I looked and haven't found any reference to this, so here goes, Has anyone embedded a disc Piezo under the fretboard? The reason I'm asking because the neck that I'm working on is laminated butcher block red oak and it has a beautiful resonance quality about it. I'm not a big fan of magnetic pick-ups for the simple reason they interfere with the looks of the guitar(my opinion). But I like the sound quality that they produce especially close to the fretboard. I'll have 19 frets on my project, so I thought I'd place the disc under the 12th or 17th. If it the sound I'm looking for happens great if not oh well! Cut the wire and move on! I'm placing a rod type in the bridge and a disc inside by the springs with the third under the fretboard and a switching arrangement. Has it been done? If so how was the sound? Any advice or thoughts?

Views: 303

Reply to This

Replies to This Discussion

many moons ago, back in the 80's when i first tried a piezo disc on my 12 string guitar i even clipped it to the headstock and got sound. my only concern with it being in the middle of the neck is that as it is basically a contact mic, it will pick up all the noise of your hand moving on the neck.  now it might turn out to be a cool sound.. 

no rules, give it a go , as you said if you dont like it just cut the wires..lol

I plan on a 1uf cap to cut down some of the high end noise plus a pre-amp.

I wouldn't do 1uf... maybe .01uf  or .001  but if you're using a preamp, skip the cap!  that function is built in for you.  with a preamp and a cap,  the sound will just get muddy...

Agree - no cap with a preamp because they have one built in. Missed that.

That was a typo on my part, you are right, it should be .01. Thanks for the heads-up about the pre-amp and a cap, there isn't any information other then a couple of videos.

A lot of 6 string electric guitar guys like to put a piezo in the neck pocket of a bolt on neck guitar. You have to cut a hole for it in the pocket of the body and attach the piezo to the neck. Some have also used rod style piezo between the neck and body near the end of the fretboard and add a preamp. It works great and sounds very close to a big body acoustic.

Funny thing I was contiplating a rod Piezo instead of a disc but I don't fully understand the the placement. I was wondering if I should cut a groove length ways in the neck or perpendicular for a short one. I was thinking under 18th fret or should I go disc. A pre-amp is in the works.

Rod piezos work best when the strings are in contact with them?

That was my understanding from what I read and heard, I'm putting one in the bridge, two disc, one under the fretboard and one by the resonator spring. Each one will have a switch to bring them online through a preamp.

If you put on in the neck pocket area, you do have to have some pressure from the neck to make it work. Getting the right amout of pressure withouth breaking the crystal is the hard part. It picks up the vibrations from the neck that flow through the whole guitar. You get a very woody tone without the sometimes harsh string tone that a bridge placement gets.

I can say that I don't know which piezo would be best in this application. Either type will work, but the rod type should work fine with a preamp.

Piezo in the neck pocket.,.,?? I'm off to try that.,., sounds like a good idea.,.,ya learn something new every day.,.,.,no rules.,.,.,!!

The way to do it is to lay the piezo in the neck pocket(between the neck screws) and draw a circle around it. Route/cut /chisel a cavity that's just deep enough so the piezo crystal doesn't break when the neck is bolted in place. Cut a channel for the wires to go into the box/body. Attach the piezo to the neck, fish the wires through the channel into the box and bolt the neck into place. Wire it up and Rock on baby.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

We build guitars

Started by Wal Callaby in Other stuff - off topic, fun stuff, whatever. Last reply by Blind Doughboy 1 hour ago. 19 Replies

Looking for Builders and Players in Florida!

Started by Will "KOOL DOG HOOCH" Bonner in Fests and Concerts: Organizing and Promoting. Last reply by Will "KOOL DOG HOOCH" Bonner 11 hours ago. 17 Replies

Fretless cbg

Started by Caleb D Bennett in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans yesterday. 3 Replies

One Finger Lesson: Take Me Home Country Roads - VIDEO & TAB

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Chuck otto yesterday. 2 Replies

Box fiddle #1

Started by Gervase Gallant in Building Secrets, Tips, Advice, Discussion. Last reply by Gervase Gallant on Monday. 6 Replies

Nut and #1 fret spacing.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Monday. 2 Replies

Zero fret/nut idea

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Sunday. 8 Replies

Rescued ss can.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Saturday. 15 Replies

Fun with a 2x4 Bass - Build Your Own

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Mike Parker Jun 20. 24 Replies

Blog Posts

A Tale of Two Ukes

Posted by Poorness Studios on June 25, 2019 at 10:00am 1 Comment

Adventures in headstock-making

Posted by Sean Murphy on June 15, 2019 at 4:41pm 2 Comments

site bugs

Posted by the anonymous pick on June 13, 2019 at 8:05pm 6 Comments

Cheesecake Banjolele

Posted by James Matthews on May 21, 2019 at 7:14pm 3 Comments

Latest Activity

Uncle John commented on Dave Nyberg's photo
Thumbnail

Build 003

"It looks good.  I think player's side sound holes improve the sound and experience for…"
1 minute ago
Richard Sundberg commented on Richard Sundberg's video
Thumbnail

Cigar Box Guitar/Surfing The Partagas Blues

"Thanks Dave! I used the chroma feature on Filmmaker Pro for the effect, at least it worked this…"
2 minutes ago
Uncle John commented on Spencer Lockhart's photo
Thumbnail

Ebony Maduro

"Great looking guitar. I especially like the way the sound hole grid looks like the fret board."
2 minutes ago
Uncle John commented on John Welsh's photo
Thumbnail

My Licence plate CBG.

"Very nice LPG and a fitting back ground."
3 minutes ago
Blind Doughboy replied to Wal Callaby's discussion We build guitars
"Agree 100% There is a lot of hype that comes from guitar companies . . . just like there's a…"
1 hour ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Fiddle Thing

"Thanks Richard. Ya, I have to reboot almost every time I use the FM app. It freezes when I try to…"
2 hours ago
Will "KOOL DOG HOOCH" Bonner posted a discussion

WELCOME To the 30 sum new members from yesterday

My inbox sounded like a fire alarm from all the new members(30) UK, CANADA, CHECK REPUBLIC, MEXICO,…See More
3 hours ago
Murray Macleod left a comment for Will "KOOL DOG HOOCH" Bonner
"Cheers ... glad to be here !"
3 hours ago
Will "KOOL DOG HOOCH" Bonner left a comment for Josh Dimmick
"Welcome to the hood! You will have a wealth of resources for any stage in your journey. Plans,…"
3 hours ago
Will "KOOL DOG HOOCH" Bonner left a comment for Murray Macleod
"Welcome to the asylum!"
4 hours ago
Eero Tapani Lehtinen liked Dave Lynas's photo
5 hours ago
Andries D. EKER commented on Andries D. EKER's video
Thumbnail

Walking the Dog VooDoo & Futura Guitar BCB Guitars

"Oke Danny ! All day long ! wauw that plenty of like there ! appriciated "D"thanks &…"
6 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->