the neck to make it work. Getting the right amout of pressure withouth breaking the crystal is the hard part. It picks up the vibrations from the neck that flow through the whole guitar. You get a very woody tone without the sometimes harsh string tone that a bridge placement gets.

I can say that I don't know which piezo would be best in this application. Either type will work, but the rod type should work fine with a preamp.

Piezo in the neck pocket.,.,?? I'm off to try that.,., sounds like a good idea.,.,ya learn something new every day.,.,.,no rules.,.,.,!!

The way to do it is to lay the piezo in the neck pocket(between the neck screws) and draw a circle around it. Route/cut /chisel a cavity that's just deep enough so the piezo crystal doesn't break when the neck is bolted in place. Cut a channel for the wires to go into the box/body. Attach the piezo to the neck, fish the wires through the channel into the box and bolt the neck into place. Wire it up and Rock on baby.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Zero fret/nut idea

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 9 minutes ago. 2 Replies

Secret codes?

Started by Will "KOOL DOG HOOCH" Bonner in Performances, How to Play, Lessons, Concerts. Last reply by Will "KOOL DOG HOOCH" Bonner 13 minutes ago. 15 Replies

Rescued ss can.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 14 hours ago. 8 Replies

Box fiddle #1

Started by Gervase Gallant in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner yesterday. 5 Replies

Building Advice

Started by Jonathan Buttazoni in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans yesterday. 2 Replies

Mini Documentary: Henry Dervaric's Cigar Box Guitars [Dandelion TV]

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by russell_e100@hotmail.com on Thursday. 3 Replies

Florida CBG Builders/Players

Started by L.J. in Performances, How to Play, Lessons, Concerts. Last reply by Will "KOOL DOG HOOCH" Bonner on Wednesday. 44 Replies

Ideas for supporting nuts

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Wednesday. 14 Replies

HTF did you get the CBG addiction.

Started by RTZGUITARS in Other stuff - off topic, fun stuff, whatever. Last reply by Will "KOOL DOG HOOCH" Bonner on Wednesday. 72 Replies

UPRIGHT BASS IN UK

Started by Chris Mitchell in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans on Wednesday. 2 Replies

Scarf joint question

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans on Wednesday. 9 Replies

Latest Activity

Will "KOOL DOG HOOCH" Bonner replied to Will "KOOL DOG HOOCH" Bonner's discussion Zero fret/nut idea
"How is the nut attached or is it free floating, held in place by string pressure?"
9 minutes ago
Will "KOOL DOG HOOCH" Bonner replied to Will "KOOL DOG HOOCH" Bonner's discussion Secret codes?
"LOL Both of you shut up! I got my toy, let me enjoy it before it gets broken with quantum mechanics…"
13 minutes ago
Richard Sundberg commented on Andries D. EKER's video
Thumbnail

Cripple Creek ( Trad; ) A .D . Eker 2019

"Nice take on this classic AD! I like the uptempo bounce to this one. Your very familiar with this…"
16 minutes ago
Richard Sundberg commented on Kevin Perlic's video
Thumbnail

Swamp Witch Guitars

"Superb video on all cylinders Kevin!"
23 minutes ago
Richard Sundberg commented on Dave Lynas's video
Thumbnail

FINGERIN The Blues

"The cathedral of Dave! The Tibian MaHot ma&pa team this time, sound and looks good!"
25 minutes ago
Richard Sundberg commented on BUGGY (C)'s video
Thumbnail

Feel ya way through life !

"Ramble on young man, sure sounds good! Nice clean production, great mix Buggy!"
29 minutes ago
Richard Sundberg commented on Dave Lynas's video
Thumbnail

Through the Candle Darkly

"The quiet candle opening is cool Dave. Beard and nose hair at risk here, careful! Beautiful playing…"
33 minutes ago
Gerrit Klaassen liked Calim's photo
37 minutes ago
Gerrit Klaassen liked Calim's photo
37 minutes ago
Randy S. Bretz posted photos
37 minutes ago
Richard Sundberg commented on Richard Sundberg's video
Thumbnail

Gallows & Crossroads

"2X4 stereo Derek! Diddley everywhere and diddling perhaps where I should fiddle. One of these days…"
38 minutes ago
Gerrit Klaassen liked Fergus Lester's photo
38 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->