I am wondering if adding a capacitor like an orange drop to a simple piezo circuit will help with the tone?  I am working with an antique box, and I wan't to keep it simple. Just a piezo wired to a jack. all volume and tone control coming from the amp. 

Will adding a capacitor change the tone from the piezo? make it a little less harsh maybe? I could just try it, but thought i would ask for advice first.

Views: 708

Reply to This

Replies to This Discussion

Well, I made up a couple of piezo's direct wired to a jack and soldered a. 022 cap from the positive to the negative lugs. Good news is, there is absolutely no hum, buzz or feedback. Bad news is there is absolutely no sound. I tried both my electronic amp and my tube amp. all the way to full volume, nothing. 

cut the cap off and I have all the regular characteristics of a piezo. I haven't decided whether to try a .01, or just use hot glue and a bottle cap. 

Sounds like you had a bad cap. It was acting like a short circuit. I would try several other caps. A multimeter should help troubleshoot the problem.

definitely possible. i will have to pick up a heat sink and a multimeter. then learn how to use it.

For the heat sink, just use a pair of needle nose pliers with a rubber band wrapped around the handle.

Hi WR, if you want to keep it simple, I recon use the tone control on the amp as you suggested, that way you have variable control of treble frequencies.

Mounting the piezo element as suggested on here by others will give a more pleasing sound from the guitar. I'd be asking myself how many capacitors have I got to fit till I find the one that works, and then its fixed at that one frequency.

A capacitor shunts much of the high frequencies to earth and lets the low ones pass. 

Talking about feed back. I find that the bass [low] frequencies are more likely to drive my guitar into feedback than the treble [high] frequencies, at the same volume setting.

In an acoustic guitar there are two sources of feed back, one is soundwaves from the amp/speaker matching the fundamental soundwaves of the guitars timber vibrations, and/or speaker soundwaves acting with the fundamental air resonance in the box to do the same thing. I think one source feeds the other. You can dampen the strings and the air/body effects will still cause feed back to continue.

Tip: put a heat sink on the legs of the capacitor being soldered so as not to damage it.

Taff

great advice. thanks.

they might have been crap capacitors, I dont have a multimeter or know how to use one, so checking them might be a challenge. As for damaging them when soldering, I never thought of that. I didn't use a heat sink.

Most multimeters don't verify for capacitance, just resistance, continuity, power and amps.

For the price of a capacitor, just change it and see.

There will be a difference between a capacitor that is mounted in parallel (as in on the jack) and in series like on most guitars. You might want to just change it up and see what happens.

Thing is, on guitars, the volume is changed by adding a resistance from the tip to the ground. The greater the resistance, the greater the volume. By putting a capacitor in the same way, you probably are shorting the jack (capacitor has too little resistance) and thus killing the sound.

I wondered about whether it would short the jack, electricity follows the path of least resistance. I'm not very patient as an experimenter, but I might still go down this road a bit further. It would be easy to just pot the hell out of the piezo and accept whatever it gives me. 

Ted Crocker came up with this scheme for piezo's. I've been interested in trying it, but haven't done so yet.

Hi yes I use that set up. I'm not an electronics person, but I suspect that is a treble bypass system on the volume pot. It allows the high frequencies to be heard at low volumes. The resister allows some of the other lower frequencies through for a bit more body to the tone. I solder the resistor to the same lugs as the cap. 

Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans yesterday. 8 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

The Old Way's BCB 2024

"Thank you Keith ! Glad you liked it ! much appreciated !!"
1 hour ago
BrianQ. liked Gary O'slide's video
8 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Flathead Diddley Bow

"Thanks. Wow! That becomes a spendy box Alan. They are pretty distinctive though. I have a few on…"
12 hours ago
Nigel McTrustry posted a video

Nigel McTrustry & The Hound Dogs are Loose! - Yellow Dog - Live - Original - Cigar Box Guitar

Nigel McTrustry & The Hound Dogs are Loose! Yellow Dog (McTrustry)@ The Cave Inn Brisbane, Australia.The song is currently on Spotify.
12 hours ago
AGP # commented on Doug Thorsvik's photo
Thumbnail

Flathead Diddley Bow

""Sweet Doug" :-), have seen quite a few Flathead Builds over the years, great looking…"
15 hours ago
AGP # liked David Dodt's photo
15 hours ago
AGP # liked David Dodt's photo
15 hours ago
AGP # liked David Dodt's photo
15 hours ago
AGP # liked Doug Thorsvik's photo
15 hours ago
AGP # liked Doug Thorsvik's photo
15 hours ago
AGP # liked Doug Thorsvik's photo
15 hours ago
AGP # liked Aaron Green's photo
15 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->